Add tmux-fzf for session/window/pane navigation

Many concurrent sessions with many panes each make it hard to track what is
running where, and moving a pane between windows means join-pane with a
hand-typed target, so it rarely gets done.

tmux-fzf gives a fuzzy-searchable list of every session, window and pane with
a live preview of each, and implements break/join/swap as pane actions --
which is the pane-movement gap. fzf is already in apt.global, arch.global and
brew.global, so no new packages are needed.

Checked out as a submodule rather than left for TPM to clone on first
prefix+I: ~/.tmux symlinks to config/tmux, so a TPM-installed plugin lands
inside this repo as untracked files. The submodule pins a version and
installs via the existing "git submodule update --init". TPM still sources it
from the @plugin line and can still update it.

prefix+F is the plugin's own top-level menu. prefix+P/W/S skip straight to
the pane, window and session panels. TMUX_FZF_CLIENT pins each action to the
client that opened it, as the plugin's own binding does -- run-shell has no
client context, so tmux otherwise targets the most recently active client,
which is wrong when a second client is attached to the same session.

No env-var configuration was needed: preview is already on by default, and
the TMUX_FZF_* variables are read from the environment only, so the README's
suggestion to set them in .tmux.conf is not valid tmux syntax.

Tested against tmux 3.5a and fzf 0.38.0: config parses with no errors, all
three bindings register, existing bindings are unaffected, TPM sources the
plugin and binds prefix+F, the three scripts pass bash -n, and the plugin's
fzf-version detection resolves to fzf-tmux with preview enabled. The
interactive picker itself needs a real terminal and is left to manual check.

.gitignore

@@ -1,7 +1,15 @@
 existing
 minimal
+install_local.sh
+bin/dotfiles-install
+config/i3/config.de
+config/i3/config.local
 config/gtk-3.0/bookmarks
 config/xfce4/xfconf/xfce-perchannel-xml
 config/xfce4/terminal
 config/themes
 config/icons
+config/VSCodium
+dependencies/dotfiles-local
+packages/*.local
+.claude

.gitmodules

@@ -16,3 +16,12 @@
 [submodule "dependencies/gruvbox"]
 	path = dependencies/gruvbox
 	url = https://github.com/morhetz/gruvbox
+[submodule "config/tmux/plugins/tpm"]
+	path = config/tmux/plugins/tpm
+	url = https://github.com/tmux-plugins/tpm
+[submodule "dependencies/fzf"]
+	path = dependencies/fzf
+	url = https://github.com/junegunn/fzf.git
+[submodule "config/tmux/plugins/tmux-fzf"]
+	path = config/tmux/plugins/tmux-fzf
+	url = https://github.com/sainnhe/tmux-fzf

bin/archlinux-keyring-wkd-sync

@@ -0,0 +1,64 @@
+#!/bin/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+#
+# Update all locally existing PGP keys in pacman's gnupg keyring, that are
+# relevant for Arch Linux packaging using the distribution's Web Key Directory
+# (WKD).
+# This ensures, that new signatures on already existing keys are fetched before
+# a new version of archlinux-keyring is installed. Fetching signatures early
+# prevents marginal trust issues with packages that are signed by keys which
+# only gain full trust when updating to a new version of archlinux-keyring in
+# that same system upgrade action.
+
+set -eu
+
+readonly main_key_domain_match="@master-key.archlinux.org$"
+readonly packager_domain_match="@archlinux.org$"
+readonly homedir="$(pacman-conf GPGDir)"
+
+domain_match=""
+uid=""
+gpg_locate_external=(
+    # force update a key using WKD
+    gpg
+    --homedir
+    "$homedir"
+    --quiet
+    --no-permission-warning
+    --auto-key-locate
+    "clear,nodefault,wkd"
+    --locate-external-keys
+)
+# a list of <fingerprint> <mbox> tuples of all keys in the keyring
+# e.g.:
+# C7E7849466FE2358343588377258734B41C31549 dvzrv@archlinux.org
+# 8FC15A064950A99DD1BD14DD39E4B877E62EB915 svenstaro@gmail.com
+fingerprint_mboxes="$(
+    gpg --homedir "$homedir" --no-permission-warning --list-keys --list-options show-only-fpr-mbox
+)"
+
+# a list of <fingerprints> of all revoked keys and keys that have no valid main
+# key signatures
+old_fingerprints="$(
+    gpg --homedir "$homedir" --no-permission-warning --list-keys --with-colons |
+    awk -F: '$1 == "pub" && $2 ~ /-|q|r/ { getline; print $10 }'
+)"
+
+if (( EUID != 0 )); then
+     printf "This script must be run as root.\n" >&2
+     exit 1
+fi
+
+# first update the main signing keys, then the packager keys
+for domain_match in "$main_key_domain_match" "$packager_domain_match"; do
+    while read -ra fpr_email; do
+        if [[ ${fpr_email[1]} =~ $domain_match && ! "$old_fingerprints" =~ ${fpr_email[0]} ]]; then
+            printf "Refreshing key %s with UID %s...\n" "${fpr_email[0]}" "${fpr_email[1]}"
+            "${gpg_locate_external[@]}" "${fpr_email[1]}"
+        else
+            printf "Skipping key %s with UID %s...\n" "${fpr_email[0]}" "${fpr_email[1]}"
+        fi
+    done <<< "$fingerprint_mboxes"
+done
+

bin/clipboard-copy

@@ -0,0 +1,45 @@
+#!/bin/sh
+# Copy stdin to the system clipboard, regardless of platform or how deep in
+# ssh/tmux this shell is: prefer a local clipboard tool for the current
+# display server, and fall back to a single plain OSC 52 write when no local
+# tool is available (e.g. a headless remote host). Any tmux hops in between
+# here and the real terminal relay that onward themselves, recursively, via
+# the pane-set-clipboard hook in tmux.conf -- this doesn't need to know or
+# guess how many hops there are.
+if command -v pbcopy >/dev/null 2>&1; then
+    exec pbcopy
+elif [ -n "$WAYLAND_DISPLAY" ] && command -v wl-copy >/dev/null 2>&1; then
+    # wl-copy/xclip both hold the selection by staying alive as a background
+    # process (X11/Wayland selections have no central store -- the owner has
+    # to serve paste requests live). setsid -f detaches that process from
+    # our session so tmux's copy-pipe job cleanup can't kill it right after.
+    setsid -f wl-copy
+elif [ -n "$DISPLAY" ] && command -v xclip >/dev/null 2>&1; then
+    setsid -f xclip -selection clipboard
+else
+    data=$(base64 | tr -d '\n')
+    # /dev/tty needs this process's own session to have a controlling
+    # terminal, but a job spawned by nvim's clipboard provider doesn't get
+    # one (nvim's job-spawning doesn't establish a ctty for children). Nvim
+    # itself also isn't a single process: the one actually spawning jobs is
+    # a `nvim --embed` core process with no tty of its own (shown as `?` in
+    # ps) -- the real terminal belongs to a separate parent UI process. Walk
+    # up the process tree past any tty-less ancestors to find it.
+    real_tty=""
+    pid="$PPID"
+    i=0
+    while [ "$i" -lt 10 ] && [ -n "$pid" ] && [ "$pid" != "0" ]; do
+        t=$(ps -o tty= -p "$pid" 2>/dev/null | tr -d ' ')
+        if [ -n "$t" ] && [ "$t" != "?" ]; then
+            real_tty="/dev/$t"
+            break
+        fi
+        pid=$(ps -o ppid= -p "$pid" 2>/dev/null | tr -d ' ')
+        i=$((i + 1))
+    done
+    if [ -n "$real_tty" ] && [ -w "$real_tty" ]; then
+        printf '\033]52;c;%s\a' "$data" > "$real_tty"
+    else
+        printf '\033]52;c;%s\a' "$data" > /dev/tty
+    fi
+fi

bin/docker-compose-bump

@@ -0,0 +1,5 @@
+#!/bin/bash
+
+docker compose pull
+docker compose down
+docker compose up -d

bin/docker-compose-restart

@@ -0,0 +1,4 @@
+#!/bin/bash
+
+docker compose down
+docker compose up -d

bin/docker-compose-update-recursive

@@ -0,0 +1,13 @@
+#!/bin/bash
+
+find . -type f -name "docker-compose.y*ml" -exec dirname {} \; | while read dir
+do
+  if [[ "$dir" != *"DEPRECATED"* ]] && [[ "$dir" != *"MIGRATED"* ]] ; then
+      pushd "$dir"
+      docker compose down
+      docker compose pull
+      docker compose up -d
+      popd
+  fi
+done
+

bin/gitea-pr

@@ -0,0 +1,214 @@
+#!/bin/bash
+set -euo pipefail
+
+GITEA_TOKEN_FILE="${GITEA_TOKEN_FILE:-$HOME/.config/gitea/token}"
+
+function usage() {
+    echo "Usage: gitea-pr create [--title TITLE] [--body BODY] [--base BRANCH]"
+    echo "       gitea-pr comments PR_NUMBER"
+    echo "       gitea-pr merge PR_NUMBER"
+    echo ""
+    echo "Requires GITEA_SSH_HOST and GITEA_API set in the environment (e.g. in" \
+         "your shell profile), and a token at $GITEA_TOKEN_FILE (or GITEA_TOKEN" \
+         "set for this invocation only)."
+}
+
+function require_config() {
+    if [ -z "${GITEA_SSH_HOST:-}" ]; then
+        echo "GITEA_SSH_HOST is not set. Add 'export GITEA_SSH_HOST=<gitea ssh hostname>'" \
+             "(e.g. gitbox.bradina.localdomain) to ~/.profile.local" >&2
+        exit 1
+    fi
+    if [ -z "${GITEA_API:-}" ]; then
+        echo "GITEA_API is not set. Add 'export GITEA_API=https://<gitea host>/api/v1'" \
+             "(e.g. https://gitbox.branderson.io/api/v1) to ~/.profile.local" >&2
+        exit 1
+    fi
+}
+
+function require_token() {
+    if [ -z "${GITEA_TOKEN:-}" ] && [ -f "$GITEA_TOKEN_FILE" ]; then
+        GITEA_TOKEN=$(<"$GITEA_TOKEN_FILE")
+    fi
+    if [ -z "${GITEA_TOKEN:-}" ]; then
+        echo "No Gitea token found. Generate one in the Gitea web UI" \
+             "(Settings > Applications, scopes write:repository + write:issue)" \
+             "and save it to $GITEA_TOKEN_FILE (chmod 600), or set GITEA_TOKEN" \
+             "in the environment for this invocation only." >&2
+        exit 1
+    fi
+}
+
+# Feeds the auth header to curl as a config on stdin rather than as an
+# argument. Command lines are world-readable through /proc, so `-H
+# "Authorization: token $GITEA_TOKEN"` exposes the token to every other
+# process on the host for as long as the request runs - and to anything that
+# scrapes `ps` output, including the agents this repo exists to sandbox.
+# printf is a bash builtin, so the token never lands in another argv.
+function gitea_api() {
+    printf 'header = "Authorization: token %s"\n' "$GITEA_TOKEN" |
+        curl -sS -w '\n%{http_code}' -K - "$@"
+}
+
+function gitea_owner_repo() {
+    local remote_url host owner_repo
+    remote_url=$(git remote get-url origin 2>/dev/null) || {
+        echo "No 'origin' remote found in this repository" >&2
+        exit 1
+    }
+    host=$(echo "$remote_url" | sed -E 's#^[^@]+@([^:]+):.*#\1#')
+    if [ "$host" != "$GITEA_SSH_HOST" ]; then
+        echo "origin remote ($remote_url) is not on $GITEA_SSH_HOST; gitea-pr only supports this host" >&2
+        exit 1
+    fi
+    owner_repo=$(echo "$remote_url" | sed -E 's#^[^@]+@[^:]+:##; s#\.git$##')
+    echo "$owner_repo"
+}
+
+if [ "$#" -lt 1 ]; then
+    usage
+    exit 1
+fi
+
+subcommand="$1"
+shift
+
+case "$subcommand" in
+    create|comments|merge)
+        require_config
+        require_token
+        owner_repo=$(gitea_owner_repo)
+        owner="${owner_repo%%/*}"
+        repo="${owner_repo##*/}"
+        ;;
+    *)
+        usage
+        exit 1
+        ;;
+esac
+
+case "$subcommand" in
+    create)
+        title=""
+        body=""
+        base=""
+        while [ "$#" -gt 0 ]; do
+            case "$1" in
+                --title) title="$2"; shift 2 ;;
+                --body) body="$2"; shift 2 ;;
+                --base) base="$2"; shift 2 ;;
+                *) echo "Unknown option: $1" >&2; usage; exit 1 ;;
+            esac
+        done
+        body="**Summary generated by LLM agent**
+
+${body}"
+
+        current_branch=$(git rev-parse --abbrev-ref HEAD)
+        if [ "$current_branch" = "HEAD" ]; then
+            echo "Detached HEAD: check out the feature branch before creating a PR" >&2
+            exit 1
+        fi
+
+        if [ -z "$base" ]; then
+            base=$(git symbolic-ref refs/remotes/origin/HEAD 2>/dev/null | sed 's#refs/remotes/origin/##' || true)
+            base="${base:-main}"
+        fi
+
+        response=$(gitea_api "${GITEA_API}/repos/${owner}/${repo}/pulls?state=open")
+        http_code=$(echo "$response" | tail -1)
+        json=$(echo "$response" | sed '$d')
+        if [ "$http_code" -lt 200 ] || [ "$http_code" -ge 300 ]; then
+            echo "Failed to check for an existing PR (HTTP $http_code):" >&2
+            echo "$json" >&2
+            exit 1
+        fi
+        existing_url=$(echo "$json" | jq -r --arg head "$current_branch" --arg base "$base" \
+            '.[] | select(.head.ref == $head and .base.ref == $base) | .html_url' | head -1)
+        if [ -n "$existing_url" ]; then
+            echo "$existing_url"
+            exit 0
+        fi
+        if [ -z "$title" ]; then
+            title="$current_branch"
+        fi
+
+        response=$(gitea_api -X POST "${GITEA_API}/repos/${owner}/${repo}/pulls" \
+            -H "Content-Type: application/json" \
+            -d "$(jq -n --arg head "$current_branch" --arg base "$base" --arg title "$title" --arg body "$body" \
+                '{head: $head, base: $base, title: $title, body: $body}')")
+        http_code=$(echo "$response" | tail -1)
+        json=$(echo "$response" | sed '$d')
+
+        if [ "$http_code" -lt 200 ] || [ "$http_code" -ge 300 ]; then
+            echo "Failed to create PR (HTTP $http_code):" >&2
+            echo "$json" >&2
+            exit 1
+        fi
+        echo "$json" | jq -r '.html_url'
+        ;;
+    comments)
+        pr_number="${1:-}"
+        if [ -z "$pr_number" ]; then
+            echo "Usage: gitea-pr comments PR_NUMBER" >&2
+            exit 1
+        fi
+
+        echo "=== Issue comments ==="
+        response=$(gitea_api "${GITEA_API}/repos/${owner}/${repo}/issues/${pr_number}/comments")
+        http_code=$(echo "$response" | tail -1)
+        json=$(echo "$response" | sed '$d')
+        if [ "$http_code" -lt 200 ] || [ "$http_code" -ge 300 ]; then
+            echo "Failed to fetch issue comments (HTTP $http_code):" >&2
+            echo "$json" >&2
+            exit 1
+        fi
+        echo "$json" | jq -r '.[] | "[\(.user.login) @ \(.created_at)]\n\(.body)\n"'
+
+        echo "=== Reviews ==="
+        response=$(gitea_api "${GITEA_API}/repos/${owner}/${repo}/pulls/${pr_number}/reviews")
+        http_code=$(echo "$response" | tail -1)
+        reviews_json=$(echo "$response" | sed '$d')
+        if [ "$http_code" -lt 200 ] || [ "$http_code" -ge 300 ]; then
+            echo "Failed to fetch reviews (HTTP $http_code):" >&2
+            echo "$reviews_json" >&2
+            exit 1
+        fi
+        echo "$reviews_json" | jq -r '.[] | select(.body != "") | "[\(.user.login) @ \(.submitted_at) — \(.state)]\n\(.body)\n"'
+
+        echo "=== Inline review comments ==="
+        review_ids=$(echo "$reviews_json" | jq -r '.[] | select(.comments_count > 0) | .id')
+        for review_id in $review_ids; do
+            response=$(gitea_api \
+                "${GITEA_API}/repos/${owner}/${repo}/pulls/${pr_number}/reviews/${review_id}/comments")
+            http_code=$(echo "$response" | tail -1)
+            json=$(echo "$response" | sed '$d')
+            if [ "$http_code" -lt 200 ] || [ "$http_code" -ge 300 ]; then
+                echo "Failed to fetch comments for review ${review_id} (HTTP $http_code):" >&2
+                echo "$json" >&2
+                exit 1
+            fi
+            echo "$json" | jq -r '.[] | "[\(.user.login) @ \(.path):\(.line // "?")]\n\(.body)\n"'
+        done
+        ;;
+    merge)
+        pr_number="${1:-}"
+        if [ -z "$pr_number" ]; then
+            echo "Usage: gitea-pr merge PR_NUMBER" >&2
+            exit 1
+        fi
+
+        response=$(gitea_api -X POST "${GITEA_API}/repos/${owner}/${repo}/pulls/${pr_number}/merge" \
+            -H "Content-Type: application/json" \
+            -d '{"Do": "merge"}')
+        http_code=$(echo "$response" | tail -1)
+        json=$(echo "$response" | sed '$d')
+
+        if [ "$http_code" -lt 200 ] || [ "$http_code" -ge 300 ]; then
+            echo "Failed to merge PR #${pr_number} (HTTP $http_code):" >&2
+            echo "$json" >&2
+            exit 1
+        fi
+        echo "Merged PR #${pr_number}"
+        ;;
+esac

bin/postgres-docker-backup

@@ -0,0 +1,18 @@
+#!/bin/bash
+function usage() {
+    echo "Usage: postgres-docker-backup container_name db_user dump_file"
+}
+
+if [[ ! "$#" == 3 ]]; then
+    usage
+    exit 1
+fi
+container_name="$1"
+db_user="$2"
+dump_file="$3"
+if [ -z "$container_name" ] || [ -z "$db_user" ] || [ -z "$dump_file" ]; then
+    usage
+    exit 1
+fi
+
+docker exec "$container_name" '/bin/sh' -c "pg_dumpall -U $db_user" > $dump_file

bin/postgres-docker-psql

@@ -0,0 +1,18 @@
+#!/bin/bash
+
+function usage() {
+    echo "Usage: postgres-docker-restore container_name db_user"
+}
+
+if [[ ! "$#" == 2 ]]; then
+    usage
+    exit 1
+fi
+container_name="$1"
+db_user="$2"
+if [ -z "$container_name" ] || [ -z "$db_user" ]; then
+    usage
+    exit 1
+fi
+
+docker exec -it "$container_name" '/bin/sh' -c "psql -U $db_user"

bin/postgres-docker-restore

@@ -0,0 +1,20 @@
+#!/bin/bash
+
+function usage() {
+    echo "Usage: postgres-docker-restore container_name db_user dump_file"
+    echo "  Note that dump_file is relative to docker filesystem and must be mounted"
+}
+
+if [[ ! "$#" == 3 ]]; then
+    usage
+    exit 1
+fi
+container_name="$1"
+db_user="$2"
+dump_file="$3"
+if [ -z "$container_name" ] || [ -z "$db_user" ] || [ -z "$dump_file" ]; then
+    usage
+    exit 1
+fi
+
+docker exec -it "$container_name" '/bin/sh' -c "psql -U $db_user < $dump_file"

bin/tmux-clipboard-relay

@@ -0,0 +1,8 @@
+#!/bin/sh
+# Read clipboard content on stdin (e.g. from `tmux save-buffer -`) and write
+# it as a raw OSC 52 escape sequence directly to the given tty device path.
+# Intended to be called from tmux's pane-set-clipboard hook as:
+#   tmux save-buffer - | tmux-clipboard-relay "#{client_tty}"
+tty_path="$1"
+data=$(base64 | tr -d '\n')
+printf '\033]52;c;%s\a' "$data" > "$tty_path"

bin/update-wallpaper

@@ -0,0 +1,77 @@
+#!/bin/bash
+# TODO: Dotfiles may be in a different place
+if [ ! -f "$HOME/.dotfiles-config" ]; then
+    echo "$HOME/.dotfiles-config not found, please run dotfiles/install.sh to create it"
+    exit 1
+fi
+source "$HOME/.dotfiles-config"
+source "$DOTFILES_DIR/functions.sh"
+
+# XAUTHORITY file may be in /tmp or it may be ~/.XAUTHORITY
+if [ -f "$HOME/.Xauthority" ]; then
+    export XAUTHORITY="$HOME/.Xauthority"
+else
+    auth_path="$(find /tmp -maxdepth 1 -name "xauth_*")"
+    if [ ! -z "$auth_path" ]; then
+        export XAUTHORITY="$auth_path"
+    else
+        echo "No Xauthority file found. Exiting"
+        exit 1
+    fi
+fi
+wallpapers_path="$HOME/wallpapers"
+wallpapers_vertical_path="$HOME/wallpapers-vertical"
+
+if [ ! -d "$wallpapers_path" ]; then
+    echo "ERROR: Wallpaper directory not found!"
+    echo "Please create wallpapers directory in $wallpapers_path"
+    exit 1
+fi
+
+if program_installed xrandr; then
+    display_count="$(xrandr | grep ' connected ' | wc -l)"
+    display_order="$(xrandr --listmonitors | tail -n +2 | sed 's/[\+\*]//g' | awk '{ print $2}')"
+    # Build feh command
+    feh_args=("--bg-fill")
+    for i in $(seq 1 "$display_count"); do
+        display_name="$(echo "$display_order" | sed "${i}q;d")"
+        # Get information about the current display, need verbose to always return rotation
+        # and remove 'primary' for consistent column placement
+        display_info="$(xrandr --query --verbose | grep "$display_name" | sed 's/primary //')"
+        # Get the selected resolution for the display
+        resolution="$(echo "$display_info" | awk '{ print $3 }' | sed 's/\+.*//')"
+        # Get the rotation for each display
+        rotation="$(echo "$display_info" | awk '{ print $5 }')"
+        path="$wallpapers_path"
+        resolution_segment=""
+        if [ "$rotation" != "normal" ] && [ "$rotation" != "inverted" ]; then
+            if [ ! -d "$wallpapers_vertical_path" ]; then
+                echo "$rotation"
+                echo "ERROR: Vertical display detected, but vertical wallpapers directory not found!"
+                echo "Please create vertical wallpapers directory in $wallpapers_vertical_path"
+                exit 1
+            fi
+            path="$wallpapers_vertical_path"
+        fi
+        # If we have a resolution-specific path for the display, use it
+        if [ -d "$path/1080p" ]; then
+            resolution_segment="/1080p"
+        fi
+        if [ -d "$path/4k" ]; then
+            if [ "$resolution" = "3840x2160" ] || [ "$resolution" = "2160x3840" ]; then
+                resolution_segment="/4k"
+            fi
+        fi
+        display_wallpaper="$(shuf -en1 "$path$resolution_segment"/*)"
+        feh_args+=("$display_wallpaper")
+    done
+    echo "feh ${feh_args[@]}"
+    feh "${feh_args[@]}"
+else
+    # Default to ~/wallpapers/1080p or ~/wallpapers for first display if no xrandr
+    if [ -d "$path/1080p" ]; then
+        feh --bg-fill "$(shuf -en1 $wallpapers_path/1080p/*)"
+    else
+        feh --bg-fill "$(shuf -en1 $wallpapers_path/*)"
+    fi
+fi

config/VSCodium/User/settings.json

@@ -0,0 +1,59 @@
+{
+	"workbench.colorTheme": "Gruvbox Dark Medium",
+	"vim.camelCaseMotion.enable": true,
+	"vim.easymotion": true,
+	"vim.enableNeovim": true,
+	"vim.handleKeys": {
+		"<C-a>": false,
+		"<C-d>": true,
+		"<C-f>": false,
+		"<C-s>": false,
+		"<C-z>": false
+	},
+	"vim.insertModeKeyBindingsNonRecursive": [
+		{
+			"before": [",", ","],
+			"after": ["<Esc>"]
+		}
+	],
+	"vim.normalModeKeyBindingsNonRecursive": [
+		{
+			"before": ["<leader>", "d"],
+			"after": ["d", "d"]
+		},
+		{
+			"before": ["<leader>", "d"],
+			"after": ["d", "d"]
+		},
+		{
+			"before": [",", ",", "<Esc>"],
+			"commands": [":nohl"]
+		},
+		{
+			"before": ["<leader>", "q"],
+			"commands": [":bp"]
+		},
+		{
+			"before": ["<leader>", "w"],
+			"commands": [":bn"]
+		},
+		{
+			"before": ["<leader>", "r", "r"],
+			"commands": [":action "]
+		},
+		{
+			"before": ["<leader>", "<leader>", "c"],
+			"commands": [":Blose"],
+			"silent": true
+		}
+	],
+	"vim.leader": ",",
+	// To improve performance
+	"extensions.experimental.affinity": {
+		"vscodevim.vim": 1
+	},
+	"vim.neovimUseConfigFile": true,
+	"editor.fontFamily": "'Source Code Pro', regular",
+	"vim.normalModeKeyBindings": [],
+	"python.venvPath": "~/.pyenv"
+}

config/alacritty/alacritty.toml

@@ -1,6 +1,3 @@
-import = [
-    "~/.config/alacritty/themes/themes/gruvbox_dark.toml"
-]
 
 [font]
 size = 9.0
@@ -20,3 +17,30 @@ style = "Italic"
 [font.normal]
 family = "Source Code Pro for Powerline"
 style = "Regular"
+
+[general]
+import = [
+    "~/.config/alacritty/themes/themes/gruvbox_dark.toml"
+]
+
+[selection]
+# X11 always sets PRIMARY (middle-click paste) on text selection; that part
+# needs no config. CLIPBOARD (Ctrl+V / Ctrl+Shift+V) is a separate buffer
+# that nothing populates without this, so mirror every selection into it
+# too. This is handled by Alacritty itself, so it covers anything visible
+# on screen -- local shell, nested tmux, SSH'd remote shells -- regardless
+# of whether the app underneath knows how to talk to the clipboard.
+save_to_clipboard = true
+
+[keyboard]
+# Alacritty doesn't implement the CSI-u/Kitty keyboard protocol that lets a
+# terminal report Shift+Enter as distinct from plain Enter, so it needs an
+# explicit binding. Sending a raw line feed makes Shift+Enter equivalent to
+# Ctrl+J, which Claude Code (and most other terminal apps) already treats
+# as "insert newline" with zero further configuration -- this works
+# unchanged through any depth of nested tmux, since it's just a literal
+# byte rather than an escape sequence that needs to be interpreted along
+# the way.
+bindings = [
+    { key = "Return", mods = "Shift", chars = "\n" },
+]

config/applications/USDB-syncer.desktop

@@ -0,0 +1,7 @@
+[Desktop Entry]
+Name=USDB Syncer
+Comment=Download karaoke songs
+Exec=usdb_syncer
+Terminal=false
+Type=Application
+Categories=Software;

config/bare-i3/i3-autostart.conf

@@ -21,6 +21,13 @@ exec --no-startup-id dex --autostart --environment i3
 # applications #
 ################
 
+# set wallpaper
+exec --no-startup-id sleep 1 && ~/dotfiles/bin/update-wallpaper
+# exec --no-startup-id sleep 1 && systemctl start update-wallpaper.service
+
+# start keyring
+exec --no-startup-id dbus-update-activation-environment --all
+
 #exec_always --no-startup-id conky -c ~/.config/conky/conkyrc-stats
 
 #exec --no-startup-id sleep 7 && firefox https://todo.bradina.haus/

config/bare-i3/i3-bar.conf

@@ -10,6 +10,8 @@ bar {
     font pango: Source Code Pro for Powerline 10
     status_command i3blocks -c ~/.config/i3/i3blocks.conf
     position bottom
+    output DP-0
+    output DP-2
     #tray_padding 0
 
     # When strip_workspace_numbers is set to yes,
@@ -37,21 +39,32 @@ bar {
 # https://gist.github.com/lopspower/03fb1cc0ac9f32ef38f4
 # #08052be6 --> e6=90%
 
-# bar {
-#	font pango: Noto Sans Regular 10
-#	status_command i3blocks -c ~/.config/i3/i3blocks-2.conf
-#	i3bar_command i3bar --transparency
-#	output HDMI-0
-#	position bottom
-#
-#	colors {
-#		separator          $purple
-#		background         $darkbluetrans
-#        	statusline         $white
-#					border		bg		txt		indicator
-#		focused_workspace	$lighterblue	$lighterblue	$darkblue	$purple
-#		active_workspace	$lightdblue	$lightdblue	$darkblue	$purple
-#		inactive_workspace	$darkblue	$darkblue	$lightdblue	$purple
-#		urgent_workspace	$urgentred	$urgentred	$white		$purple
-#	}
-#}
+bar {
+	font pango: Noto Sans Regular 10
+	status_command i3blocks -c ~/.config/i3/i3blocks-2.conf
+	i3bar_command i3bar --transparency
+	output HDMI-0
+	position bottom
+
+    colors {
+        # gruvbox colors
+        background          $bg
+        statusline          $yellow
+        # workspaces section            
+        #                    border     bg          txt
+        focused_workspace    $aqua      $aqua       $darkgray
+        inactive_workspace   $darkgray  $darkgray   $yellow
+        active_workspace     $darkgray  $darkgray   $yellow
+        urgent_workspace     $red       $red        $bg
+	}
+	# colors {
+	# 	separator          $purple
+	# 	background         $darkbluetrans
+	#       	statusline         $white
+	# 				border		bg		txt		indicator
+	# 	focused_workspace	$lighterblue	$lighterblue	$darkblue	$purple
+	# 	active_workspace	$lightdblue	$lightdblue	$darkblue	$purple
+	# 	inactive_workspace	$darkblue	$darkblue	$lightdblue	$purple
+	# 	urgent_workspace	$urgentred	$urgentred	$white		$purple
+	# }
+}

config/bash_aliases

@@ -0,0 +1 @@
+alias vim=nvim

config/bash_functions

@@ -0,0 +1,142 @@
+function program_installed {
+    local return_=0
+
+    type $1 >/dev/null 2>&1 || { local return_=1; }
+
+    return "$return_"
+}
+
+function list_processes() {
+    # List all processes matching the given process name string
+    ps aux | grep $(whoami) | grep -i "$1" | grep -v grep
+}
+
+function kill_all() {
+    # Kill all processes matching the given process name string
+    if [ ! "$1" ]; then
+        echo "kill_all requires a process name to kill all instances of"
+        return 1
+    fi
+    kill_flag=15
+    if [ "$15" ]; then
+        kill_flag="$15"
+    fi
+
+    count=$(list_processes "$1" | wc -l)
+
+    echo "Killing $count running processes matching $1"
+    kill -"$kill_flag" $(list_processes "$1" | awk '{print $2}')
+    
+    count=$(list_processes "$1" | wc -l)
+    if [ $count -gt 0 ]; then
+        echo "$count processes could not be killed"
+    fi
+}
+
+function ranger-cd() {
+    # Make shell cd to ranger directory
+    tempfile=$(mktemp)
+    ranger --choosedir="$tempfile" "${@:-$(pwd)}" < $TTY
+    test -f "$tempfile" &&
+    if [ "$(cat -- "$tempfile")" != "$(echo -n `pwd`)" ]; then
+        cd $(cat $tempfile)
+    fi
+    zle reset-prompt
+    printf '\n'
+    rm -f -- "$tempfile"
+}
+
+function terminal-clock() {
+    tty-clock -tcb < $TTY
+    zle reset-prompt
+    printf '\n'
+}
+
+function check_dotfiles_version {
+    # Check if the version of the dotfiles directory is the latest version
+    # Return 0 if repo is present and the latest version
+    # Return 1 if the repo is not present
+    # Return 2 if the repo is behind the remote
+    # Return 3 if the repo is ahead of the remote
+    # Return 4 if the repo has diverged from the remote
+    # Return 5 if DOTFILES_DIR is not set
+    if [ -z $DOTFILES_DIR ]; then
+        return 5
+    fi
+
+    if [ ! -d $DOTFILES_DIR ]; then
+        return 2
+    fi
+
+    pushd $DOTFILES_DIR > /dev/null
+
+    # TODO: This may be gitbox
+    git fetch origin > /dev/null
+    UPSTREAM=${1:-'@{u}'}
+    LOCAL=$(git rev-parse @)
+    REMOTE=$(git rev-parse "$UPSTREAM")
+    BASE=$(git merge-base @ "$UPSTREAM")
+
+    popd > /dev/null
+
+    if [[ $LOCAL = $REMOTE ]]; then
+        return 0
+    elif [[ $LOCAL = $BASE ]]; then
+        return 2
+    elif [[ $REMOTE = $BASE ]]; then
+        return 3
+    else
+        return 4
+    fi
+}
+
+function python_roots {
+    if [ -d $HOME/.local/lib/ ]; then
+        for directory in $(echo $HOME/.local/lib/python*); do
+            echo "$directory"
+        done
+    fi
+    if [ -d $HOME/.local/share/pipx/venvs/powerline-status/lib/ ]; then
+        for directory in $(echo $HOME/.local/share/pipx/venvs/powerline-status/lib/python*); do
+            echo "$directory"
+        done
+    fi
+    if [ -d $HOME/.local/pipx/venvs/powerline-status/lib/ ]; then
+        for directory in $(echo $HOME/.local/pipx/venvs/powerline-status/lib/python*); do
+            echo "$directory"
+        done
+    fi
+    if [ -d /usr/lib/ ]; then
+        for directory in $(echo /usr/lib/python*); do
+            echo "$directory"
+        done
+    fi
+    if [ -d /usr/local/lib/ ]; then
+        # TODO: Make this not print warnings when the directory doesn't exit
+        for directory in $(echo /usr/local/lib/python*); do
+            echo "$directory"
+        done
+    fi
+}
+
+function powerline_bash_sources {
+    # To support bash 3.2 on macOS, can't use declare -ag so workaround with capturing output
+    PYTHON_ROOTS=( $(python_roots) )
+    # Powerline plugin from distribution agnostic install directory
+    ## Assemble list of possible sources
+    if [[ -a $POWERLINE_ROOT/bindings/bash/powerline.sh ]]; then
+        # Prefer user-set powerline directory
+        echo "$POWERLINE_ROOT/bindings/bash/powerline.sh"
+    fi
+    if [ -d /usr/share/powerline ]; then
+        # Apt installs here
+        echo "/usr/share/powerline/bindings/bash/powerline.sh"
+    fi
+    # If $POWERLINE_ROOT not set or set incorrectly, try default locations
+    for directory in "${PYTHON_ROOTS[@]}"; do
+        if [ -d "$directory" ]; then
+            echo "$directory"/site-packages/powerline/bindings/bash/powerline.sh
+            echo "$directory"/dist-packages/powerline/bindings/bash/powerline.sh
+        fi
+    done
+}

config/bash_profile

@@ -0,0 +1,6 @@
+if [ -n "$BASH_VERSION" ]; then
+    # include .bashrc if it exists
+    if [ -f "$HOME/.bashrc" ]; then
+        . "$HOME/.bashrc"
+    fi
+fi

config/bashrc

@@ -0,0 +1,84 @@
+#PATHs
+if [ -d "$HOME/.local/bin" ]; then
+    export PATH="$HOME/.local/bin:$PATH"
+fi
+
+if [ -f "$HOME/.bash_functions" ]; then
+    source "$HOME/.bash_functions"
+fi
+
+# User profiles
+source $HOME/.profile
+# Define $POWERLINE_ROOT
+if [ -f $HOME/.profile.local ]; then
+    set -a
+    source $HOME/.profile.local
+    set +a
+fi
+
+if [ -n "$DOTFILES_DIR" ] && [ -d "$DOTFILES_DIR" ]; then
+    # Gruvbox colors
+    [[ -f "$DOTFILES_DIR/dependencies/gruvbox/gruvbox_256palette.sh" ]] && source "$DOTFILES_DIR/dependencies/gruvbox/gruvbox_256palette.sh"
+fi
+
+# Italic support
+if [ -f $HOME/.xterm-256color-italic.terminfo ]; then
+    tic $HOME/.xterm-256color-italic.terminfo
+fi
+if [ -f $HOME/.screen-256color-italic.terminfo ]; then
+    tic $HOME/.screen-256color-italic.terminfo
+fi
+
+# Use neovim where available
+if program_installed neovim; then
+    alias vim='nvim'
+fi
+
+# fzf fuzzy finder
+if program_installed fzf; then
+    # TODO: This is broken when fzf is old, should include a local copy
+    eval "$(fzf --bash)"
+fi
+
+# thefuck command correction
+if program_installed fuck; then
+    eval "$(thefuck --alias)"
+fi
+
+# aactivator
+if program_installed aactivator; then
+    eval "$(aactivator init)"
+fi
+
+# Preferred editor for local and remote sessions
+export EDITOR='vim'
+
+# Powerline
+if program_installed powerline; then
+    if [ -n "$POWERLINE_ROOT" ] && \
+        [ -f "$POWERLINE_ROOT" ] && \
+        [ -f "$POWERLINE_ROOT/bindings/bash/powerline.sh" ]; then
+        # Skip lookup if location is known
+        source "$POWERLINE_ROOT/bindings/bash/powerline.sh"
+    else
+        POWERLINE_BASH_SOURCES=( $(powerline_bash_sources) )
+        found=0
+        for file in "${POWERLINE_BASH_SOURCES[@]}"; do
+            if [[ -a $file ]]; then
+                # TODO: Store the POWERLINE_ROOT in .profile.local if found
+                source $file
+                found=1
+                break
+            fi
+        done
+        if [ $found -eq 0 ]; then
+            echo "Powerline binding not found."
+            echo "Please set \$POWERLINE_ROOT in .profile.local"
+        fi
+    fi
+fi
+
+# Local overrides
+if [ -f $HOME/.bashrc_local ]; then
+    source $HOME/.bashrc_local
+fi

config/claude/CLAUDE.md

@@ -0,0 +1,39 @@
+# Global preferences
+
+## Development Guidelines
+
+- ALWAYS implement minimal changes to accomplish your task, nothing unecessary
+- NEVER introduce unecessary complexity or side-effects on other code
+- NEVER write unecessary comments, only minimal comments to describe functionality which isn't obvious from reading the code
+- ALWAYS respect the existing style of the repository
+- ALWAYS implement the best possible solution to a problem you can find
+- NEVER reinvent the wheel. if there's an established, accepted way to do something which doesn't introduce unecessary complexity, use it
+- NEVER include co-authorship lines in a git commit
+- NEVER commit to a git repository except when bootstrapping your own fresh repositories
+
+
+## Spec documents
+
+When a skill or workflow (e.g. brainstorming) would write a design spec/plan document
+to a project-local path like `docs/superpowers/specs/`, write it to `~/specs/` instead,
+using the same `YYYY-MM-DD-<topic>-design.md` naming convention. Do not commit spec
+documents into project git repositories unless explicitly asked to.
+
+## Gitea PR review workflow
+
+For repos whose `origin` remote is on `gitbox.bradina.localdomain`: when the
+finishing-a-development-branch skill's "Push and create PR" option is chosen,
+after pushing, also run `gitea-pr create` (from dotfiles `bin/`) to actually
+open the PR, and report the printed URL back. Always pass `--title`/`--body`
+with a real summary of the changes, the reasoning behind them, and what was
+tested — never placeholder or throwaway text, even for a call made mainly to
+test other behavior (e.g. testing that a duplicate-PR check short-circuits):
+if it turns out to actually create a PR, that text ships as the PR
+description.
+
+When asked to check or address PR feedback, run `gitea-pr comments <PR#>`,
+make the requested changes, commit, push, and report back. Repeat for as many
+rounds as needed. Only check feedback when explicitly asked — do not poll
+proactively.
+
+Never run `gitea-pr merge` unless explicitly instructed to merge in that turn.

config/claude/hooks/deny-dangerous-bash.sh

@@ -0,0 +1,30 @@
+#!/usr/bin/env bash
+# PreToolUse hook: block obviously destructive Bash commands regardless of permission mode.
+# Exit 2 blocks the tool call and returns stderr to Claude as feedback.
+
+command=$(jq -r '.tool_input.command // empty')
+
+deny_patterns=(
+    'rm[[:space:]]+(-[a-zA-Z]*[rR][a-zA-Z]*f|-[a-zA-Z]*f[a-zA-Z]*[rR])[[:space:]]+/($|[[:space:]])'
+    'rm[[:space:]]+(-[a-zA-Z]*[rR][a-zA-Z]*f|-[a-zA-Z]*f[a-zA-Z]*[rR])[[:space:]]+(--no-preserve-root|~($|/)|\*)'
+    ':\(\)[[:space:]]*\{[[:space:]]*:.*\|.*:.*&.*\}[[:space:]]*;[[:space:]]*:'
+    'dd[[:space:]].*of=/dev/(sd|nvme|vd|hd)'
+    'mkfs(\.[a-zA-Z0-9]+)?[[:space:]]'
+    '>[[:space:]]*/dev/(sd|nvme|vd|hd)[a-z0-9]*($|[[:space:]])'
+    'chmod[[:space:]]+-R[[:space:]]+[0-7]{3,4}[[:space:]]+/($|[[:space:]])'
+    'chown[[:space:]]+-R[[:space:]].*[[:space:]]+/($|[[:space:]])'
+    '(^|[[:space:]])(shutdown|reboot|poweroff|halt)([[:space:]]|$)'
+    'wipefs[[:space:]]'
+    'shred[[:space:]].*/dev/'
+    'curl[[:space:]].*\|[[:space:]]*(sudo[[:space:]]+)?(sh|bash|zsh)($|[[:space:]])'
+    'wget[[:space:]].*-O-.*\|[[:space:]]*(sudo[[:space:]]+)?(sh|bash|zsh)($|[[:space:]])'
+)
+
+for pattern in "${deny_patterns[@]}"; do
+    if [[ "$command" =~ $pattern ]]; then
+        echo "Blocked by local denylist hook (~/.claude/hooks/deny-dangerous-bash.sh): command matches pattern '$pattern'" >&2
+        exit 2
+    fi
+done
+
+exit 0

config/claude/statusline.sh

@@ -0,0 +1,57 @@
+#!/usr/bin/env bash
+# Claude Code statusLine command: model, dir/branch, context usage, rate limits.
+# See: https://code.claude.com/docs/en/statusline
+
+input=$(cat)
+
+MODEL=$(echo "$input" | jq -r '.model.display_name')
+DIR=$(echo "$input" | jq -r '.workspace.current_dir')
+PCT=$(echo "$input" | jq -r '.context_window.used_percentage // 0' | cut -d. -f1)
+FIVE_H=$(echo "$input" | jq -r '.rate_limits.five_hour.used_percentage // empty')
+WEEK=$(echo "$input" | jq -r '.rate_limits.seven_day.used_percentage // empty')
+
+# Claude Code omits rate_limits when ANTHROPIC_BASE_URL isn't the literal
+# api.anthropic.com host (e.g. the dejima sandbox's credential-injecting
+# loopback proxy), even though the usage endpoint itself works fine through
+# it. Fetch it ourselves in that case, cached briefly to avoid a network
+# round-trip on every render.
+if [ -z "$FIVE_H" ] && [ -n "${ANTHROPIC_BASE_URL:-}" ] && [ -n "${ANTHROPIC_AUTH_TOKEN:-}" ]; then
+    CACHE="${TMPDIR:-/tmp}/claude-statusline-usage-${UID}.json"
+    if [ ! -s "$CACHE" ] || [ -n "$(find "$CACHE" -mmin +1 2>/dev/null)" ]; then
+        if curl -fsS --max-time 3 "$ANTHROPIC_BASE_URL/api/oauth/usage" \
+                -H "Authorization: Bearer $ANTHROPIC_AUTH_TOKEN" \
+                -H "anthropic-beta: oauth-2025-04-20" \
+                -o "$CACHE.tmp" 2>/dev/null; then
+            mv "$CACHE.tmp" "$CACHE"
+        fi
+    fi
+    FIVE_H=$(jq -r '.five_hour.utilization // empty' "$CACHE" 2>/dev/null)
+    WEEK=$(jq -r '.seven_day.utilization // empty' "$CACHE" 2>/dev/null)
+fi
+
+GREEN='\033[32m'; YELLOW='\033[33m'; RED='\033[31m'; RESET='\033[0m'
+
+if [ "$PCT" -ge 90 ]; then BAR_COLOR="$RED"
+elif [ "$PCT" -ge 70 ]; then BAR_COLOR="$YELLOW"
+else BAR_COLOR="$GREEN"; fi
+
+BAR_WIDTH=10
+FILLED=$((PCT * BAR_WIDTH / 100))
+EMPTY=$((BAR_WIDTH - FILLED))
+BAR=""
+[ "$FILLED" -gt 0 ] && printf -v FILL "%${FILLED}s" && BAR="${FILL// /▓}"
+[ "$EMPTY" -gt 0 ] && printf -v PAD "%${EMPTY}s" && BAR="${BAR}${PAD// /░}"
+
+BRANCH=""
+git -C "$DIR" rev-parse --git-dir > /dev/null 2>&1 && BRANCH=" | 🌿 $(git -C "$DIR" branch --show-current 2>/dev/null)"
+
+LIMITS=""
+[ -n "$FIVE_H" ] && LIMITS="5h: $(printf '%.0f' "$FIVE_H")%"
+[ -n "$WEEK" ] && LIMITS="${LIMITS:+$LIMITS }7d: $(printf '%.0f' "$WEEK")%"
+
+echo -e "[$MODEL] 📁 ${DIR##*/}${BRANCH}"
+if [ -n "$LIMITS" ]; then
+    echo -e "${BAR_COLOR}${BAR}${RESET} ${PCT}% | ${LIMITS}"
+else
+    echo -e "${BAR_COLOR}${BAR}${RESET} ${PCT}%"
+fi

config/claude/themes/gruvbox.json

@@ -0,0 +1,30 @@
+{
+  "name": "Gruvbox Dark",
+  "base": "dark",
+  "overrides": {
+    "claude": "#d3869b",
+    "text": "#ebdbb2",
+    "inactive": "#665c54",
+    "subtle": "#7c6f64",
+    "muted": "#928374",
+    "success": "#b8bb26",
+    "error": "#fb4934",
+    "warning": "#fabd2f",
+    "link": "#83a598",
+    "highlight": "#fabd2f",
+    "selection": "#504945",
+    "diffAdded": "#b8bb26",
+    "diffRemoved": "#fb4934",
+    "promptBorder": "#504945",
+    "bashBorder": "#504945",
+    "mcpBorder": "#504945",
+    "planMode": "#83a598",
+    "spinner": "#d3869b",
+    "header": "#8ec07c",
+    "separator": "#3c3836",
+    "badge": "#fe8019",
+    "permission": "#fe8019",
+    "suggestion": "#8ec07c",
+    "fastMode": "#fabd2f"
+  }
+}

config/gtk-3.0/colors.css

@@ -0,0 +1,84 @@
+@define-color borders_breeze #4c4e51;
+@define-color content_view_bg_breeze #141618;
+@define-color error_color_backdrop_breeze #da4453;
+@define-color error_color_breeze #da4453;
+@define-color error_color_insensitive_backdrop_breeze #55242b;
+@define-color error_color_insensitive_breeze #55242b;
+@define-color insensitive_base_color_breeze #131517;
+@define-color insensitive_base_fg_color_breeze #606263;
+@define-color insensitive_bg_color_breeze #1f2124;
+@define-color insensitive_borders_breeze #2d3033;
+@define-color insensitive_fg_color_breeze #686a6c;
+@define-color insensitive_selected_bg_color_breeze #1f2124;
+@define-color insensitive_selected_fg_color_breeze #686a6c;
+@define-color insensitive_unfocused_bg_color_breeze #1f2124;
+@define-color insensitive_unfocused_fg_color_breeze #686a6c;
+@define-color insensitive_unfocused_selected_bg_color_breeze #1f2124;
+@define-color insensitive_unfocused_selected_fg_color_breeze #686a6c;
+@define-color link_color_breeze #926ee4;
+@define-color link_visited_color_breeze #9b59b6;
+@define-color success_color_backdrop_breeze #27ae60;
+@define-color success_color_breeze #27ae60;
+@define-color success_color_insensitive_backdrop_breeze #19482f;
+@define-color success_color_insensitive_breeze #19482f;
+@define-color theme_base_color_breeze #141618;
+@define-color theme_bg_color_breeze #202326;
+@define-color theme_button_background_backdrop_breeze #292c30;
+@define-color theme_button_background_backdrop_insensitive_breeze #272a2e;
+@define-color theme_button_background_insensitive_breeze #272a2e;
+@define-color theme_button_background_normal_breeze #292c30;
+@define-color theme_button_decoration_focus_backdrop_breeze #926ee4;
+@define-color theme_button_decoration_focus_backdrop_insensitive_breeze #4a406a;
+@define-color theme_button_decoration_focus_breeze #926ee4;
+@define-color theme_button_decoration_focus_insensitive_breeze #4a406a;
+@define-color theme_button_decoration_hover_backdrop_breeze #926ee4;
+@define-color theme_button_decoration_hover_backdrop_insensitive_breeze #4a406a;
+@define-color theme_button_decoration_hover_breeze #926ee4;
+@define-color theme_button_decoration_hover_insensitive_breeze #4a406a;
+@define-color theme_button_foreground_active_backdrop_breeze #fcfcfc;
+@define-color theme_button_foreground_active_backdrop_insensitive_breeze #686a6c;
+@define-color theme_button_foreground_active_breeze #ffffff;
+@define-color theme_button_foreground_active_insensitive_breeze #686a6c;
+@define-color theme_button_foreground_backdrop_breeze #fcfcfc;
+@define-color theme_button_foreground_backdrop_insensitive_breeze #6d6f72;
+@define-color theme_button_foreground_insensitive_breeze #6d6f72;
+@define-color theme_button_foreground_normal_breeze #fcfcfc;
+@define-color theme_fg_color_breeze #fcfcfc;
+@define-color theme_header_background_backdrop_breeze #202326;
+@define-color theme_header_background_breeze #292c30;
+@define-color theme_header_background_light_breeze #202326;
+@define-color theme_header_foreground_backdrop_breeze #fcfcfc;
+@define-color theme_header_foreground_breeze #fcfcfc;
+@define-color theme_header_foreground_insensitive_backdrop_breeze #fcfcfc;
+@define-color theme_header_foreground_insensitive_breeze #fcfcfc;
+@define-color theme_hovering_selected_bg_color_breeze #926ee4;
+@define-color theme_selected_bg_color_breeze #6c53a6;
+@define-color theme_selected_fg_color_breeze #ffffff;
+@define-color theme_text_color_breeze #fcfcfc;
+@define-color theme_titlebar_background_backdrop_breeze #202326;
+@define-color theme_titlebar_background_breeze #292c30;
+@define-color theme_titlebar_background_light_breeze #202326;
+@define-color theme_titlebar_foreground_backdrop_breeze #fcfcfc;
+@define-color theme_titlebar_foreground_breeze #fcfcfc;
+@define-color theme_titlebar_foreground_insensitive_backdrop_breeze #fcfcfc;
+@define-color theme_titlebar_foreground_insensitive_breeze #fcfcfc;
+@define-color theme_unfocused_base_color_breeze #141618;
+@define-color theme_unfocused_bg_color_breeze #202326;
+@define-color theme_unfocused_fg_color_breeze #fcfcfc;
+@define-color theme_unfocused_selected_bg_color_alt_breeze #362c50;
+@define-color theme_unfocused_selected_bg_color_breeze #362c50;
+@define-color theme_unfocused_selected_fg_color_breeze #fcfcfc;
+@define-color theme_unfocused_text_color_breeze #fcfcfc;
+@define-color theme_unfocused_view_bg_color_breeze #131517;
+@define-color theme_unfocused_view_text_color_breeze #606263;
+@define-color theme_view_active_decoration_color_breeze #926ee4;
+@define-color theme_view_hover_decoration_color_breeze #926ee4;
+@define-color tooltip_background_breeze #292c30;
+@define-color tooltip_border_breeze #535659;
+@define-color tooltip_text_breeze #fcfcfc;
+@define-color unfocused_borders_breeze #4c4e51;
+@define-color unfocused_insensitive_borders_breeze #2d3033;
+@define-color warning_color_backdrop_breeze #f67400;
+@define-color warning_color_breeze #f67400;
+@define-color warning_color_insensitive_backdrop_breeze #5e340f;
+@define-color warning_color_insensitive_breeze #5e340f;

config/gtk-3.0/gtk.css

@@ -1,3 +1,4 @@
 VteTerminal, vte-terminal {
     padding: 13px;
 }
+@import 'colors.css';

config/gtk-3.0/settings.ini

@@ -1,16 +1,25 @@
 [Settings]
-gtk-font-name=Liberation Sans Regular 10
-gtk-theme-name=Gruvbox-Dark-BL
-gtk-icon-theme-name=Gruvbox_Dark
-gtk-cursor-theme-name=Gruvbox-cursors
-gtk-cursor-theme-size=16
-gtk-toolbar-style=GTK_TOOLBAR_BOTH_HORIZ
-gtk-toolbar-icon-size=GTK_ICON_SIZE_LARGE_TOOLBAR
-gtk-button-images=1
-gtk-menu-images=1
+gtk-application-prefer-dark-theme=true
+gtk-button-images=true
+gtk-cursor-blink=true
+gtk-cursor-blink-time=1000
+gtk-cursor-theme-name=breeze_cursors
+gtk-cursor-theme-size=24
+gtk-decoration-layout=icon:minimize,maximize,close
+gtk-enable-animations=true
 gtk-enable-event-sounds=0
 gtk-enable-input-feedback-sounds=0
+gtk-font-name=Noto Sans,  10
+gtk-icon-theme-name=breeze-dark
+gtk-menu-images=true
+gtk-modules=colorreload-gtk-module
+gtk-primary-button-warps-slider=true
+gtk-sound-theme-name=ocean
+gtk-theme-name=Gruvbox-Dark-BL
+gtk-toolbar-icon-size=GTK_ICON_SIZE_LARGE_TOOLBAR
+gtk-toolbar-style=3
 gtk-xft-antialias=1
+gtk-xft-dpi=122880
 gtk-xft-hinting=1
 gtk-xft-hintstyle=hintmedium
 gtk-xft-rgba=none

config/i3/config

@@ -22,6 +22,15 @@ set $ws7 "7"
 set $ws8 "8"
 set $ws9 "9"
 set $ws10 "10"
+set $ws11 "11"
+set $ws12 "12"
+set $ws13 "13"
+set $ws14 "14"
+set $ws15 "15"
+set $ws16 "16"
+set $ws17 "17"
+set $ws18 "18"
+set $ws19 "19"
 
 # Define colors variables:
 # gruvbox colors

config/i3/config.d/autostart.conf

@@ -12,20 +12,19 @@ exec --no-startup-id numlockx on
 # use arandr to setup displays and save the file as default:
 exec --no-startup-id ~/.screenlayout/default.sh
 
-# set wallpaper
-exec --no-startup-id sleep 1 && feh --bg-fill --randomize ~/wallpapers
-
 # set powersavings for display if not handled by DE:
 # Usage: xset dpms {standby_time} {suspend_time} {off_time}
-# exec --no-startup-id xset dpms 600 0 0
+#exec --no-startup-id xset dpms 600 0 0
 
 # disable power saving (for example if using xscreensaver)
-#exec --no-startup-id xset -dpms
+exec --no-startup-id xset -dpms
 
 # use xautolock to use autosuspend rules for mobile devices
 # https://wiki.archlinux.org/title/Session_lock#xautolock
 #exec --no-startup-id xautolock -time 60 -locker "systemctl suspend"
 
+# set wallpaper(s) on i3 start/restart
+exec_always --no-startup-id "[ -f ~/.dotfiles-config ] && source ~/.dotfiles-config && $DOTFILES_DIR/bin/update-wallpaper"
 
 # xscreensaver
 # https://www.jwz.org/xscreensaver
@@ -45,15 +44,17 @@ exec --no-startup-id /usr/bin/dunst
 # Scratchpad with notes
 # `tmuxinator open notes` first for this to work
 exec --no-startup-id alacritty --title notebook -e zsh -c 'tmuxinator start notes'
-for_window [class="^Alacritty$" title="notebook"] move scratchpad, scratchpad hide
+for_window [class="^Alacritty$" title="notebook"] move scratchpad
+#, scratchpad hide
 
 # Performance monitor
 exec --no-startup-id alacritty --title monitoring -e zsh -c 'htop'
-for_window [class="^Alacritty$" title="monitoring"] move scratchpad, scratchpad hide
+for_window [class="^Alacritty$" title="monitoring"] move scratchpad
+#, scratchpad hide
 
 # Remote connections
-exec --no-startup-id alacritty --title servers -e zsh -c 'tmuxinator start servers'
-for_window [class="^Alacritty$" title="servers"] move scratchpad, scratchpad hide
+# exec --no-startup-id alacritty --title servers -e zsh -c 'tmuxinator start servers'
+# for_window [class="^Alacritty$" title="servers"] move scratchpad, scratchpad hide
 
 ###############
 # system tray #

config/i3/config.d/keybindings.conf

@@ -7,10 +7,15 @@ floating_modifier $mod
 # switch/iterate between workspaces
 bindsym $mod+Tab workspace next
 bindsym $mod+Shift+Tab workspace prev
+bindsym $mod+c exec --no-startup-id ~/.config/i3/scripts/empty_workspace
+bindsym $mod+Shift+c exec --no-startup-id ~/.config/i3/scripts/move_container_empty_workspace
 
 bindsym $mod+slash [class="^Alacritty$" title="notebook"] scratchpad show
+# bindsym $mod+slash scratchpad show
 bindsym $mod+m [class="^Alacritty$" title="monitoring"] scratchpad show
-bindsym $mod+Shift+colon [class="^Alacritty$" title="servers"] scratchpad show
+# bindsym $mod+Shift+colon [class="^Alacritty$" title="servers"] scratchpad show
+bindsym $mod+Shift+slash move scratchpad
+bindsym $mod+Control+slash scratchpad show
 
 # switch to workspace
 bindsym $mod+1    workspace  $ws1
@@ -162,7 +167,8 @@ mode "$mode_gaps_outer" {
 ######################################
 
 # start a terminal
-bindsym $mod+Return exec --no-startup-id alacritty
+bindsym $mod+Return exec --no-startup-id alacritty -e sh -c "tmux new-session"
+# bindsym $mod+Return exec --no-startup-id alacritty
 
 # kill focused window
 bindsym $mod+q kill
@@ -171,7 +177,7 @@ bindsym $mod+q kill
 #bindsym --release button2 kill
 
 # reload the configuration file
-bindsym $mod+Shift+c reload
+bindsym $mod+Control+r reload
 
 # restart i3 inplace (preserves your layout/session, can be used to update i3)
 bindsym $mod+Shift+r restart
@@ -206,7 +212,19 @@ bindsym $mod+Shift+Down move down
 bindsym $mod+Shift+Up move up
 bindsym $mod+Shift+Right move right
 
-# splij in vertical orientation
+# move focused workspace
+bindsym $mod+Control+h move workspace to output left
+bindsym $mod+Control+j move workspace to output down
+bindsym $mod+Control+k move workspace to output up
+bindsym $mod+Control+l move workspace to output right
+
+# alternatively, you can use the cursor keys:
+bindsym $mod+Control+Left move workspace to output left
+bindsym $mod+Control+Down move workspace to output down
+bindsym $mod+Control+Up move workspace to output up
+bindsym $mod+Control+Right move workspace to output right
+
+# split in vertical orientation
 bindsym $mod+minus split v
 bindsym $mod+KP_Subtract split v
 
@@ -254,6 +272,7 @@ bindsym $mod+p exec --no-startup-id /usr/local/bin/switch-audio-port
 ## App shortcuts
 bindsym $mod+w exec /usr/bin/firefox
 bindsym Print exec scrot ~/Pictures/Screenshots/%Y-%m-%d-%T-screenshot.png && notify-send "Screenshot saved to ~/Pictures/Screenshots/$(date +"%Y-%m-%d-%T")-screenshot.png"
+#bindsym Print exec spectactle --output ~/Pictures/Screenshots/%Y-%m-%d-%T-screenshot.png
 
 # Power Profiles menu switcher (rofi)
 bindsym $mod+Shift+p exec --no-startup-id ~/.config/i3/scripts/power-profiles
@@ -272,5 +291,12 @@ bindsym $mod+t exec --no-startup-id rofi -show window \
 
 ## rofi bindings to manage clipboard (install rofi-greenclip from the AUR)
 exec --no-startup-id greenclip daemon>/dev/null
-bindsym $mod+c exec --no-startup-id rofi -modi "clipboard:greenclip print" -show clipboard \
+bindsym $mod+b exec --no-startup-id rofi -modi "clipboard:greenclip print" -show clipboard \
 		-config ~/.config/rofi/rofidmenu.rasi
+
+## autoclicker x 100
+bindsym $mod+Shift+o exec --no-startup-id xdotool click --repeat 1000 --delay 10 1
+bindsym $mod+Shift+i exec --no-startup-id xdotool click --repeat 10000 --delay 10 1
+
+# calculator
+bindsym XF86Calculator exec --no-startup-id galculator

config/i3/config.d/theme.conf

@@ -9,7 +9,6 @@ default_border pixel 5
 
 # thin borders
 hide_edge_borders smart
-smart_borders on
 
 # Set inner/outer gaps
 gaps inner 10

config/i3/config.d/workspace.conf

@@ -13,18 +13,3 @@ workspace_layout default
 # Each new window will open fullscreen as a tab (left to right)
 #workspace_layout tabbed
 
-##########################################
-# configuration for workspace behaviour: #
-##########################################
-
-# use workspaces on different displays:
-# where you have to replace VGA-0/HDMI-0 with the names for your displays
-# you can get from xrandr command
-#workspace $ws1 output DP-2
-#workspace $ws3 output DP-2
-#workspace $ws5 output DP-2
-#workspace $ws2 output DP-4
-#workspace $ws4 output DP-4
-#workspace $ws6 output DP-4
-
-exec i3-msg workspace 2

config/i3/config.de/i3-bar.conf

@@ -1 +0,0 @@
-/home/brad/dotfiles/config/plasma-i3/i3-bar.conf

config/i3/config.de/i3-keybindings.conf

@@ -1 +0,0 @@
-/home/brad/dotfiles/config/plasma-i3/i3-keybindings.conf

config/i3/i3blocks-2.conf

@@ -0,0 +1,102 @@
+# i3blocks config file changed for EndeavourOS-i3 setup
+
+# source is available here:
+# https://raw.githubusercontent.com/endeavouros-team/endeavouros-i3wm-setup/main/.config/i3/i3blocks.conf
+# Maintainer: joekamprad [joekamprad //a_t// endeavouros.com]
+# Former Visual Designer: Florent Valetti [@FLVAL EndeavourOS]
+# created for i3wm setup on EndeavourOS
+# https://endeavouros.com
+
+# cheatsheet for icon fonts used on the block-bar:
+# https://fontawesome.com/v4.7/cheatsheet/
+
+# --> to update this run the following command:
+# wget --backups=1 https://raw.githubusercontent.com/endeavouros-team/endeavouros-i3wm-setup/main/.config/i3/i3blocks.conf -P ~/.config/i3/
+
+# Please see man i3blocks for a complete reference!
+# The man page is also hosted at http://vivien.github.io/i3blocks
+
+
+# List of valid properties:
+#
+# align
+# color
+# command
+# full_text
+# instance
+# interval
+# label
+# min_width
+# name
+# separator
+# separator_block_width
+# short_text
+# signal
+# urgent
+
+# Global properties
+#
+# The top properties below are applied to every block, but can be overridden.
+separator=false
+markup=pango
+separator_block_width=15
+
+#[Weather]
+#command=~/.config/i3/scripts/openweather
+# or:
+#command=~/.config/i3/scripts/openweather-city
+#interval=1800
+#color=#7275b3
+
+separator_block_width=10
+[spacer]
+separator_block_width=10
+full_text=
+color=#b16286
+
+[pavucontrol]
+separator_block_width=10
+full_text=
+command=pavucontrol
+color=#689d6a
+
+[volume-pulseaudio]
+command=~/.config/i3/scripts/volume
+instance=Master
+color=#689d6a
+interval=1
+
+separator_block_width=10
+[spacer]
+separator_block_width=10
+full_text=
+color=#b16286
+
+[time]
+label= 
+command=date '+%a %b %d %I:%M:%S %p'
+color=#98971a
+interval=1
+
+separator_block_width=10
+[spacer]
+separator_block_width=10
+full_text=
+color=#b16286
+
+[keybindings]
+full_text=
+command=~/.config/i3/scripts/keyhint
+
+[sleep_screen]
+full_text=🖵
+command=~/.config/i3/scripts/blur-lock
+
+[shutdown_menu]
+full_text=
+command=~/.config/i3/scripts/powermenu
+
+separator_block_width=15
+[simple-2]
+full_text=
+color=#b16286

config/i3/scripts/move_container_empty_workspace

@@ -0,0 +1,10 @@
+#!/usr/bin/env bash
+
+MAX_DESKTOPS=20
+
+WORKSPACES=$(seq -s '\n' 1 1 ${MAX_DESKTOPS})
+
+EMPTY_WORKSPACE=$( (i3-msg -t get_workspaces | tr ',' '\n' | grep num | awk -F:  '{print int($2)}' ; \
+            echo -e ${WORKSPACES} ) | sort -n | uniq -u | head -n 1)
+
+i3-msg move container to workspace ${EMPTY_WORKSPACE}

config/ideavimrc

@@ -0,0 +1,63 @@
+" .ideavimrc is a configuration file for IdeaVim plugin. It uses
+"   the same commands as the original .vimrc configuration.
+" You can find a list of commands here: https://jb.gg/h38q75
+" Find more examples here: https://jb.gg/share-ideavimrc
+
+
+"" -- Suggested options --
+" Show a few lines of context around the cursor. Note that this makes the
+" text scroll if you mouse-click near the start or end of the window.
+set scrolloff=5
+
+" Do incremental searching.
+set incsearch
+
+" Don't use Ex mode, use Q for formatting.
+map Q gq
+
+" --- Enable IdeaVim plugins https://jb.gg/ideavim-plugins
+
+" Highlight copied text
+Plug 'machakann/vim-highlightedyank'
+" Commentary plugin
+Plug 'tpope/vim-commentary'
+
+
+"" -- Map IDE actions to IdeaVim -- https://jb.gg/abva4t
+"" Map \r to the Reformat Code action
+"map \r <Action>(ReformatCode)
+
+"" Map <leader>d to start debug
+"map <leader>d <Action>(Debug)
+
+"" Map \b to toggle the breakpoint on the current line
+"map \b <Action>(ToggleLineBreakpoint)
+
+inoremap ,, <ESC>
+cnoremap ,, <ESC><ESC>
+nmap j gj
+nmap k gk
+" Only set on first run or it overwrites YCM behavior
+" if has('vim_starting')
+"     imap <tab> <C-X><C-O>
+" endif
+let mapleader=","
+let maplocalleader="\\"
+
+" Close buffer
+map <leader><leader>c :Bclose<CR>
+" Prev/next buffer
+map <leader>q :bp<CR>
+map <leader>w :bn<CR>
+
+" System clipboard cut copy paste
+map <leader>y "+y
+map <leader>Y "+Y
+map <leader>p "+p
+map <leader>P "+P
+map <leader>x "+x
+map <leader>dd "+dd
+
+" Update ideavimrc
+nnoremap <leader>v :e ~/.ideavimrc<CR>;
+nnoremap <leader>rr :action IdeaVim.ReloadVimRc.reload<CR>;

config/local-templates/profile.local

@@ -1 +1,4 @@
-POWERLINE_ROOT=/usr/share/powerline
+NO_NEOFETCH=1
+NO_GIT_CHECK=1
+NO_ZSH_COWSAY=1
+LOAD_SSH_KEYS=0

config/nvim/README.md

@@ -0,0 +1,143 @@
+# nvim config map
+
+Lua config managed by [lazy.nvim](https://github.com/folke/lazy.nvim). Leader is `,`, local leader is `\`.
+
+## Layout
+
+- `init.lua` — bootstraps lazy.nvim, loads `config/` then `plugins/`
+- `lua/config/options.lua` — `vim.opt` settings
+- `lua/config/keymaps.lua` — keymaps not tied to a specific plugin
+- `lua/config/autocmds.lua` — autocommands
+- `lua/plugins/*.lua` — one lazy.nvim spec file per topic (each file returns a plugin spec table; lazy.nvim loads every file in the directory automatically)
+- `ftplugin/*.lua` — filetype-specific settings (Python, vimwiki)
+- `lua/util.lua` — small helper functions (`ranger()`, `delete_trailing_ws()`) used from keymaps
+
+## Plugins
+
+### Navigation & editing (`plugins/editor.lua`)
+
+- **[neo-tree.nvim](https://github.com/nvim-neo-tree/neo-tree.nvim)** — file explorer sidebar
+  - `<leader>t` — toggle
+  - `<leader>cd` — cd to current file's directory and open
+- **[telescope.nvim](https://github.com/nvim-telescope/telescope.nvim)** — fuzzy finder for files/buffers/grep/LSP symbols
+  - `<leader>.` — jump to symbol
+  - `<leader>;` — jump to buffer
+  - `<leader>be` — jump to buffer, sorted by most recently used
+  - `<leader>ag` — live grep
+  - `<leader>?` — fuzzy-search all keybindings
+- **[flash.nvim](https://github.com/folke/flash.nvim)** — jump to any visible location via search-like labels
+  - `<leader>/` — jump
+  - `<leader>s` — search jump
+  - `<leader><leader>s` — treesitter jump
+  - `<leader>f` — forward jump
+- **[nvim-surround](https://github.com/kylechui/nvim-surround)** — add/change/delete surrounding pairs (quotes, tags, brackets)
+  - `ys`, `cs`, `ds` — plugin defaults
+- **[nvim-autopairs](https://github.com/windwp/nvim-autopairs)** — auto-close brackets/quotes, automatic
+- **[nvim-treesitter-context](https://github.com/nvim-treesitter/nvim-treesitter-context)** — sticky header showing enclosing function/class while scrolling, automatic
+- **[mini.align](https://github.com/echasnovski/mini.nvim)** — align text on a character
+  - `ga=`, `ga:`
+- **[mini.bufremove](https://github.com/echasnovski/mini.nvim)** — close a buffer without closing its window/split
+  - `<leader><leader>c`
+- **[vim-visual-multi](https://github.com/mg979/vim-visual-multi)** — multiple cursors
+  - `<C-n>` — add cursor on word
+- **[vim-tmux-navigator](https://github.com/christoomey/vim-tmux-navigator)** — move between nvim splits and tmux panes; also works from inside `:terminal` buffers (e.g. the Claude Code terminal)
+  - `<C-h/j/k/l>` — move left/down/up/right
+- **[emmet-vim](https://github.com/mattn/emmet-vim)** — Emmet expansion, HTML/CSS files only
+
+### UI (`plugins/ui.lua`)
+
+- **[gruvbox.nvim](https://github.com/ellisonleao/gruvbox.nvim)** — colorscheme
+- **[lualine.nvim](https://github.com/nvim-lualine/lualine.nvim)** — statusline
+- **[bufferline.nvim](https://github.com/akinsho/bufferline.nvim)** — buffer tabs along the top
+- **[indent-blankline.nvim](https://github.com/lukas-reineke/indent-blankline.nvim)** — indent guides
+- **[rainbow-delimiters.nvim](https://github.com/HiPhish/rainbow-delimiters.nvim)** — rainbow-colored matching brackets
+- **[nvim-web-devicons](https://github.com/nvim-tree/nvim-web-devicons)** — filetype icons (dependency for several plugins above)
+- **[alpha-nvim](https://github.com/goolord/alpha-nvim)** — start screen shown on launch, see [Dashboard](#dashboard) below
+  - `<leader><leader>o` — reopen
+
+### Completion & LSP
+
+- **[blink.cmp](https://github.com/Saghen/blink.cmp)** — completion engine (LSP, path, buffer sources) — `plugins/completion.lua`
+- **[mason.nvim](https://github.com/mason-org/mason.nvim)** / **[mason-lspconfig.nvim](https://github.com/mason-org/mason-lspconfig.nvim)** — installs/manages LSP servers — `plugins/lsp.lua`
+- **[nvim-lspconfig](https://github.com/neovim/nvim-lspconfig)** — LSP client config for `ts_ls`, `svelte`, `html`, `cssls`, `basedpyright`, `ruff`, `bashls` — `plugins/lsp.lua`
+- **[rustaceanvim](https://github.com/mrcjkb/rustaceanvim)** — Rust LSP setup (`rust_analyzer`), replaces the standard lspconfig flow for Rust — `plugins/rust.lua`
+  - `<localleader>rr` — cargo run
+
+LSP buffer keymaps (set on `LspAttach`, see `plugins/lsp.lua`):
+
+- `K` — hover
+- `gd` — definition
+- `gy` — type definition
+- `gi` — implementation
+- `gr` — references
+- `rn` — rename
+- `ff` (visual) — format selection
+
+### Debugging (`plugins/dap.lua`)
+
+- **[nvim-dap](https://github.com/mfussenegger/nvim-dap)** — Debug Adapter Protocol client
+  - `<leader>db` — toggle breakpoint
+  - `<leader>dc` — continue / start debugging
+  - `<leader>di` / `<leader>do` / `<leader>dO` — step into / over / out
+  - `<leader>dr` — toggle REPL
+  - `<leader>dq` — terminate session
+- **[nvim-dap-python](https://github.com/mfussenegger/nvim-dap-python)** — configures nvim-dap for Python using `debugpy`. Requires `:MasonInstall debugpy`; without it, debugging is skipped with a warning.
+
+### Formatting & linting (`plugins/format.lua`)
+
+- **[conform.nvim](https://github.com/stevearc/conform.nvim)** — format-on-save (prettier, ruff_format, rustfmt, stylua per filetype)
+- **[nvim-lint](https://github.com/mfussenegger/nvim-lint)** — async linting on save/insert-leave (eslint_d, shellcheck)
+
+### Treesitter (`plugins/treesitter.lua`)
+
+**[nvim-treesitter](https://github.com/nvim-treesitter/nvim-treesitter)** — syntax highlighting, folding, and indentation for the installed parser list. Uses core Neovim's built-in `vim.treesitter.start()`/foldexpr rather than the old treesitter modules.
+
+### Git (`plugins/git.lua`)
+
+- **[gitsigns.nvim](https://github.com/lewis6991/gitsigns.nvim)** — git change signs in the gutter, hunk stage/preview/blame
+- **[vim-fugitive](https://github.com/tpope/vim-fugitive)** — Git commands
+  - `:Git`, `:Gdiffsplit`, `:Gvdiffsplit`, `:Gread`, `:Gwrite`, `:Gclog`
+
+### AI (`plugins/ai.lua`)
+
+- **[snacks.nvim](https://github.com/folke/snacks.nvim)** — utility library (terminal provider etc.), dependency for claudecode.nvim
+- **[claudecode.nvim](https://github.com/coder/claudecode.nvim)** — Claude Code terminal integration. Diffs render as a single unified (VS Code-style, red/green interleaved) buffer in one new split next to your active pane, and keyboard focus stays in the Claude terminal instead of jumping to the diff.
+  - `<leader>ac` — toggle
+  - `<leader>af` — focus
+  - `<leader>ab` — add current buffer
+  - `<leader>as` (visual) — send selection
+  - `<leader>aa` / `<leader>ad` — accept/deny diff
+
+### Wiki / notes (`plugins/vimwiki.lua`)
+
+- **[vimwiki](https://github.com/vimwiki/vimwiki)** — personal wiki across 4 notebooks (bradwiki, work, private, shared under `~/synced-notebooks/`)
+  - `<leader>m...` — wiki keymaps (`vim.g.vimwiki_map_prefix`)
+- **[vim-zettel](https://github.com/michal-h21/vim-zettel)** — Zettelkasten-style note linking on top of vimwiki
+- **[vim-table-mode](https://github.com/dhruvasagar/vim-table-mode)** — markdown/wiki table formatting
+  - `:TableModeToggle`, or `<leader><leader>t...` prefix
+- **[markdown-preview.nvim](https://github.com/iamcco/markdown-preview.nvim)** — live browser preview for markdown/vimwiki
+  - `<localleader>v` — toggle preview
+
+### Misc (`plugins/misc.lua`)
+
+- **[aerial.nvim](https://github.com/stevearc/aerial.nvim)** — code outline/symbol sidebar
+  - `<leader>ct` — toggle
+- **[undotree](https://github.com/jiaoshijie/undotree)** — visual undo history tree
+  - `<leader>u` — toggle
+- **[persistence.nvim](https://github.com/folke/persistence.nvim)** — session save/restore per project
+  - restore from the dashboard's `s` button
+- **[which-key.nvim](https://github.com/folke/which-key.nvim)** — shows available keybindings as you type a prefix (e.g. pause after `<leader>`), automatic
+
+## Dashboard
+
+The start screen (shown on launch, reopen with `<leader><leader>o`) is [alpha-nvim](https://github.com/goolord/alpha-nvim), configured in `plugins/ui.lua`. It shows a random `fortune | cowthink` header plus buttons:
+
+- `e` — new file
+- `f` — find file (Telescope)
+- `g` — live grep (Telescope)
+- `s` — restore last session (persistence.nvim)
+- `q` — quit
+
+## Buffer navigation
+
+`<leader>be` fuzzy-searches open buffers via Telescope, sorted by most recently used, excluding the current buffer. `<leader>;` does the same but in default Telescope order. Both are fuzzy-filterable as you type.

config/nvim/bkp-init.vim

@@ -0,0 +1,21 @@
+" Source config files
+source $HOME/.config/nvim/config/plugin.vimrc
+source $HOME/.config/nvim/config/bindings-vimwiki.vimrc
+source $HOME/.config/nvim/config/init.vimrc
+source $HOME/.config/nvim/config/general.vimrc
+source $HOME/.config/nvim/config/bindings.vimrc
+source $HOME/.config/nvim/config/functions.vimrc
+
+" Python dependencies
+if isdirectory(expand($HOME.'/.pyenv/versions/neovim2'))
+    let g:python_host_prog=expand($HOME.'/.pyenv/versions/neovim2/bin/python')
+endif
+if isdirectory(expand($HOME.'/.pyenv/versions/neovim3'))
+    let g:python3_host_prog=expand($HOME.'/.pyenv/versions/neovim3/bin/python')
+endif
+
+" Local overrides
+let $LOCALFILE=expand("$HOME/.nvim_local.vimrc")
+if filereadable($LOCALFILE)
+    source $LOCALFILE
+endif

config/nvim/config/bindings-vimwiki.lua

@@ -1,78 +0,0 @@
-vim.cmd([[
-function! MapVimwiki()
-    " grep: if exists('g:loaded_vimwiki')
-    " double m
-    nmap <leader>mm <Plug>VimwikiIndex
-    " m wiki
-    nmap <leader>mw <Plug>VimwikiUISelect
-    " m help
-    nmap <leader>mhelp :verbose map ,m<CR>
-    " m go
-    nmap <leader>mg <Plug>VimwikiGoto
-    " m personal
-    nmap <leader>mf <Plug>VimwikiUISelect1<CR>
-    " m work
-    nmap <leader>m<Space> <Plug>VimwikiUISelect2<CR>
-    " m private
-    nmap <leader>mp <Plug>VimwikiUISelect3<CR>
-    " m shared
-    nmap <leader>ms <Plug>VimwikiUISelect4<CR>
-
-    " <C-Enter> and <S-Enter> (the original bindings for these) don't work
-    " because they send the same keycode and probably other reasons
-    nmap <leader>m- <Plug>VimwikiSplitLink
-    nmap <leader>m<bar> <Plug>VimwikiVSplitLink
-
-    nmap <leader>mnt <Plug>VimwikiNextTask
-    " TODO This command doesn't exist
-    " nmap <leader>mN <Plug>VimwikiPrevTask
-    nmap <leader>mnl <Plug>VimwikiNextLink
-    nmap <leader>mNl <Plug>VimwikiPrevLink
-    " nmap <leader>m/ <Plug>VimwikiSearch /
-    " nmap <leader>maq <Plug>ZettelOpen
-    nmap <Tab> <Plug>VimwikiIncreaseLvlSingleItem
-    nmap <S-Tab> <Plug>VimwikiDecreaseLvlSingleItem
-    imap <Tab> <Plug>VimwikiIncreaseLvlSingleItem
-    imap <S-Tab> <Plug>VimwikiDecreaseLvlSingleItem
-    vmap <Tab> <Plug>VimwikiIncreaseLvlSingleItem
-    vmap <S-Tab> <Plug>VimwikiDecreaseLvlSingleItem
-    " This is how to map insert mode plug commands <Esc><Plug>{command}a
-    " This always jumps to the end of the line, but with 'a' it doesn't skip
-    " the [ ] when adding at the start of the line
-    imap <C-Space> <Esc><Plug>VimwikiToggleListItemA
-    nmap <C-d><C-Space> <Plug>VimwikiRemoveSingleCB
-    imap <C-d><C-Space> <Esc><Plug>VimwikiRemoveSingleCBa
-    nmap <leader>mb <Plug>VimwikiBackLinks
-    " nmap <leader>m\ <Plug>VimwikiTable 
-    nmap <leader>mqtoc <Plug>VimwikiTOC
-    nmap <leader>mqgtl <Plug>VimwikiRebuildTags<CR><Plug>VimwikiGenerateTagLinks<CR>
-
-    " Insert link from system clipboard
-    vmap <leader>mk c[]<Esc>Pea()<Esc>"+P
-    imap <leader>mk <Esc>viW<C-k>ea
-    nmap <leader>mk ciw[]<Esc>Pea()<Esc>"+P
-
-    " TODO: None of these work
-    " nmap <leader>m| :VimwikiVSplitLink 1 1<CR>
-    " nmap <leader>m- :VimwikiSplitLink 1 1<CR>
-    " vmap <leader>m- :VimwikiSplitLink 1 1<CR>
-
-    " Vim-Zettel
-    " TODO The <Plug> syntax is correct but broken
-    " autocmd Filetype vimwiki nmap <leader>mag <Plug>ZettelOpen
-    autocmd Filetype vimwiki nmap <leader>mag :ZettelOpen<CR>
-    " autocmd Filetype vimwiki nmap <leader>mp0 :ZettelOpen<CR>p0
-    " autocmd Filetype vimwiki nmap <leader>mp1 :ZettelOpen<CR>p1
-    " TODO This doesn't work
-    autocmd Filetype vimwiki nmap <leader>mat :ZettelOpen<CR>title:
-endfunction
-
-augroup Vimwiki_Mappings
-    autocmd!
-    " TODO: This isn't working, vimwiki bindings are not being initialized
-    autocmd FileType vimwiki :call MapVimwiki()
-augroup END
-" TODO This shouldn't be necessary, why does this need to be called before vimwiki
-" and after startup?
-" :call MapVimwiki()
-]])

config/nvim/config/bindings.lua

@@ -1,191 +0,0 @@
-vim.cmd([[
-" --- Mappings ---
-" Explanation of mapping commands: https://stackoverflow.com/a/3776182
-" - General -
-" TODO: Remap this to easymotion but don't step on other bindings
-" noremap <space> :
-inoremap ,, <ESC>
-cnoremap ,, <ESC><ESC>
-nmap j gj
-nmap k gk
-" Only set on first run or it overwrites YCM behavior
-" if has('vim_starting')
-"     imap <tab> <C-X><C-O>
-" endif
-let mapleader=","
-let maplocalleader="\\"
-" Clear highlighting on ,, in normal mode
-map <leader><leader><ESC> :nohl<CR>
-" Enable hex mode
-map <leader>\he :%!xxd<CR>
-" Disable hex mode
-map <leader>\hd :%!xxd -r<CR>
-" Show whitespace
-nmap <leader><leader>lw :set list!<CR>
-" List registers
-map <leader><leader>lr :reg<CR>
-" List marks
-map <leader><leader>lm :marks<CR>
-" Close buffer
-map <leader><leader>c :Bclose<CR>
-" Prev/next buffer
-map <leader>q :bp<CR>
-map <leader>w :bn<CR>
-" System clipboard cut copy paste
-map <leader>y "+y
-map <leader>Y "+Y
-map <leader>p "+p
-map <leader>P "+P
-map <leader>x "+x
-map <leader>dd "+dd
-" Line break above
-" TODO urxvt (and other ttys) treat C-CR, S-CR, and CR as the same input
-" imap <C-CR> <CR><ESC><ESC>Bkki
-" Move between splits
-nnoremap <C-j> <C-W><C-j>
-nnoremap <C-k> <C-W><C-k>
-nnoremap <C-h> <C-W><C-h>
-nnoremap <C-l> <C-W><C-l>
-" Make split
-nnoremap <leader>- :sp<space>
-nnoremap <leader><bar> :vsp<space>
-set splitbelow
-set splitright
-" Open vimrc
-map <leader>v :e $MYVIMRC<CR>
-" Set working directory to current file directory
-map <leader>cd :cd %:p:h<CR>:pwd<CR>:NERDTreeCWD<CR>:NERDTreeToggle<CR>
-" Update vimrc
-map <leader>rr :call ReloadVimRC()<CR>;
-" Open GVim menu
-" map <leader>m :emenu <C-Z><C-Z>
-" Low-light mode
-map <leader><leader>ll :set background=dark<CR>
-" Daylight mode
-map <leader><leader>LL :set background=light<CR>
-" Open ranger
-nmap <leader>ra :call Ranger()<CR>
-" Delete whitespace
-nmap <leader>rw :call DeleteTrailingWS()<CR>
-" Fix syntax highlighting
-noremap <F12> <Esc>:syntax sync fromstart<CR>
-
-
-function! MapPlugins()
-    " - Plugins -
-    if exists('g:loaded_startify')
-        " Open Startify
-        map <leader><leader>o :Startify<CR>
-    endif
-
-    if exists('g:loaded_nerd_tree')
-        " Toggle directory view
-        map <leader>t :NERDTreeToggle<CR>
-    endif
-
-    " Generative AI
-
-    if exists('g:loaded_tagbar')
-        " Toggle tagbar
-        map <leader>ct :TagbarToggle<CR>
-    endif
-
-    if exists('g:loaded_vimwiki')
-        " TODO This shouldn't be necessary!
-        " NOTE: Changes must be mirrored to config/bindings-vimwiki.vimrc!
-    endif
-
-    if exists('g:loaded_table_mode')
-    endif
-
-    if exists('g:loaded_zettel')
-        let g:zettel_default_mappings = 0
-    endif
-
-    " Update ctags
-    " nnoremap <leader>ct :! ctags -R<CR><CR>
-
-    if exists('g:loaded_ctrlp')
-        " Jump to a tag
-        nnoremap <leader>. :CtrlPTag<CR>
-        " Jump to a buffer
-        nnoremap <leader>; :CtrlPBuffer<CR>
-    endif
-
-    " Make a config for YCM from Makefile
-    map <leader>ygc :YcmGenerateConfig<CR>
-
-    " Ag
-    map <leader>ag :Ag<space>
-
-    " Easymotion
-    if exists('g:EasyMotion_loaded')
-        " let g:EasyMotion_do_mapping = 0
-        let g:EasyMotion_smartcase = 1
-        map <leader>/ <Plug>(easymotion-sn)
-        omap <leader>/ <Plug>(easymotion-tn)
-        " map <leader>n <Plug>(easymotion-next)
-        " map <leader>N <Plug>(easymotion-prev)
-        " Bidirectional single-letter search
-        map <leader>s <Plug>(easymotion-s)
-        " Bidirectional 2-letter search
-        map <leader><leader>s <Plug>(easymotion-s2)
-        " Forward single letter search
-        map <leader>f <Plug>(easymotion-f)
-        " Directional jumps
-        map <leader>l <Plug>(easymotion-lineforward)
-        map <leader>j <Plug>(easymotion-j)
-        map <leader>k <Plug>(easymotion-k)
-        map <leader>h <Plug>(easymotion-linebackward)
-    endif
-
-    " Multiple Cursors
-    let g:multi_cursor_use_default_mapping=0
-    let g:multi_cursor_next_key='n'
-    let g:multi_cursor_prev_key='m'
-    let g:multi_cursor_skip_key='.'
-    let g:multi_cursor_quit_key=','
-    let g:multi_cursor_start_key='<C-n>'
-
-    if exists('g:tabular_loaded')
-        " Tabular
-        map <leader>a= :Tabularize /=<CR>
-        map <leader>a: :Tabularize /:\zs<CR>
-    endif
-
-    if exists('g:loaded_nerd_comments')
-        " NERD Commenter
-        " Enter the NERD Commenter menu which can be tabbed through
-        map <leader>nc :emenu Plugin.comment.<C-Z><C-Z>
-    endif
-
-    if exists('g:loaded_gundo')
-        " Gundo
-        nnoremap <leader>u :GundoToggle<CR>
-    endif
-
-    " --- Language Specific ---
-    " - General
-    " COC
-    " Use K to show documentation in preview window
-    nnoremap  K :call ShowDocumentation()
-
-    nmap ff <plug>(coc-format-selected)
-    nmap rn <plug>(coc-rename)
-    nmap gd <plug>(coc-definition)
-    nmap gy <plug>(coc-type-definition)
-    nmap gi <plug>(coc-implementation)
-    nmap gr <plug>(coc-references)
-
-    " - Rust -
-    map <localleader>rr :RustRun<CR>
-
-    " - Markdown -
-    map <localleader>v :LivedownToggle<CR>
-endfunction
-
-augroup Plugin_Mappings
-    autocmd!
-    autocmd VimEnter * :call MapPlugins()
-augroup END
-]])

config/nvim/config/bindings.vimrc

@@ -82,8 +82,6 @@ function! MapPlugins()
         map <leader>t :NERDTreeToggle<CR>
     endif
 
-    " Generative AI
-
     if exists('g:loaded_tagbar')
         " Toggle tagbar
         map <leader>ct :TagbarToggle<CR>
@@ -163,6 +161,16 @@ function! MapPlugins()
         nnoremap <leader>u :GundoToggle<CR>
     endif
 
+    if exists('g:loaded_claudecode')
+        " Claude Code
+        nnoremap <leader>ac :ClaudeCode<CR>
+        nnoremap <leader>af :ClaudeCodeFocus<CR>
+        nnoremap <leader>ab :ClaudeCodeAdd %<CR>
+        vnoremap <leader>as :ClaudeCodeSend<CR>
+        nnoremap <leader>aa :ClaudeCodeDiffAccept<CR>
+        nnoremap <leader>ad :ClaudeCodeDiffDeny<CR>
+    endif
+
     " --- Language Specific ---
     " - General
     " COC
@@ -180,7 +188,8 @@ function! MapPlugins()
     map <localleader>rr :RustRun<CR>
 
     " - Markdown -
-    map <localleader>v :LivedownToggle<CR>
+    " map <localleader>v :LivedownToggle<CR>
+    nmap <localleader>v <Plug>MarkdownPreviewToggle
 endfunction
 
 augroup Plugin_Mappings

config/nvim/config/functions.lua

@@ -1,62 +0,0 @@
-vim.cmd([[
-"------ Functions ------
-if executable('ranger')
-    " Open ranger from within vim
-    function! Ranger()
-        " Get a temp file name without creating it
-        let tmpfile = substitute(system('mktemp -u'), '\n', '', '')
-        " Launch ranger, passing it the temp file name
-        silent exec '!RANGER_RETURN_FILE='.tmpfile.' ranger'
-        " If the temp file has been written by ranger
-        if filereadable(tmpfile)
-            " Get the selected file name from the temp file
-            let filetoedit = system('cat '.tmpfile)
-            exec 'edit '.filetoedit
-            call delete(tmpfile)
-        endif
-        redraw!
-    endfunction
-endif
-
- " set viminfo=%M
-
-" Delete trailing white space on save, useful for Python and CoffeeScript ;)
-func! DeleteTrailingWS()
-    silent! normal mz
-    silent! %s/\s\+$//ge
-    silent! normal `z
-endfunc
-" autocmd BufWrite *.py :call DeleteTrailingWS()
-" autocmd BufWrite *.coffee :call DeleteTrailingWS()
-
-" Only define if not defined, otherwise it'll be redefined in the middle of
-" execution
-if !exists("*ReloadVimRC")
-    func! ReloadVimRC()
-        " IMPORTANT: After way too much messing with this trying to make everything work properly
-        " after a vimrc reload, my advice is DON'T RELOAD THE VIMRC WHILE EDITING A FILE!
-        " Side effects will include: Some syntax highlighting lost until next save, indentline
-        " plugin will break, newly opened buffers will use buffer reloaded on's syntax file for
-        " comment plugins (and possibly other things)
-        " Ommision of 'syntax on' here will prevent anything from breaking inside the current buffer,
-        " however new buffers will be opened without any syntax highlighting
-        source $MYVIMRC
-        " Need to toggle this twice, once toggles every other time, none turns
-        " it off on reload. I have no idea why this is.
-        RainbowToggle
-        RainbowToggle
-        syntax on
-        " Workaround for indentline turning off on syntax enable
-        IndentLinesReset
-    endfunc
-endif
-
-" COC Show Documentation under cursor
-function! ShowDocumentation()
-  if (index(['vim','help'], &filetype) >= 0)
-    execute 'h '.expand('')
-  else
-    call CocAction('doHover')
-  endif
-endfunction
-]])

config/nvim/config/general.lua

@@ -1,164 +0,0 @@
-vim.cmd([[
-" Needed for vimwiki
-set nocompatible
-filetype plugin on
-syntax on
-
-" Control-X Control-O to open autocomplete box
-set omnifunc=syntaxcomplete#Complete
-" Leave hidden buffers open
-set hidden
-set autoread " Reload files changed outside vim
-
-" Turn off .swp files
-set noswapfile
-set nobackup
-
-set t_Co=256 " Run in 256-color mode
-set number " Show line numbers
-
-" Set the clipbaord
-" set clipboard+=unnamedplus
-" let g:clipboard = {
-"     \   'name': 'myClipboard',
-"     \   'copy': {
-"     \       '+': 'tmux load-buffer -',
-"     \       '*': 'tmux load-buffer -',
-"     \   },
-"     \   'paste': {
-"     \       '+': 'tmux save-buffer -',
-"     \       '*': 'tmux save-buffer -',
-"     \   },
-"     \   'cache_enabled': 1,
-"     \ }
-" let g:loaded_clipboard_provider=1
-
-
-" Matchit plugin enhances %
-runtime macros/matchit.vim
-
-" Set unix line endings
-" set fileformat=unix
-
-" Set encoding for vim-devicons
-set encoding=UTF-8
-
-" Don't redraw screen when not needed
-set lazyredraw
-
-" Allow backspacing over everything
-set backspace=indent,eol,start
-
-" Keep longer history
-set history=700
-
-" Incremental search
-set incsearch
-
-" Smart case insensitive search
-set ignorecase
-set smartcase
-
-" Maintain context around cursor
-set scrolloff=15
-
-" Wildmode configuration
-set wildmode=longest,list,full
-set wildmenu
-" Make hardcoded tab work
-:set wildcharm=<C-Z>
-
-" Mouse support
-set mouse=a
-
-" Configure tab behavior
-set tabstop=4
-set softtabstop=4
-set expandtab
-set shiftwidth=4
-" set autoindent
-set cindent
-set cinkeys-=0#
-set indentkeys-=0#
-" set smartindent
-
-" Linewrap
-set wrap linebreak nolist
-
-" Show current position
-set ruler
-
-" Show matching brackets
-set showmatch
-
-" Make conceals less of an issue to edit by expanding on cursor
-let g:indentLine_concealcursor=""
-let g:indentLine_conceallevel=2
-
-" Code folding
-set foldmethod=syntax
-set foldcolumn=5
-set foldlevel=2
-set foldlevelstart=2
-let g:vimwiki_folding='list'
-let g:markdown_folding=1
-
-" Make views automatic (they store folds)
-set viewoptions-=options
-" TODO: These caused all of my buffers to cycle on buffer operations and
-" slowed things down
-" autocmd BufWinLeave * if expand("%") != "" | silent! mkview! | endif
-" autocmd BufWinEnter * if expand("%") != "" | silent! loadview | endif
-
-" Don't open empty buffer when starting existing session
-set shortmess+=I
-
-" Load default menus
-source $VIMRUNTIME/menu.vim
-
-" Always display airline statusline
-set laststatus=2
-" Hide default statusline text
-set noshowmode "
-
-" Theme
-" colorscheme zenburn
-" colorscheme solarized
-" colorscheme base16-default
-" colorscheme hybrid_reverse
-" colorscheme hybrid_material
-try
-    silent! colorscheme gruvbox
-catch /^Vim\%((\a\++)\)\=:E185/
-    colorscheme desert
-endtry
-
-set termguicolors
-
-let g:enable_bold_font = 1
-
-" Have vrm extend background color to full terminal screen
-set t_ut=
-
-" --- GUI settings ---
-" set lines=50
-" set columns=150
-
-" --- Language specific settings ---
-" autocmd! BufNewFile,BufReadPre,FileReadPre,BufEnter * set expandtab softtabstop=4 shiftwidth=4
-augroup Enter_Buffer
-    autocmd!
-    autocmd BufNewFile,BufReadPre,FileReadPre,BufEnter *.pde setlocal softtabstop=2 shiftwidth=2
-    autocmd BufNewFile,BufReadPre,FileReadPre,BufEnter Makefile setlocal noexpandtab softtabstop=0 shiftwidth=8
-    autocmd BufNewFile,BufReadPre,FileReadPre,BufEnter *.asm,*.S setlocal softtabstop=8 shiftwidth=8
-augroup END
-
-au BufNewFile,BufRead *.py
-\ setlocal tabstop=4 |
-\ setlocal softtabstop=4 |
-\ setlocal shiftwidth=4 |
-\ setlocal textwidth=79 |
-\ setlocal expandtab |
-\ setlocal autoindent |
-\ setlocal fileformat=unix |
-]])

config/nvim/config/init.lua

@@ -1,187 +0,0 @@
-vim.cmd([[
-let g:vim_plug_install_dir = "~/.local/share/nvim/site/autoload"
-let g:plugin_install_dir = "~/.local/share/nvim/plugged"
-
-" Install vim-plug if not present
-if empty(glob(g:vim_plug_install_dir . "/plug.vim"))
-    execute "!curl -fLo " . g:vim_plug_install_dir . "/plug.vim "
-        \ "--create-dirs https://raw.githubusercontent.com/junegunn/vim-plug/master/plug.vim"
-endif
-
-call plug#begin('~/.vim/plugged')
-
-" --- General ---
-" - Visual -
-" Rainbow parentheses
-Plug 'luochen1990/rainbow'
-" Gruvbox
-Plug 'morhetz/gruvbox'
-" Airline
-" TODO This now depends on lua
-Plug 'bling/vim-airline'
-
-" - Views -
-" Start screen
-Plug 'mhinz/vim-startify'
-" Directory view
-Plug 'scrooloose/nerdtree'
-" Visualize undo tree
-Plug 'sjl/gundo.vim'
-" Much nicer buffer management
-Plug 'jlanzarotta/bufexplorer'
-" Shows indentation level
-Plug 'yggdroot/indentLine'
-" Show marks
-" TODO Make this not conflict with ,mm for vimwiki, probably just an issue
-" with not having vimwiki installed yet
-" Plug 'kshenoy/vim-signature'
-"
-" - Sessions -
-" Better sessions
-Plug 'tpope/vim-obsession'
-
-" - Generative AI -
-Plug 'David-Kunz/gen.nvim'
-
-" - Ctags -
-" Ctags view
-Plug 'majutsushi/tagbar'
-" Automatically keep ctags up to date
-" Plug 'xolox/vim-easytags'
-" TODO Fix compatibility with vim-zettel
-" Plug 'c0r73x/neotags.nvim'
-
-" - Syntax and completion -
-" Asynchronous linting
-Plug 'neomake/neomake'
-" Completion
-Plug 'Shougo/deoplete.nvim', { 'do': ':UpdateRemotePlugins' }
-" Awesome autocompletion for almost everything
-" Plug 'Valloric/YouCompleteMe', {
-    "      \ 'build' : {
-        "      \     'mac' : './install.sh --clang-completer --system-libclang --omnisharp-completer --racer-completer',
-            "      \     'unix' : './install.sh --clang-completer --system-libclang --omnisharp-completer --racer-completer',
-            "      \     'windows' : './install.sh --clang-completer --system-libclang --omnisharp-completer --racer-completer',
-            "      \     'cygwin' : './install.sh --clang-completer --system-libclang --omnisharp-completer --racer-completer'
-                "      \    }
-    "      \ }
-
-" - Commenting -
-" Comment toggling with lots of options
-Plug 'scrooloose/nerdcommenter'
-" Simple, quick commenting
-Plug 'tpope/vim-commentary'
-
-" - Git -
-" Shows git changes in the side gutter
-" Plug 'airblade/vim-gitgutter'
-Plug 'mhinz/vim-signify'
-" Git wrapper inside vim
-Plug 'tpope/vim-fugitive'
-
-" - Automation -
-" Surround things and change surroundings
-Plug 'tpope/vim-surround'
-" Parentheses and bracket auto-close
-Plug 'Raimondi/delimitMate'
-" Much nicer navigation
-" TODO Move this to space key
-Plug 'easymotion/vim-easymotion'
-" Multiple cursors
-Plug 'terryma/vim-multiple-cursors'
-" Automatic alignment
-Plug 'godlygeek/tabular'
-" Tables
-Plug 'dhruvasagar/vim-table-mode'
-
-" - Search -
-" Kickass fuzzy finder for whole filesystem
-Plug 'ctrlpvim/ctrlp.vim'
-" Can use Ag from vim
-" Plug 'rking/ag.vim'
-
-" - Utility and dependencies
-" Library required for some plugins
-" Plug 'L9'
-" Close buffers
-Plug 'rbgrouleff/bclose.vim'
-" Seamless navigation between tmux panes and vim splits
-Plug 'christoomey/vim-tmux-navigator'
-" Required for easytags
-Plug 'xolox/vim-misc'
-" Make . work for plugins
-Plug 'tpope/vim-repeat'
-" Auto reload changed config
-Plug 'xolox/vim-reload'
-" Make configuration files for YCM
-" Plug 'rdnetto/YCM-Generator'
-
-" - Note Taking -
-" Note taking and wiki managment
-Plug 'vimwiki/vimwiki'
-" TODO Why can't these go in Search?
-Plug 'junegunn/fzf'
-Plug 'junegunn/fzf.vim'
-Plug 'michal-h21/vim-zettel'
-" TODO Make this pull on buffer open / load
-" Plug 'michal-h21/vimwiki-sync'
-
-" --- Language specific ---
-" - All -
-Plug 'sheerun/vim-polyglot'
-" Integration with language servers but manual configuration
-Plug 'neoclide/coc.nvim', {'branch': 'release'}
-" Allows vim to configure filetype by file section (for svelte)
-Plug 'Shougo/context_filetype.vim'
-" Prettier
-Plug 'prettier/vim-prettier', {
-  \ 'do': 'npm install',
-  \ 'for': ['javascript', 'typescript', 'css', 'less', 'scss', 'json', 'graphql', 'markdown', 'vue', 'svelte', 'yaml', 'html'] }
-
-" - Web -
-Plug 'mattn/emmet-vim'
-Plug 'mattn/webapi-vim'
-Plug 'cakebaker/scss-syntax.vim'
-
-" - Python -
-" Plug 'klen/python-mode'
-" Plug 'davidhalter/jedi-vim'
-" Completion
-" Plug 'zchee/deoplete-jedi'
-
-" - C# -
-" Omnicompletion and syntax
-" Plug 'OmniSharp/omnisharp-vim'
-
-" - Rust -
-" Syntax and autocompletion
-" Plug 'rust-lang/rust.vim'
-" Plug 'phildawes/racer'
-
-" - Javascript -
-Plug 'pangloss/vim-javascript'
-
-" - Typescript -
-Plug 'HerringtonDarkholme/yats.vim'
-" TODO: Needs to be installed with `:CocInstall coc-tsserver`, figure out how
-" to config this
-" Plug 'coc-extensions/coc-tsserver'
-
-" - Svelte
-" Plug 'evanleck/vim-svelte', {'branch': 'main'}
-Plug 'leafOfTree/vim-svelte-plugin'
-Plug 'coc-extensions/coc-svelte'
-
-" - Processing -
-Plug 'sophacles/vim-processing'
-
-" - Markdown -
-" Plug 'shime/vim-livedown'
-
-
-" --- Icons ---
-" For some reason this needs to be loaded last
-Plug 'ryanoasis/vim-devicons'
-
-call plug#end()
-]])

config/nvim/config/init.vimrc

@@ -1,5 +1,5 @@
 let g:vim_plug_install_dir = "~/.local/share/nvim/site/autoload"
-let g:plugin_install_dir = "~/.local/share/nvim/plugged"
+let g:plugin_install_dir = "~/.vim/plugged"
 
 " Install vim-plug if not present
 if empty(glob(g:vim_plug_install_dir . "/plug.vim"))
@@ -39,9 +39,6 @@ Plug 'yggdroot/indentLine'
 " Better sessions
 Plug 'tpope/vim-obsession'
 
-" - Generative AI -
-Plug 'David-Kunz/gen.nvim'
-
 " - Ctags -
 " Ctags view
 Plug 'majutsushi/tagbar'
@@ -119,7 +116,7 @@ Plug 'xolox/vim-reload'
 " Note taking and wiki managment
 Plug 'vimwiki/vimwiki'
 " TODO Why can't these go in Search?
-Plug 'junegunn/fzf'
+Plug 'junegunn/fzf', { 'do': { -> fzf#install() } }
 Plug 'junegunn/fzf.vim'
 Plug 'michal-h21/vim-zettel'
 " TODO Make this pull on buffer open / load
@@ -176,6 +173,14 @@ Plug 'sophacles/vim-processing'
 
 " - Markdown -
 " Plug 'shime/vim-livedown'
+" Plug 'iamcco/markdown-preview.nvim', { 'do': 'cd app && npx --yes yarn install' }
+Plug 'iamcco/markdown-preview.nvim', { 'do': { -> mkdp#util#install() }, 'for': ['markdown', 'vim-plug']}
+
+" --- AI ---
+" Floating/split terminal windows used by claudecode.nvim
+Plug 'folke/snacks.nvim'
+" Claude Code integration
+Plug 'coder/claudecode.nvim'
 
 
 " --- Icons ---

config/nvim/config/plugin.lua

@@ -1,333 +0,0 @@
-require('gen').setup({
-    model = "phi",
-    host = "10.0.2.11",
-    port = "11434"
-})
-vim.cmd([[
-" Table of Contents
-" --- General ---
-" - Visual -
-" - Views -
-" - 
-" TODO
-
-" --- General ---
-" - Sessions -
-" Create new session optionally with given name. These show up in Startify
-command -nargs=? SessionNew :Obsess ~/.local/share/nvim/session/<args>
-command -nargs=0 SessionEnd :Obsess!
-command -nargs=1 SessionLoad :source ~/.local/share/nvim/session/<args>
-" TODO Could use g:startify_session_persistence and just rely on that
-
-" - Visual -
-set background=dark
-let base16colorspace=256
-" let g:solarized_termtrans = 3
-
-" Airline
-let g:airline_powerline_fonts=1
-" PERF: Could cause bad performance
-" let g:airline_skip_empty_sections=1
-let g:airline#extensions#tabline#enabled=1
-" Modify the statusbar if a recording is in session
-" TODO: This prevents some extensions (tagbar, virtualenv) from using the
-" section
-" TODO: Only if Obsession installed!
-let g:airline_section_x='%{ObsessionStatus("Session Recording |", "")} %{&filetype}'
-
-" Gruvbox
-let g:gruvbox_italic=1
-let g:gruvbox_contrast_dark="medium"
-let g:gruvbox_contrast_light="soft"
-let g:gruvbox_invert_selection=1
-let g:gruvbox_invert_signs=0
-let g:gruvbox_improved_strings=0
-let g:gruvbox_improved_warnings=1
-let g:gruvbox_italicize_strings=1
-
-" Rainbow parentheses
-" if exists('g:rainbow_conf')
-"     augroup Rainbow_Parentheses
-"         autocmd!
-"         autocmd VimEnter * if exists('g:rainbow_conf') |
-"         \ RainbowToggle |
-"         \ endif
-"     augroup END
-" endif
-
-" - Views -
-" Startify
-let g:startify_bookmarks = [
-    \"~/dotfiles/config/nvim/config/init.vimrc",
-    \"~/dotfiles/config/nvim/config/general.vimrc",
-    \"~/dotfiles/config/nvim/config/plugin.vimrc",
-    \"~/dotfiles/config/nvim/config/bindings.vimrc",
-    \"~/dotfiles/config/nvim/config/functions.vimrc",
-    \"~/dotfiles/zshrc",
-    \"~/dotfiles/config/i3/config"
-    \]
-let g:startify_custom_indices = ['f', 'd', 's', 'a', 'g']
-let g:startify_custom_header = map(split(system('fortune -a -s | fmt -80 -s | cowthink -$(shuf -n 1 -e b d g p s t w y) -f $(shuf -n 1 -e $(cowsay -l | tail -n +2)) -n'), '\n'), '"   ". v:val') + [","]
-" let g:startify_lists = [
-" \ { 'type': 'files',     'header': ['   MRU']            },
-" \ { 'type': 'dir',       'header': ['   MRU '. getcwd()] },
-" \ { 'type': 'sessions',  'header': ['   Sessions']       },
-" \ { 'type': 'bookmarks', 'header': ['   Bookmarks']      },
-" \ { 'type': 'commands',  'header': ['   Commands']       },
-" \ ]
-
-" Automatically open tagbar when entering supported buffer
-" autocmd BufEnter * nested :call tagbar#autoopen(0)
-
-" - Generative AI -
-
-" - Utility -
-" DelimitMate sane bracing
-let delimitMate_expand_cr = 1
-
-" Indent Guide configuration
-" set ts=2 sw=2 et
-let g:indent_guides_enable_on_vim_startup = 0
-let g:indent_guides_start_level = 2
-let g:indent_guides_auto_colors = 0
-augroup Indent_Guides
-    autocmd!
-    autocmd VimEnter,Colorscheme * if exists('g:indentLine_loaded') |
-        \ :hi IndentGuidesOdd ctermbg=darkgreen |
-        \ endif
-    autocmd VimEnter,Colorscheme * if exists('g:indentLine_loaded') |
-        \ :hi IndentGuidesEven ctermbg=cyan |
-        \ endif
-augroup END
-
-" Indent Line configuration
-let g:indentLine_faster = 1
-" let g:indentLine_leadingSpaceEnabled = 1
-" let g:indentLine_leadingSpaceChar = '.'
-
-" GitGutter
-let g:gitgutter_map_keys = 0
-
-" NERD Commenter
-" let g:NERDMenuMode = 1
-
-" NERD Tree
-" This causes an extra buffer to open when nvim starts
-" augroup DIRCHAANGE
-"     au!
-"     autocmd DirChanged global :NERDTreeCWD
-" augroup END
-
-" Sort by modification date
-let NERDTreeSortOrder = ['[ [-timestamp] ]']
-
-" Ctrl-P configuration
-" Use nearest version control directory as cwd
-let g:ctrlp_working_path_mode = 'r'
-
-" Syntastic configuration
-let g:syntastic_aggregate_errors = 1
-
-let g:syntastic_always_populate_loc_list = 1
-let g:syntastic_auto_loc_list = 1
-let g:syntastic_check_on_open = 1
-let g:syntastic_check_on_wq = 0
-let g:syntastic_mode_map = {
-    \ "mode": "active",
-    \ "passive_filetypes": ['asm', 'scss'] }
-
-" YCM configuration
-let g:ycm_global_ycm_extra_conf = '~/dotfiles/.ycm_extra_conf.py'
-let g:ycm_extra_conf_globlist = ['~/dotfiles/.ycm_extra_conf.py']
-
-let g:ycm_server_keep_logfiles = 1
-let g:ycm_server_log_level = 'debug'
-" let g:loaded_youcompleteme = 1
-" let g:ycm_min_num_of_chars_for_completion = 100
-let g:neobundle#install_process_timeout = 1500
-" nnoremap <leader><leader>zy :let g:ycm_auto_trigger=0<CR>
-" nnoremap <leader><leader>zY :let g:ycm_auto_trigger=1<CR>
-
-" Powerline configuration
-let g:powerline_pycmd = "py"
-" let g:powerline_pyeval = "pyeval"
-
-" Neotags configuration
-" let g:neotags_enabled = 1
-
-" Vimwiki configuration
-let g:vimwiki_list = [
-            \{'path': '~/synced-notebooks/bradwiki/', 'syntax': 'markdown', 'ext': '.md', 'diary_rel_path': 'daily_notes/', 'diary_index': 'index', 'diary_header': 'Daily Notes', 'auto_tags': 1, 'auto_diary_index': 1, 'auto_generate_links': 1, 'auto_generate_tags': 1},
-            \{'path': '~/synced-notebooks/work_notebook/', 'syntax': 'markdown', 'ext': '.md', 'diary_rel_path': 'daily_notes/', 'diary_index': 'index', 'diary_header': 'Daily Notes', 'auto_tags': 1, 'auto_diary_index': 1, 'auto_generate_links': 1, 'auto_generate_tags': 1},
-            \{'path': '~/synced-notebooks/privatewiki/', 'syntax': 'markdown', 'ext': '.md'},
-            \{'path': '~/synced-notebooks/sharedwiki/', 'syntax': 'markdown', 'ext': '.md'}]
-let g:vimwiki_map_prefix = '<Leader>m'
-augroup filetype_vimwiki
-    autocmd!
-    " Wrap lines nicely
-    autocmd Filetype vimwiki set breakindent
-    autocmd Filetype vimwiki set breakindentopt=shift:2
-augroup END
-
-" Vim-Zettel configuration
-let g:zettel_options = [{}, {"front_matter": [["tags", ""], ["type", "note"] ], "template": "~/work_notebook/templates/daily_note.tpl"}]
-
-" Table Mode configuration
-let g:table_mode_map_prefix = '<Leader><Leader>t'
-
-" --- Language Specific ---
-" - All -
-" let g:polyglot_disabled = ['python']
-
-" COC
-" let g:coc_node_path = '$HOME/.nvm/versions/node/v12.16.3/bin/node'
-
-set updatetime=300
-set shortmess+=c " don't give |ins-completion-menu| messages.
-
-" - Svelte -
-let g:svelte_preprocessor_tags = [
-\   { 'name': "ts", 'tag': "script", 'as': "typescript" }
-\ ]
-let g:svelte_preprocessors = ["scss", "sass", "typescript", "ts"]
-let g:vim_svelte_plugin_load_full_syntax = 1
-let g:vim_svelte_plugin_use_sass = 1
-let g:vim_svelte_plugin_use_typescript = 1
-let g:vim_svelte_plugin_use_foldexpr = 0
-
-if !exists('g:context_filetype#same_filetypes')
-  let g:context_filetype#filetypes = {}
-endif
-
-let g:context_filetype#filetypes.svelte =
-\ [
-\   {'filetype' : 'typescript', 'start': '<script\%( [^>]*\)\? \%(ts\|lang="\%(ts\|typescript\)"\)\%( [^>]*\)\?>', 'end': '</script>'},
-\   {'filetype' : 'javascript', 'start' : '<script \?.*>', 'end' : '</script>'},
-\   {'filetype' : 'scss', 'start' : '<style \?.*lang=''scss''>', 'end' : '</style>'},
-\   {'filetype' : 'sass', 'start' : '<style \?.*lang="sass">', 'end' : '</style>'},
-\   {'filetype' : 'css', 'start' : '<style \?.*>', 'end' : '</style>'},
-\ ]
-
-let g:ft = ''
-
-" For NERDCommenter
-let g:NERDSpaceDelims = 1
-" let g:NERDCompactSexyComs = 1
-
-fu! NERDCommenter_before()
-  if (&ft == 'html') || (&ft == 'svelte')
-    let g:ft = &ft
-    let cfts = context_filetype#get_filetypes()
-    if len(cfts) > 0
-      if cfts[0] == 'svelte'
-        let cft = 'html'
-      else
-        let cft = cfts[0]
-      endif
-      echo "Using filetype=".cft." for comment"
-      exe 'setf '.cft
-      if exists('b:NERDCommenterDelims')
-        unlet b:NERDCommenterDelims
-      endif
-      call nerdcommenter#SetUp()
-    endif
-  endif
-endfu
-
-fu! NERDCommenter_after()
-  if g:ft == 'svelte'
-    exec 'setf '.g:ft
-    if exists('b:NERDCommenterDelims')
-      unlet b:NERDCommenterDelims
-    endif
-    call nerdcommenter#SetUp()
-    let g:ft = ''
-  endif
-endfu
-
-" Prettier
-let g:prettier#quickfix_enabled = 0
-let g:prettier#autoformat_require_pragma = 0
-au BufWritePre *.css,*.svelte,*.pcss,*.html,*.ts,*.js,*.json PrettierAsync
-
-" - Web -
-let g:user_emmet_install_global=0
-augroup Emmet
-    autocmd!
-    autocmd Filetype html,css if exists('g:loaded_emmet_vim') |
-        \ EmmetInstall |
-        \ endif
-augroup END
-" let g:user_emmet_leader_key='<localleader>'
-
-" - Javascript -
-" Javascript configuration
-let g:javascript_enable_dom_htmlcss = 1
-
-" - Python -
-" Run in python using F9
-augroup Python
-    autocmd!
-    autocmd FileType python nnoremap <buffer> <F9> :exec '!python' shellescape(@%, 1)<cr>
-augroup END
-
-" Documentation
-let g:pymode_doc = 1
-let g:pymode_doc_key = 'K'
-
-" Linting
-let g:pymode_lint = 1
-let g:pymode_lint_checkers = ['pyflakes', 'pep8']
-let g:pymode_lint_message = 1
-
-" Auto check on save
-let g:pymode_lint_write = 1
-
-" Support virtualenv
-let g:pymode_virtualenv = 1
-
-" Enable breakpoints plugin
-let g:pymode_breakpoint = 1
-let g:pymode_breakpoint_bind = '<localleader>b'
-
-" Syntax highlighting
-let g:pymode_syntax = 1
-let g:pymode_syntax_all = 1
-let g:pymode_syntax_indent_errors = g:pymode_syntax_all
-let g:pymode_syntax_space_errors = g:pymode_syntax_all
-
-" Enable python folding
-let g:pymode_folding = 1
-
-" Enable pymode motion
-let g:pymode_motion = 1
-
-" Set up default python options
-let g:pymode_options = 1
-
-" Trim whitespace on save
-let g:pymode_trim_whitespaces = 1
-
-" PEP8-compatible python indent
-" let g:pymode_indent = 1
-
-" Rope support
-let g:pymode_rope = 0
-
-" [YELP] Ignore line too long
-let g:pymode_lint_ignore = "W503,E128"
-
-" - Rust -
-" Rust racer
-let g:racer_cmd = "~/dotfiles/racer/target/release/racer"
-" Must install Rust source to this location first
-let $RUST_SRC_PATH="/usr/local/src/rust/src/"
-" Rust folding
-let g:rust_fold = 2
-
-" - Processing -
-let g:processing_fold = 1
-
-" - Markdown -
-let g:livedown_open = 1
-]])

config/nvim/config/plugin.vimrc

@@ -73,8 +73,6 @@ let g:startify_custom_header = map(split(system('fortune -a -s | fmt -80 -s | co
 " Automatically open tagbar when entering supported buffer
 " autocmd BufEnter * nested :call tagbar#autoopen(0)
 
-" - Generative AI -
-
 " - Utility -
 " DelimitMate sane bracing
 let delimitMate_expand_cr = 1
@@ -175,6 +173,7 @@ let g:table_mode_map_prefix = '<Leader><Leader>t'
 
 " COC
 " let g:coc_node_path = '$HOME/.nvm/versions/node/v12.16.3/bin/node'
+let g:coc_disable_startup_warning = 1
 
 set updatetime=300
 set shortmess+=c " don't give |ins-completion-menu| messages.
@@ -323,4 +322,22 @@ let g:rust_fold = 2
 let g:processing_fold = 1
 
 " - Markdown -
+" Livedown
 let g:livedown_open = 1
+" Markdown Preview
+
+" --- AI ---
+" Claude Code
+" plugin/claudecode.lua auto-calls require('claudecode').setup(g:claudecode_auto_setup)
+" once the plugin loads (during plug#end() below), so this must be a plain
+" vimscript dict rather than a lua block -- see the guarded keymaps in
+" bindings.vimrc for the commands this enables.
+" Full option list: https://github.com/coder/claudecode.nvim#configuration-options
+let g:claudecode_auto_setup = {
+    \ 'terminal': {
+    \     'provider': 'snacks',
+    \     'split_side': 'right',
+    \     'split_width_percentage': 0.30,
+    \ },
+    \ }
+

config/nvim/ftplugin/python.lua

@@ -0,0 +1,4 @@
+vim.bo.textwidth = 79
+if vim.bo.modifiable then
+  vim.bo.fileformat = "unix"
+end

config/nvim/ftplugin/vimwiki.lua

@@ -0,0 +1,36 @@
+local map = function(mode, lhs, rhs)
+  vim.keymap.set(mode, lhs, rhs, { buffer = true })
+end
+
+map("n", "<leader>mm", "<Plug>VimwikiIndex")
+map("n", "<leader>mw", "<Plug>VimwikiUISelect")
+map("n", "<leader>mhelp", ":verbose map ,m<CR>")
+map("n", "<leader>mg", "<Plug>VimwikiGoto")
+map("n", "<leader>mf", "<Plug>VimwikiUISelect1<CR>")
+map("n", "<leader>m<Space>", "<Plug>VimwikiUISelect2<CR>")
+map("n", "<leader>mp", "<Plug>VimwikiUISelect3<CR>")
+map("n", "<leader>ms", "<Plug>VimwikiUISelect4<CR>")
+
+map("n", "<leader>m-", "<Plug>VimwikiSplitLink")
+map("n", "<leader>m<Bar>", "<Plug>VimwikiVSplitLink")
+
+map("n", "<leader>mnt", "<Plug>VimwikiNextTask")
+map("n", "<leader>mnl", "<Plug>VimwikiNextLink")
+map("n", "<leader>mNl", "<Plug>VimwikiPrevLink")
+
+map({ "n", "i", "v" }, "<Tab>", "<Plug>VimwikiIncreaseLvlSingleItem")
+map({ "n", "i", "v" }, "<S-Tab>", "<Plug>VimwikiDecreaseLvlSingleItem")
+
+map("i", "<C-Space>", "<Esc><Plug>VimwikiToggleListItemA")
+map("n", "<C-d><C-Space>", "<Plug>VimwikiRemoveSingleCB")
+map("i", "<C-d><C-Space>", "<Esc><Plug>VimwikiRemoveSingleCBa")
+map("n", "<leader>mb", "<Plug>VimwikiBackLinks")
+map("n", "<leader>mqtoc", "<Plug>VimwikiTOC")
+map("n", "<leader>mqgtl", "<Plug>VimwikiRebuildTags<CR><Plug>VimwikiGenerateTagLinks<CR>")
+
+map("v", "<leader>mk", 'c[]<Esc>Pea()<Esc>"+P')
+map("i", "<leader>mk", '<Esc>viW<C-k>ea')
+map("n", "<leader>mk", 'ciw[]<Esc>Pea()<Esc>"+P')
+
+map("n", "<leader>mag", ":ZettelOpen<CR>")
+map("n", "<leader>mat", ":ZettelOpen<CR>title:")

config/nvim/init.lua

@@ -1,19 +1,91 @@
-vim.cmd([[
-" -- Source config files
-source $HOME/.config/nvim/config/bindings-vimwiki.vimrc
-source $HOME/.config/nvim/config/init.vimrc
-source $HOME/.config/nvim/config/plugin.vimrc
-source $HOME/.config/nvim/config/general.vimrc
-source $HOME/.config/nvim/config/bindings.vimrc
-source $HOME/.config/nvim/config/functions.vimrc
+-- Version guard: native LSP config (vim.lsp.config/vim.lsp.enable, added in
+-- 0.11) and the pinned nvim-treesitter (hard-requires 0.12 in its own health
+-- check) both need a current Neovim. Older versions -- e.g. Debian's apt
+-- package, which lags upstream by a long way even fully updated -- don't
+-- fail here; they fail later with a confusing cascade of lspconfig and
+-- mason-lspconfig errors. Check up front instead, before anything else in
+-- this file runs (some of it, like vim.uv below, doesn't exist pre-0.10).
+if vim.fn.has("nvim-0.12") == 0 then
+  local ok, v = pcall(vim.version)
+  local current = ok and string.format("%d.%d.%d", v.major, v.minor, v.patch) or "an older version"
 
-" -- Python dependencies
-let g:python_host_prog = expand("~/.pyenv/versions/neovim2/bin/python")
-let g:python3_host_prog = expand("~/.pyenv/versions/neovim3/bin/python")
+  -- vim.loop (not vim.uv -- that alias doesn't exist pre-0.10) to detect the
+  -- machine's arch, since Neovim ships separate release assets per arch and
+  -- the install command below needs to name the right one.
+  local machine = (vim.loop.os_uname() or {}).machine or ""
+  local asset_arch = ({ x86_64 = "x86_64", amd64 = "x86_64", aarch64 = "arm64", arm64 = "arm64" })[machine]
 
-" -- Local overrides
-let $LOCALFILE=expand("$HOME/.nvim_local.vimrc")
-if filereadable($LOCALFILE)
-    source $LOCALFILE
-endif
-]])
+  if not asset_arch then
+    vim.api.nvim_echo({
+      {
+        "This config requires Neovim 0.12.0 or newer (found "
+          .. current
+          .. "). No prebuilt Neovim release is published for this machine's architecture ("
+          .. (machine ~= "" and machine or "unknown")
+          .. "); check https://github.com/neovim/neovim/releases/latest for a build, or install from source.\n",
+        "ErrorMsg",
+      },
+    }, true, {})
+    vim.fn.getchar()
+    os.exit(1)
+  end
+
+  local sysname = ((vim.loop.os_uname() or {}).sysname or ""):lower()
+  local is_mac = sysname == "darwin"
+  local asset = (is_mac and "nvim-macos-" or "nvim-linux-") .. asset_arch
+
+  local lines = {
+    { "This config requires Neovim 0.12.0 or newer (found " .. current .. ", " .. machine .. ").\n\n", "ErrorMsg" },
+    { "Install a current build into ~/.local (no root needed):\n", "None" },
+    { "  curl -LO https://github.com/neovim/neovim/releases/latest/download/" .. asset .. ".tar.gz\n", "None" },
+    { "  mkdir -p ~/.local && tar xzf " .. asset .. ".tar.gz --strip-components=1 -C ~/.local\n", "None" },
+    { "  rm " .. asset .. ".tar.gz\n", "None" },
+    { "  # then make sure ~/.local/bin is on your PATH\n\n", "Comment" },
+  }
+  if not is_mac then
+    vim.list_extend(lines, {
+      { "Or system-wide (needs root):\n", "None" },
+      { "  curl -LO https://github.com/neovim/neovim/releases/latest/download/" .. asset .. ".tar.gz\n", "None" },
+      { "  sudo mkdir -p /opt/nvim && sudo tar xzf " .. asset .. ".tar.gz --strip-components=1 -C /opt/nvim\n", "None" },
+      { "  sudo ln -sf /opt/nvim/bin/nvim /usr/local/bin/nvim\n", "None" },
+      { "  rm " .. asset .. ".tar.gz\n", "None" },
+    })
+  end
+  vim.api.nvim_echo(lines, true, {})
+  vim.fn.getchar()
+  os.exit(1)
+end
+
+-- Leader keys MUST be set before lazy.setup() so lazy-loaded `keys = {...}`
+-- specs resolve <leader> correctly when they register their keymaps.
+vim.g.mapleader = ","
+vim.g.maplocalleader = "\\"
+
+local lazypath = vim.fn.stdpath("data") .. "/lazy/lazy.nvim"
+if not vim.uv.fs_stat(lazypath) then
+  local out = vim.fn.system({
+    "git",
+    "clone",
+    "--filter=blob:none",
+    "https://github.com/folke/lazy.nvim.git",
+    "--branch=stable",
+    lazypath,
+  })
+  if vim.v.shell_error ~= 0 then
+    vim.api.nvim_echo({
+      { "Failed to clone lazy.nvim:\n", "ErrorMsg" },
+      { out, "WarningMsg" },
+    }, true, {})
+    vim.fn.getchar()
+    os.exit(1)
+  end
+end
+vim.opt.rtp:prepend(lazypath)
+
+require("config.options")
+require("config.keymaps")
+require("config.autocmds")
+
+require("lazy").setup("plugins", {
+  change_detection = { notify = false },
+})

config/nvim/lazy-lock.json

@@ -0,0 +1,47 @@
+{
+  "aerial.nvim": { "branch": "master", "commit": "28fe6e822ae344544c379d60fcb13c9519a1f08a" },
+  "alpha-nvim": { "branch": "main", "commit": "6c6a89d5b068b5251c8bdf0dd57bb921bcfeeb09" },
+  "blink.cmp": { "branch": "main", "commit": "78336bc89ee5365633bcf754d93df01678b5c08f" },
+  "blink.lib": { "branch": "main", "commit": "5876dd95deeb70aadbe9f1c0b7117a135061cdac" },
+  "bufferline.nvim": { "branch": "main", "commit": "655133c3b4c3e5e05ec549b9f8cc2894ac6f51b3" },
+  "claudecode.nvim": { "branch": "main", "commit": "2390c6e45c4789072c293ac69de051d169668b29" },
+  "conform.nvim": { "branch": "master", "commit": "619363c30309d29ffa631e67c8183f2a72caa373" },
+  "emmet-vim": { "branch": "master", "commit": "92ef2f74f4093edc99db5e9e4cf7e40116a85bd6" },
+  "flash.nvim": { "branch": "main", "commit": "fcea7ff883235d9024dc41e638f164a450c14ca2" },
+  "gitsigns.nvim": { "branch": "main", "commit": "eb60cc7b94c46005237fd34170d76f3a089a90aa" },
+  "gruvbox.nvim": { "branch": "main", "commit": "154eb5ff5b96d0641307113fa385eaf0d36d9796" },
+  "indent-blankline.nvim": { "branch": "master", "commit": "d28a3f70721c79e3c5f6693057ae929f3d9c0a03" },
+  "lazy.nvim": { "branch": "main", "commit": "85c7ff3711b730b4030d03144f6db6375044ae82" },
+  "lualine.nvim": { "branch": "master", "commit": "221ce6b2d999187044529f49da6554a92f740a96" },
+  "markdown-preview.nvim": { "branch": "master", "commit": "a923f5fc5ba36a3b17e289dc35dc17f66d0548ee" },
+  "mason-lspconfig.nvim": { "branch": "main", "commit": "47059d71b42d74b0a1e9f61c1d99d301039c3b5b" },
+  "mason.nvim": { "branch": "main", "commit": "2a6940af80375532e5e9e7c1f2fc6319a1b7a69d" },
+  "mini.align": { "branch": "main", "commit": "8cebe89d82f20e6d21b27346bcde4b4b6244a9f1" },
+  "mini.bufremove": { "branch": "main", "commit": "4cfbb201b2760da79ca6e1a00e9f67cbc99cbb8f" },
+  "neo-tree.nvim": { "branch": "v3.x", "commit": "ebd66767191714e008ce73b769518a763ff31bdc" },
+  "nui.nvim": { "branch": "main", "commit": "de740991c12411b663994b2860f1a4fd0937c130" },
+  "nvim-autopairs": { "branch": "master", "commit": "7b9923abad60b903ece7c52940e1321d39eccc79" },
+  "nvim-dap": { "branch": "master", "commit": "9e848e09a697ee95302a3ef2dd43fd6eb709e570" },
+  "nvim-dap-python": { "branch": "master", "commit": "1808458eba2b18f178f990e01376941a42c7f93b" },
+  "nvim-lint": { "branch": "master", "commit": "a219b2c9e5b4765e5c845aba119dad55806fcaf1" },
+  "nvim-lspconfig": { "branch": "master", "commit": "d224a1920728ba129880efc700d4a0180ac4ecbb" },
+  "nvim-surround": { "branch": "main", "commit": "8b47db616ef658b8fc27e61db2896aa2f40134de" },
+  "nvim-treesitter": { "branch": "main", "commit": "4916d6592ede8c07973490d9322f187e07dfefac" },
+  "nvim-treesitter-context": { "branch": "master", "commit": "b311b30818951d01f7b4bf650521b868b3fece16" },
+  "nvim-web-devicons": { "branch": "master", "commit": "dad71387de386a946b123079d0e53f23028f3abd" },
+  "persistence.nvim": { "branch": "main", "commit": "b20b2a7887bd39c1a356980b45e03250f3dce49c" },
+  "plenary.nvim": { "branch": "master", "commit": "74b06c6c75e4eeb3108ec01852001636d85a932b" },
+  "rainbow-delimiters.nvim": { "branch": "master", "commit": "a798325b7f36acc62741d1029930a7b96d4dd4bf" },
+  "rustaceanvim": { "branch": "main", "commit": "88575b98bb9937fb9983ddec5e532b67e75ce677" },
+  "snacks.nvim": { "branch": "main", "commit": "882c996cf28183f4d63640de0b4c02ec886d01f2" },
+  "telescope-fzf-native.nvim": { "branch": "main", "commit": "b25b749b9db64d375d782094e2b9dce53ad53a40" },
+  "telescope.nvim": { "branch": "master", "commit": "427b576c16792edad01a92b89721d923c19ad60f" },
+  "undotree": { "branch": "main", "commit": "02b69aed427b848c4dca483fc5e9524b6019c296" },
+  "vim-fugitive": { "branch": "master", "commit": "3b753cf8c6a4dcde6edee8827d464ba9b8c4a6f0" },
+  "vim-table-mode": { "branch": "master", "commit": "bb025308a45c67c7c8f0763ba37bc2ee3f534df0" },
+  "vim-tmux-navigator": { "branch": "master", "commit": "e41c431a0c7b7388ae7ba341f01a0d217eb3a432" },
+  "vim-visual-multi": { "branch": "master", "commit": "a6975e7c1ee157615bbc80fc25e4392f71c344d4" },
+  "vim-zettel": { "branch": "master", "commit": "554d16bf65b04ae86b92db08a44b4fbcbc31023f" },
+  "vimwiki": { "branch": "dev", "commit": "a54a3002e229c4b43d69ced170ff77663a5b2c40" },
+  "which-key.nvim": { "branch": "main", "commit": "3aab2147e74890957785941f0c1ad87d0a44c15a" }
+}

config/nvim/lua/config/autocmds.lua

@@ -0,0 +1,53 @@
+-- autoread (options.lua) only reloads a buffer once Vim checks the file's
+-- timestamp, which by default only happens on a handful of internal
+-- triggers. Force that check on focus/buffer-switch/idle so external edits
+-- (e.g. from claudecode.nvim) show up immediately instead of surfacing the
+-- stale-buffer prompt later.
+vim.api.nvim_create_autocmd({ "FocusGained", "BufEnter", "CursorHold", "CursorHoldI" }, {
+  group = vim.api.nvim_create_augroup("CheckTimeOnFocus", { clear = true }),
+  callback = function()
+    if vim.fn.getcmdwintype() == "" then
+      vim.cmd("checktime")
+    end
+  end,
+})
+
+local augroup = vim.api.nvim_create_augroup("EnterBuffer", { clear = true })
+
+vim.api.nvim_create_autocmd({ "BufNewFile", "BufReadPre", "FileReadPre", "BufEnter" }, {
+  group = augroup,
+  pattern = "Makefile",
+  callback = function()
+    vim.bo.expandtab = false
+    vim.bo.softtabstop = 0
+    vim.bo.shiftwidth = 8
+  end,
+})
+
+vim.api.nvim_create_autocmd({ "BufNewFile", "BufReadPre", "FileReadPre", "BufEnter" }, {
+  group = augroup,
+  pattern = { "*.asm", "*.S" },
+  callback = function()
+    vim.bo.softtabstop = 8
+    vim.bo.shiftwidth = 8
+  end,
+})
+
+-- dejima sets DEJIMA, never present on a normal host session, so this only
+-- fires inside the sandbox: open claudecode.nvim's terminal on startup
+-- rather than requiring <leader>ac, since starting a Claude session is the
+-- entire point of being in there.
+-- :ClaudeCode is defined by the plugin itself, so it doesn't exist until
+-- claudecode.nvim has actually loaded - it's lazy-loaded on the <leader>ac
+-- keymap only (no `cmd` in its lazy.nvim spec), so force that load first.
+if vim.env.DEJIMA then
+  vim.api.nvim_create_autocmd("VimEnter", {
+    once = true,
+    callback = function()
+      vim.schedule(function()
+        require("lazy").load({ plugins = { "claudecode.nvim" } })
+        vim.cmd("ClaudeCode")
+      end)
+    end,
+  })
+end

config/nvim/lua/config/keymaps.lua

@@ -0,0 +1,59 @@
+local map = vim.keymap.set
+
+-- Insert/command-mode escape via ,,
+map("i", ",,", "<Esc>", { desc = "Escape insert mode" })
+map("c", ",,", "<Esc><Esc>", { desc = "Escape command mode" })
+-- Terminal mode is a separate mode from Insert, so the above doesn't cover
+-- it (e.g. the Claude Code terminal). <C-\><C-n> is the real escape back to
+-- Normal mode there.
+map("t", ",,", "<C-\\><C-n>", { desc = "Escape terminal mode" })
+
+-- Move by display line, not physical line
+map("n", "j", "gj", { desc = "Move down by display line" })
+map("n", "k", "gk", { desc = "Move up by display line" })
+
+-- Clear search highlight
+map("n", "<leader><leader><Esc>", ":nohl<CR>", { desc = "Clear search highlight" })
+
+-- Hex mode
+map("n", "<leader>\\he", ":%!xxd<CR>", { desc = "Hex dump buffer" })
+map("n", "<leader>\\hd", ":%!xxd -r<CR>", { desc = "Undo hex dump" })
+
+-- Toggle whitespace display
+map("n", "<leader><leader>lw", ":set list!<CR>", { desc = "Toggle whitespace display" })
+-- List registers / marks
+map("n", "<leader><leader>lr", ":reg<CR>", { desc = "List registers" })
+map("n", "<leader><leader>lm", ":marks<CR>", { desc = "List marks" })
+
+-- Prev/next buffer
+map("n", "<leader>q", ":bp<CR>", { desc = "Previous buffer" })
+map("n", "<leader>w", ":bn<CR>", { desc = "Next buffer" })
+
+-- System clipboard
+map({ "n", "v" }, "<leader>y", '"+y', { desc = "Yank to system clipboard" })
+map({ "n", "v" }, "<leader>Y", '"+Y', { desc = "Yank line to system clipboard" })
+map({ "n", "v" }, "<leader>p", '"+p', { desc = "Paste from system clipboard" })
+map({ "n", "v" }, "<leader>P", '"+P', { desc = "Paste before from system clipboard" })
+map({ "n", "v" }, "<leader>x", '"+x', { desc = "Cut to system clipboard" })
+map("n", "<leader>dd", '"+dd', { desc = "Delete line to system clipboard" })
+
+-- Make split
+map("n", "<leader>-", ":sp<Space>", { desc = "Horizontal split" })
+map("n", "<leader><Bar>", ":vsp<Space>", { desc = "Vertical split" })
+
+-- Open init.lua
+map("n", "<leader>v", ":e $MYVIMRC<CR>", { desc = "Edit init.lua" })
+
+-- Low-light / daylight mode
+map("n", "<leader><leader>ll", ":set background=dark<CR>", { desc = "Dark background" })
+map("n", "<leader><leader>LL", ":set background=light<CR>", { desc = "Light background" })
+
+-- Ranger / trailing whitespace utilities
+map("n", "<leader>ra", function() require("util").ranger() end, { desc = "Open ranger" })
+map("n", "<leader>rw", function() require("util").delete_trailing_ws() end, { desc = "Delete trailing whitespace" })
+
+-- Terminal-mode Ctrl-Z otherwise goes straight to the embedded process (e.g.
+-- suspending the claude CLI inside claudecode.nvim's terminal with no way to
+-- fg it back) instead of suspending Neovim itself, like Ctrl-Z does by
+-- default in Normal mode.
+map("t", "<C-z>", "<C-\\><C-n><C-z>", { desc = "Suspend Neovim" })

config/nvim/lua/config/options.lua

@@ -0,0 +1,94 @@
+local opt = vim.opt
+
+-- Completion / buffers
+opt.omnifunc = "syntaxcomplete#Complete"
+opt.hidden = true
+opt.autoread = true
+
+-- No swap/backup files
+opt.swapfile = false
+opt.backup = false
+
+opt.number = true
+
+-- matchit is built into Neovim's runtime already; no `runtime macros/matchit.vim` needed
+
+opt.encoding = "utf-8"
+opt.lazyredraw = true
+opt.backspace = { "indent", "eol", "start" }
+opt.history = 700
+opt.incsearch = true
+opt.ignorecase = true
+opt.smartcase = true
+opt.scrolloff = 15
+
+opt.wildmode = { "longest", "list", "full" }
+opt.wildmenu = true
+opt.wildcharm = vim.api.nvim_replace_termcodes("<C-Z>", true, true, true):byte()
+
+opt.mouse = "a"
+
+-- Tabs
+opt.tabstop = 4
+opt.softtabstop = 4
+opt.expandtab = true
+opt.shiftwidth = 4
+
+opt.wrap = true
+opt.linebreak = true
+opt.list = false
+
+opt.ruler = true
+opt.showmatch = true
+
+opt.viewoptions:remove("options")
+
+opt.shortmess:append("I")
+
+opt.laststatus = 2
+opt.showmode = false
+
+opt.termguicolors = true
+vim.g.enable_bold_font = 1
+
+-- Have vrm extend background color to full terminal screen
+vim.cmd("set t_ut=")
+
+opt.splitbelow = true
+opt.splitright = true
+
+opt.updatetime = 300
+opt.shortmess:append("c")
+
+-- Clipboard: copy-only, via dotfiles/bin/clipboard-copy. This is a small
+-- script (rather than nvim's built-in raw-OSC-52-only provider) because
+-- reaching the real clipboard needs more than a raw OSC 52 write: it picks
+-- pbcopy/xclip/wl-copy when nvim is running locally, and when none of those
+-- are available (nvim on a remote host with no local display) sends a
+-- single plain OSC 52 write. Any tmux hops between here and the real
+-- terminal relay that onward themselves via the pane-set-clipboard hook in
+-- tmux.conf, so this works whether nvim is local or several ssh/tmux hops
+-- deep, on any machine sharing this dotfiles repo, without needing to know
+-- how many hops there are. Paste is intentionally left as a no-op: OSC 52
+-- read support is inconsistent across terminals and can hang waiting for a
+-- reply, so use the terminal's own native paste (e.g. Ctrl-Shift-V)
+-- instead. Guarded on executable() rather than assumed present - not every
+-- machine this config runs on has the rest of dotfiles checked out too
+-- (e.g. dejima mounts in only this nvim config directory), and
+-- without the guard vim.g.clipboard would point at a script that isn't
+-- there, erroring on every yank instead of just falling back to nvim's
+-- default clipboard handling.
+local clipboard_copy = vim.fn.expand("~/dotfiles/bin/clipboard-copy")
+if vim.fn.executable(clipboard_copy) == 1 then
+  vim.g.clipboard = {
+    name = "clipboard-copy (copy-only)",
+    copy = {
+      ["+"] = { clipboard_copy },
+      ["*"] = { clipboard_copy },
+    },
+    paste = {
+      ["+"] = function() return {} end,
+      ["*"] = function() return {} end,
+    },
+  }
+end

config/nvim/lua/plugins/ai.lua

@@ -0,0 +1,104 @@
+return {
+  { "folke/snacks.nvim", lazy = false },
+
+  {
+    "coder/claudecode.nvim",
+    dependencies = { "folke/snacks.nvim" },
+    opts = {
+      terminal = {
+        provider = "snacks",
+        split_side = "right",
+        split_width_percentage = 0.30,
+        -- snacks.nvim's terminal style binds a double-<Esc>-within-200ms
+        -- shortcut (term_normal) that silently drops the buffer out of
+        -- terminal-mode into Neovim's own Normal mode -- swallowing the
+        -- second Esc instead of forwarding it to the claude CLI, which uses
+        -- double-Esc itself (e.g. to rewind/interrupt). Once stuck in Normal
+        -- mode there (invisible, since showmode is off), the next keystroke
+        -- meant for the CLI -- e.g. Ctrl-O to toggle expanded tool output --
+        -- is instead consumed by Neovim's built-in Normal-mode <C-o> (jump
+        -- to older jumplist position), yanking focus to a different window.
+        -- Disabling this shortcut makes every Esc pass through raw to the
+        -- CLI; ,, (config/keymaps.lua) remains the deliberate way to reach
+        -- Normal mode in this terminal.
+        snacks_win_opts = {
+          keys = {
+            term_normal = false,
+            -- Per :help terminal-mode, when the running program hasn't enabled
+            -- its own mouse reporting (the claude CLI doesn't), any mouse event
+            -- over the terminal -- including the scroll wheel -- drops terminal
+            -- focus to Neovim's Normal mode instead of being forwarded, leaving
+            -- you stuck there (invisibly, since showmode is off) until you press
+            -- 'i' again -- and clicks meant for the CLI (e.g. approval prompts)
+            -- land as buffer-cursor movement in the meantime. Intercept the
+            -- wheel so it scrolls the window and silently returns to terminal
+            -- mode, instead of leaving that to the default behavior.
+            scroll_up = {
+              "<ScrollWheelUp>",
+              "<C-\\><C-n><ScrollWheelUp>i",
+              mode = "t",
+              desc = "Scroll up without leaving terminal mode",
+            },
+            scroll_down = {
+              "<ScrollWheelDown>",
+              "<C-\\><C-n><ScrollWheelDown>i",
+              mode = "t",
+              desc = "Scroll down without leaving terminal mode",
+            },
+          },
+        },
+      },
+      diff_opts = {
+        keep_terminal_focus = true,
+        -- Unified (single-buffer, VS Code-style) diff instead of side-by-side
+        -- splits: it only ever opens one new window, so it can't add a second
+        -- split and squish the rest of the layout the way the side-by-side
+        -- diff sometimes did.
+        layout = "unified",
+      },
+    },
+    config = function(_, opts)
+      require("claudecode").setup(opts)
+
+      -- claudecode picks a window for the diff by scanning all windows for the
+      -- first non-sidebar/non-terminal one, not the one you're actually
+      -- focused on, so the diff could land away from your active pane. Prefer
+      -- the current window when it's a normal editing window.
+      local diff = require("claudecode.diff")
+      local default_find_main_editor_window = diff._find_main_editor_window
+      diff._find_main_editor_window = function()
+        local win = vim.api.nvim_get_current_win()
+        local buf = vim.api.nvim_win_get_buf(win)
+        local buftype = vim.api.nvim_buf_get_option(buf, "buftype")
+        local win_config = vim.api.nvim_win_get_config(win)
+        local is_floating = win_config.relative and win_config.relative ~= ""
+        local is_diff_win = vim.api.nvim_win_get_option(win, "diff")
+        if not is_floating and not is_diff_win and buftype ~= "terminal" and buftype ~= "prompt" then
+          return win
+        end
+        return default_find_main_editor_window()
+      end
+
+      -- claudecode's unified diff buffers pick up treesitter's foldexpr via
+      -- the normal FileType autocmd, so they otherwise inherit the global
+      -- foldlevelstart and open partially collapsed. Fully expand folds in
+      -- these specifically instead of changing the default for all buffers.
+      vim.api.nvim_create_autocmd("BufWinEnter", {
+        group = vim.api.nvim_create_augroup("ClaudeCodeDiffUnfold", { clear = true }),
+        callback = function(args)
+          if vim.b[args.buf].claudecode_inline_diff then
+            vim.wo.foldlevel = 99
+          end
+        end,
+      })
+    end,
+    keys = {
+      { "<leader>ac", "<cmd>ClaudeCode<CR>", desc = "Toggle Claude Code" },
+      { "<leader>af", "<cmd>ClaudeCodeFocus<CR>", desc = "Focus Claude Code" },
+      { "<leader>ab", "<cmd>ClaudeCodeAdd %<CR>", desc = "Add buffer to Claude Code" },
+      { "<leader>as", "<cmd>ClaudeCodeSend<CR>", mode = "v", desc = "Send selection to Claude Code" },
+      { "<leader>aa", "<cmd>ClaudeCodeDiffAccept<CR>", desc = "Accept Claude Code diff" },
+      { "<leader>ad", "<cmd>ClaudeCodeDiffDeny<CR>", desc = "Deny Claude Code diff" },
+    },
+  },
+}

config/nvim/lua/plugins/completion.lua

@@ -0,0 +1,10 @@
+return {
+  "saghen/blink.cmp",
+  version = "*",
+  opts = {
+    keymap = { preset = "default" },
+    appearance = { nerd_font_variant = "mono" },
+    completion = { documentation = { auto_show = true } },
+    sources = { default = { "lsp", "path", "buffer" } },
+  },
+}

config/nvim/lua/plugins/dap.lua

@@ -0,0 +1,33 @@
+return {
+  {
+    "mfussenegger/nvim-dap",
+    keys = {
+      { "<leader>db", function() require("dap").toggle_breakpoint() end, desc = "Toggle breakpoint" },
+      { "<leader>dc", function() require("dap").continue() end, desc = "Debug: continue" },
+      { "<leader>di", function() require("dap").step_into() end, desc = "Debug: step into" },
+      { "<leader>do", function() require("dap").step_over() end, desc = "Debug: step over" },
+      { "<leader>dO", function() require("dap").step_out() end, desc = "Debug: step out" },
+      { "<leader>dr", function() require("dap").repl.toggle() end, desc = "Debug: toggle REPL" },
+      { "<leader>dq", function() require("dap").terminate() end, desc = "Debug: terminate" },
+    },
+  },
+  {
+    -- Configures nvim-dap for Python using debugpy, installed via Mason
+    -- (:MasonInstall debugpy) so it lives in an isolated venv rather than
+    -- needing debugpy in every project's own environment.
+    "mfussenegger/nvim-dap-python",
+    dependencies = { "mfussenegger/nvim-dap" },
+    ft = "python",
+    config = function()
+      local python = vim.fn.stdpath("data") .. "/mason/packages/debugpy/venv/bin/python"
+      if vim.fn.executable(python) == 0 then
+        vim.notify(
+          "debugpy not installed: run :MasonInstall debugpy to enable Python debugging",
+          vim.log.levels.WARN
+        )
+        return
+      end
+      require("dap-python").setup(python)
+    end,
+  },
+}

config/nvim/lua/plugins/editor.lua

@@ -0,0 +1,137 @@
+return {
+  {
+    "nvim-neo-tree/neo-tree.nvim",
+    branch = "v3.x",
+    dependencies = {
+      "nvim-lua/plenary.nvim",
+      "nvim-tree/nvim-web-devicons",
+      "MunifTanjim/nui.nvim",
+    },
+    keys = {
+      { "<leader>t", ":Neotree toggle<CR>", desc = "Toggle file explorer" },
+      {
+        "<leader>cd",
+        function()
+          vim.cmd("cd " .. vim.fn.fnameescape(vim.fn.expand("%:p:h")))
+          vim.cmd("pwd")
+          vim.cmd("Neotree dir=" .. vim.fn.fnameescape(vim.fn.getcwd()))
+        end,
+        desc = "cd to current file's directory and open explorer",
+      },
+    },
+    opts = {},
+  },
+
+  {
+    "nvim-telescope/telescope.nvim",
+    dependencies = {
+      "nvim-lua/plenary.nvim",
+      { "nvim-telescope/telescope-fzf-native.nvim", build = "make" },
+    },
+    cmd = "Telescope",
+    keys = {
+      { "<leader>.", "<cmd>Telescope lsp_document_symbols<CR>", desc = "Jump to symbol" },
+      { "<leader>;", "<cmd>Telescope buffers<CR>", desc = "Jump to buffer" },
+      {
+        "<leader>be",
+        "<cmd>Telescope buffers sort_mru=true ignore_current_buffer=true<CR>",
+        desc = "Jump to buffer (MRU)",
+      },
+      { "<leader>ag", "<cmd>Telescope live_grep<CR>", desc = "Grep" },
+      { "<leader>?", "<cmd>Telescope keymaps<CR>", desc = "Search keybindings" },
+    },
+    config = function()
+      local telescope = require("telescope")
+      telescope.setup({})
+      telescope.load_extension("fzf")
+    end,
+  },
+
+  {
+    "folke/flash.nvim",
+    event = "VeryLazy",
+    opts = {},
+    keys = {
+      { "<leader>/", function() require("flash").jump() end, mode = { "n", "x", "o" }, desc = "Flash jump" },
+      { "<leader>s", function() require("flash").jump({ search = { mode = "search" } }) end, mode = { "n", "x", "o" }, desc = "Flash search jump" },
+      { "<leader><leader>s", function() require("flash").treesitter() end, mode = { "n", "x", "o" }, desc = "Flash treesitter" },
+      { "<leader>f", function() require("flash").jump({ search = { forward = true, wrap = false } }) end, mode = { "n", "x", "o" }, desc = "Flash forward" },
+    },
+  },
+
+  { "kylechui/nvim-surround", event = { "BufReadPost", "BufNewFile" }, opts = {} },
+  { "windwp/nvim-autopairs", event = "InsertEnter", opts = {} },
+
+  {
+    "nvim-treesitter/nvim-treesitter-context",
+    event = { "BufReadPost", "BufNewFile" },
+    dependencies = { "nvim-treesitter/nvim-treesitter" },
+    opts = {},
+  },
+
+  {
+    "echasnovski/mini.align",
+    version = "*",
+    keys = {
+      { "ga=", mode = { "n", "x" }, desc = "Align on =" },
+      { "ga:", mode = { "n", "x" }, desc = "Align on :" },
+    },
+    config = function()
+      require("mini.align").setup({
+        mappings = { start = "ga", start_with_preview = "" },
+      })
+    end,
+  },
+
+  { "echasnovski/mini.bufremove", version = "*", keys = {
+    { "<leader><leader>c", function() require("mini.bufremove").delete(0, false) end, desc = "Close buffer" },
+  } },
+
+  {
+    "mg979/vim-visual-multi",
+    branch = "master",
+    keys = { "<C-n>" },
+    init = function()
+      vim.g.VM_maps = {
+        ["Find Under"] = "<C-n>",
+        ["Find Subword Under"] = "<C-n>",
+      }
+    end,
+  },
+
+  {
+    "christoomey/vim-tmux-navigator",
+    lazy = false,
+    -- Plugin's own default mappings rely on a Vim-only <C-w> terminal escape
+    -- that Neovim doesn't support, so :terminal buffers (e.g. claudecode.nvim)
+    -- leak the raw keystrokes to the embedded process. Disable them and
+    -- define our own, using Neovim's actual terminal-mode escape.
+    init = function()
+      vim.g.tmux_navigator_no_mappings = 1
+    end,
+    keys = {
+      { "<C-h>", "<cmd>TmuxNavigateLeft<CR>" },
+      { "<C-j>", "<cmd>TmuxNavigateDown<CR>" },
+      { "<C-k>", "<cmd>TmuxNavigateUp<CR>" },
+      { "<C-l>", "<cmd>TmuxNavigateRight<CR>" },
+      { "<C-h>", "<C-\\><C-n><cmd>TmuxNavigateLeft<CR>", mode = "t" },
+      { "<C-j>", "<C-\\><C-n><cmd>TmuxNavigateDown<CR>", mode = "t" },
+      { "<C-k>", "<C-\\><C-n><cmd>TmuxNavigateUp<CR>", mode = "t" },
+      { "<C-l>", "<C-\\><C-n><cmd>TmuxNavigateRight<CR>", mode = "t" },
+    },
+  },
+
+  {
+    "mattn/emmet-vim",
+    ft = { "html", "css" },
+    init = function()
+      vim.g.user_emmet_install_global = 0
+    end,
+    config = function()
+      vim.api.nvim_create_autocmd("FileType", {
+        pattern = { "html", "css" },
+        callback = function() vim.cmd("EmmetInstall") end,
+      })
+    end,
+  },
+}

config/nvim/lua/plugins/format.lua

@@ -0,0 +1,55 @@
+return {
+  {
+    "stevearc/conform.nvim",
+    event = { "BufWritePre" },
+    cmd = { "ConformInfo" },
+    opts = {
+      formatters_by_ft = {
+        css = { "prettier" },
+        svelte = { "prettier" },
+        pcss = { "prettier" },
+        html = { "prettier" },
+        typescript = { "prettier" },
+        typescriptreact = { "prettier" },
+        javascript = { "prettier" },
+        javascriptreact = { "prettier" },
+        json = { "prettier" },
+        yaml = { "prettier" },
+        markdown = { "prettier" },
+        python = { "ruff_format" },
+        rust = { "rustfmt" },
+        lua = { "stylua" },
+      },
+      format_on_save = {
+        lsp_format = "fallback",
+        timeout_ms = 2000,
+      },
+    },
+  },
+
+  {
+    "mfussenegger/nvim-lint",
+    event = { "BufWritePost", "BufReadPost", "InsertLeave" },
+    config = function()
+      require("lint").linters_by_ft = {
+        javascript = { "eslint_d" },
+        typescript = { "eslint_d" },
+        javascriptreact = { "eslint_d" },
+        typescriptreact = { "eslint_d" },
+        svelte = { "eslint_d" },
+      }
+
+      if vim.fn.executable("shellcheck") == 1 then
+        require("lint").linters_by_ft.sh = { "shellcheck" }
+      else
+        vim.notify("shellcheck not found: skipping shell linting", vim.log.levels.WARN)
+      end
+
+      vim.api.nvim_create_autocmd({ "BufWritePost", "BufReadPost", "InsertLeave" }, {
+        callback = function()
+          require("lint").try_lint()
+        end,
+      })
+    end,
+  },
+}

config/nvim/lua/plugins/git.lua

@@ -0,0 +1,4 @@
+return {
+  { "lewis6991/gitsigns.nvim", event = { "BufReadPre", "BufNewFile" }, opts = {} },
+  { "tpope/vim-fugitive", cmd = { "Git", "Gdiffsplit", "Gvdiffsplit", "Gread", "Gwrite", "Gclog" } },
+}

config/nvim/lua/plugins/lsp.lua

@@ -0,0 +1,59 @@
+local servers = { "basedpyright", "ruff" }
+
+local npm_servers = { "ts_ls", "svelte", "html", "cssls", "bashls" }
+local function has_public_npm()
+  if vim.fn.executable("npm") ~= 1 then
+    return false
+  end
+  local result = vim.fn.system("npm config get registry")
+  return result:find("registry.npmjs.org") ~= nil
+end
+
+if has_public_npm() then
+  vim.list_extend(servers, npm_servers)
+else
+  vim.notify(
+    "public npm registry unavailable: skipping LSP servers " .. table.concat(npm_servers, ", "),
+    vim.log.levels.WARN
+  )
+end
+
+return {
+  {
+    "mason-org/mason.nvim",
+    opts = {},
+  },
+  {
+    "mason-org/mason-lspconfig.nvim",
+    dependencies = { "mason-org/mason.nvim" },
+    opts = {
+      ensure_installed = servers,
+    },
+  },
+  {
+    "neovim/nvim-lspconfig",
+    dependencies = { "mason-org/mason-lspconfig.nvim", "saghen/blink.cmp", "saghen/blink.lib" },
+    config = function()
+      local capabilities = require("blink.cmp").get_lsp_capabilities()
+
+      vim.api.nvim_create_autocmd("LspAttach", {
+        group = vim.api.nvim_create_augroup("LspKeymaps", { clear = true }),
+        callback = function(args)
+          local opts = { buffer = args.buf }
+          vim.keymap.set("n", "K", vim.lsp.buf.hover, opts)
+          vim.keymap.set("n", "gd", vim.lsp.buf.definition, opts)
+          vim.keymap.set("n", "gy", vim.lsp.buf.type_definition, opts)
+          vim.keymap.set("n", "gi", vim.lsp.buf.implementation, opts)
+          vim.keymap.set("n", "gr", vim.lsp.buf.references, opts)
+          vim.keymap.set("n", "rn", vim.lsp.buf.rename, opts)
+          vim.keymap.set("v", "ff", function() vim.lsp.buf.format({ async = true }) end, opts)
+        end,
+      })
+
+      for _, server in ipairs(servers) do
+        vim.lsp.config(server, { capabilities = capabilities })
+        vim.lsp.enable(server)
+      end
+    end,
+  },
+}

config/nvim/lua/plugins/misc.lua

@@ -0,0 +1,31 @@
+return {
+  {
+    "stevearc/aerial.nvim",
+    dependencies = { "nvim-treesitter/nvim-treesitter", "nvim-tree/nvim-web-devicons" },
+    keys = {
+      { "<leader>ct", "<cmd>AerialToggle<CR>", desc = "Toggle symbol outline" },
+    },
+    opts = {},
+  },
+
+  {
+    "jiaoshijie/undotree",
+    dependencies = { "nvim-lua/plenary.nvim" },
+    keys = {
+      { "<leader>u", function() require("undotree").toggle() end, desc = "Toggle undo tree" },
+    },
+    opts = {},
+  },
+
+  {
+    "folke/persistence.nvim",
+    event = "BufReadPre",
+    opts = {},
+  },
+
+  {
+    "folke/which-key.nvim",
+    event = "VeryLazy",
+    opts = {},
+  },
+}

config/nvim/lua/plugins/rust.lua

@@ -0,0 +1,25 @@
+return {
+  {
+    "mrcjkb/rustaceanvim",
+    version = "^6",
+    lazy = false,
+    init = function()
+      vim.g.rustaceanvim = {
+        tools = {},
+        server = {
+          on_attach = function(_, bufnr)
+            vim.keymap.set("n", "<localleader>rr", function()
+              vim.cmd.RustLsp("run")
+            end, { buffer = bufnr })
+          end,
+        },
+      }
+    end,
+  },
+  {
+    "mason-org/mason-lspconfig.nvim",
+    opts = {
+      automatic_enable = { exclude = { "rust_analyzer" } },
+    },
+  },
+}

config/nvim/lua/plugins/treesitter.lua

@@ -0,0 +1,100 @@
+return {
+  "nvim-treesitter/nvim-treesitter",
+  lazy = false,
+  build = ":TSUpdate",
+  config = function()
+    local parsers = {
+      "javascript",
+      "typescript",
+      "tsx",
+      "svelte",
+      "html",
+      "css",
+      "scss",
+      "json",
+      "yaml",
+      "python",
+      "rust",
+      "bash",
+      "lua",
+      "vim",
+      "vimdoc",
+      "query",
+      "markdown",
+      "markdown_inline",
+      "regex",
+    }
+
+    -- Install parsers (skip if the tree-sitter CLI isn't available; parsers
+    -- already cached from a previous run on this machine still work fine)
+    if vim.fn.executable("tree-sitter") == 1 then
+      require("nvim-treesitter").install(parsers)
+    else
+      local uname = vim.uv.os_uname()
+      local sysname = (uname.sysname or ""):lower()
+      local machine = uname.machine or ""
+      local is_mac = sysname == "darwin"
+
+      local install_cmd
+      if is_mac then
+        local arch_part = ({ x86_64 = "x64", amd64 = "x64", aarch64 = "arm64", arm64 = "arm64" })[machine] or "x64"
+        local asset = "tree-sitter-macos-" .. arch_part
+        install_cmd = "  curl -L https://github.com/tree-sitter/tree-sitter/releases/latest/download/"
+          .. asset
+          .. ".gz | gunzip > ~/.local/bin/tree-sitter && chmod +x ~/.local/bin/tree-sitter"
+      else
+        install_cmd = "  cargo install --root ~/.local tree-sitter-cli"
+      end
+
+      vim.notify(
+        "tree-sitter CLI not found: skipping install of missing parsers.\n"
+          .. "Install into ~/.local/bin:\n"
+          .. install_cmd,
+        vim.log.levels.WARN
+      )
+    end
+
+    -- Enable treesitter highlighting, folding, and indentation for
+    -- filetypes with an installed parser. Note some filetype names differ
+    -- from their parser names (e.g. "bash" parser -> "sh" filetype).
+    vim.api.nvim_create_autocmd("FileType", {
+      pattern = {
+        "javascript",
+        "typescript",
+        "typescriptreact",
+        "javascriptreact",
+        "svelte",
+        "html",
+        "css",
+        "scss",
+        "json",
+        "yaml",
+        "python",
+        "rust",
+        "sh",
+        "lua",
+        "vim",
+        "help",
+        "query",
+        "markdown",
+      },
+      callback = function()
+        -- Highlighting, provided by Neovim. Falls back to Vim's legacy
+        -- syntax/indent if no parser is installed for this filetype.
+        if not pcall(vim.treesitter.start) then
+          return
+        end
+        -- Folding, provided by Neovim
+        vim.wo.foldexpr = "v:lua.vim.treesitter.foldexpr()"
+        vim.wo.foldmethod = "expr"
+        -- Indentation, provided by nvim-treesitter
+        vim.bo.indentexpr = "v:lua.require'nvim-treesitter'.indentexpr()"
+      end,
+    })
+
+    -- General fold display settings (not treesitter-specific)
+    vim.opt.foldlevel = 2
+    vim.opt.foldlevelstart = 2
+    vim.opt.foldcolumn = "5"
+  end,
+}

config/nvim/lua/plugins/ui.lua

@@ -0,0 +1,101 @@
+return {
+  {
+    "ellisonleao/gruvbox.nvim",
+    priority = 1000,
+    opts = {
+      italic = { strings = true, comments = true, operators = false, folds = true },
+      invert_selection = true,
+      invert_signs = false,
+    },
+    config = function(_, opts)
+      require("gruvbox").setup(opts)
+      vim.o.background = "dark"
+      local ok = pcall(vim.cmd.colorscheme, "gruvbox")
+      if not ok then
+        vim.cmd.colorscheme("desert")
+      end
+    end,
+  },
+
+  {
+    "nvim-lualine/lualine.nvim",
+    dependencies = { "nvim-tree/nvim-web-devicons" },
+    event = "VeryLazy",
+    opts = {
+      options = { theme = "gruvbox" },
+    },
+  },
+
+  {
+    "akinsho/bufferline.nvim",
+    dependencies = { "nvim-tree/nvim-web-devicons" },
+    event = "VeryLazy",
+    opts = {},
+  },
+
+  {
+    "lukas-reineke/indent-blankline.nvim",
+    main = "ibl",
+    event = { "BufReadPost", "BufNewFile" },
+    opts = {},
+  },
+
+  {
+    "HiPhish/rainbow-delimiters.nvim",
+    event = { "BufReadPost", "BufNewFile" },
+  },
+
+  { "nvim-tree/nvim-web-devicons", opts = {} },
+
+  {
+    "goolord/alpha-nvim",
+    dependencies = { "nvim-tree/nvim-web-devicons" },
+    event = "VimEnter",
+    config = function()
+      local alpha = require("alpha")
+      local dashboard = require("alpha.themes.dashboard")
+
+      local function fortune_header()
+        -- cowsay -l prints a header line, then wraps every cow name across
+        -- several space-separated lines (not one name per line), so a name
+        -- has to be picked from all of them split on whitespace, not by
+        -- treating a whole (possibly multi-name) line as one name.
+        local raw = vim.fn.systemlist("cowsay -l")
+        local cow = "default"
+        local names = {}
+        for i = 2, #raw do
+          for name in raw[i]:gmatch("%S+") do
+            table.insert(names, name)
+          end
+        end
+        if #names > 0 then
+          cow = names[math.random(#names)]
+        end
+        local moods = { "b", "d", "g", "p", "s", "t", "w", "y" }
+        local mood = moods[math.random(#moods)]
+        local cmd = string.format(
+          "fortune -a -s | fmt -80 -s | cowthink -%s -f %s -n",
+          mood,
+          cow
+        )
+        local ok, lines = pcall(vim.fn.systemlist, cmd)
+        if not ok or #lines == 0 then
+          return { "Welcome to Neovim" }
+        end
+        return lines
+      end
+
+      dashboard.section.header.val = fortune_header()
+      dashboard.section.buttons.val = {
+        dashboard.button("e", "  New file", ":enew<CR>"),
+        dashboard.button("f", "  Find file", ":Telescope find_files<CR>"),
+        dashboard.button("g", "  Live grep", ":Telescope live_grep<CR>"),
+        dashboard.button("s", "  Restore session", ":lua require('persistence').load()<CR>"),
+        dashboard.button("q", "  Quit", ":qa<CR>"),
+      }
+      alpha.setup(dashboard.opts)
+
+      vim.keymap.set("n", "<leader><leader>o", ":Alpha<CR>")
+    end,
+  },
+}

config/nvim/lua/plugins/vimwiki.lua

@@ -0,0 +1,64 @@
+vim.g.vimwiki_list = {
+  {
+    path = "~/synced-notebooks/bradwiki/",
+    syntax = "markdown",
+    ext = ".md",
+    diary_rel_path = "daily_notes/",
+    diary_index = "index",
+    diary_header = "Daily Notes",
+    auto_tags = 1,
+    auto_diary_index = 1,
+    auto_generate_links = 1,
+    auto_generate_tags = 1,
+  },
+  {
+    path = "~/synced-notebooks/work_notebook/",
+    syntax = "markdown",
+    ext = ".md",
+    diary_rel_path = "daily_notes/",
+    diary_index = "index",
+    diary_header = "Daily Notes",
+    auto_tags = 1,
+    auto_diary_index = 1,
+    auto_generate_links = 1,
+    auto_generate_tags = 1,
+  },
+  { path = "~/synced-notebooks/privatewiki/", syntax = "markdown", ext = ".md" },
+  { path = "~/synced-notebooks/sharedwiki/", syntax = "markdown", ext = ".md" },
+}
+vim.g.vimwiki_map_prefix = "<Leader>m"
+vim.g.vimwiki_folding = "list"
+vim.g.markdown_folding = 1
+
+vim.g.zettel_options = {
+  {},
+  {
+    front_matter = { { "tags", "" }, { "type", "note" } },
+    template = "~/work_notebook/templates/daily_note.tpl",
+  },
+}
+
+vim.g.table_mode_map_prefix = "<Leader><Leader>t"
+
+vim.api.nvim_create_autocmd("FileType", {
+  group = vim.api.nvim_create_augroup("VimwikiFiletype", { clear = true }),
+  pattern = "vimwiki",
+  callback = function()
+    vim.opt_local.breakindent = true
+    vim.opt_local.breakindentopt = "shift:2"
+  end,
+})
+
+return {
+  { "vimwiki/vimwiki", lazy = false },
+  { "michal-h21/vim-zettel", dependencies = { "vimwiki/vimwiki" }, lazy = false },
+  { "dhruvasagar/vim-table-mode", cmd = "TableModeToggle" },
+  {
+    "iamcco/markdown-preview.nvim",
+    build = function() vim.fn["mkdp#util#install"]() end,
+    ft = { "markdown", "vimwiki" },
+    keys = {
+      { "<localleader>v", "<Plug>MarkdownPreviewToggle", ft = { "markdown", "vimwiki" }, desc = "Toggle markdown preview" },
+    },
+  },
+}

config/nvim/lua/util.lua

@@ -0,0 +1,28 @@
+local M = {}
+
+-- Open ranger from within nvim; if it writes a chosen path to its return
+-- file, open that file. Mirrors the old vimscript Ranger() function.
+function M.ranger()
+  if vim.fn.executable("ranger") == 0 then
+    vim.notify("ranger is not installed", vim.log.levels.WARN)
+    return
+  end
+  local tmpfile = vim.fn.system("mktemp -u"):gsub("\n", "")
+  vim.cmd(("silent !RANGER_RETURN_FILE=%s ranger"):format(tmpfile))
+  if vim.fn.filereadable(tmpfile) == 1 then
+    local filetoedit = vim.fn.system("cat " .. tmpfile)
+    vim.cmd("edit " .. filetoedit)
+    vim.fn.delete(tmpfile)
+  end
+  vim.cmd("redraw!")
+end
+
+-- Delete trailing whitespace on the current buffer, preserving cursor
+-- position. Mirrors the old vimscript DeleteTrailingWS() function.
+function M.delete_trailing_ws()
+  local view = vim.fn.winsaveview()
+  vim.cmd([[silent! %s/\s\+$//ge]])
+  vim.fn.winrestview(view)
+end
+
+return M

config/picom.conf

@@ -22,7 +22,6 @@ shadow-exclude = [
         "class_g = 'lattedock'",
          "_GTK_FRAME_EXTENTS@:c"
 ]
-xinerama-shadow-crop = true;
 
 ### Blur
 blur:{
@@ -52,8 +51,6 @@ backend = "glx";
 #backend = "xrender";
 vsync = true;
 
-glx-no-stencil = true;
-glx-no-rebind-pixmap = true;
 xrender-sync-fence = true;
 
 dbus=true;
@@ -74,3 +71,7 @@ mark-wmwin-focused = true;
 mark-ovredir-focused = true;
 use-ewmh-active-win = true;
 detect-client-leader = true;
+
+## Fixes graphical issues (jitter/flickering) in Jetbrains IDEs
+## TODO: This doesn't fully fix the issue
+unredir-if-possible = false;

config/powerline/colorschemes/pdb/default.json

@@ -1,5 +1,5 @@
 {
 	"groups": {
-		"stack_depth": { "fg": "gb:light1", "bg": "gb:light4", "attrs": ["bold"] }
+		"stack_depth": { "fg": "gray1", "bg": "gray10", "attrs": ["bold"] }
 	}
 }

config/powerline/colorschemes/pdb/gruvbox.json

@@ -0,0 +1,5 @@
+{
+	"groups": {
+		"stack_depth": { "fg": "gb:light1", "bg": "gb:light4", "attrs": ["bold"] }
+	}
+}

config/powerline/config.json

@@ -13,7 +13,7 @@
 			}
 		},
 		"pdb": {
-			"colorscheme": "default",
+			"colorscheme": "gruvbox",
 			"theme": "default"
 		},
 		"shell": {

config/profile

@@ -1,6 +1,130 @@
-export TERMINAL=alacritty
-export EDITOR=nvim
-export SSH_AUTH_SOCK="$XDG_RUNTIME_DIR/ssh-agent.socket"
-alias vim=nvim
-XDG_DATA_DIRS="/var/lib/flatpak/exports/share:$XDG_DATA_DIRS"
+# Override in .profile.local for custom repo
+DOTFILES_LOCAL_REPOSITORY="https://gitbox.branderson.io/branderson/dotfiles-local"
 
+# Programs expected to be installed by tools
+# These are the name on $PATH, not the package name
+dependencies=(
+    tree
+    nvim
+    ag
+    fzf
+    node
+    cowsay
+    fortune
+)
+
+# Load dotfiles directory into DOTFILES_DIR
+# Dotfiles directory should be in environment or ~/.dotfiles-config
+if [ -f "$HOME/.dotfiles-config" ]; then
+    source "$HOME/.dotfiles-config"
+fi
+
+# PATHs
+## Earlier paths in PATH checked first
+if [ -d /usr/games ]; then
+    export PATH="/usr/games:$PATH"
+fi
+if [ -d /opt/homebrew/opt/coreutils/libexec/gnubin ]; then
+    export PATH="/opt/homebrew/opt/coreutils/libexec/gnubin:$PATH"
+fi
+if [ -d /opt/homebrew/opt/python@3.13/libexec/bin ]; then
+    export PATH="/opt/homebrew/opt/python@3.13/libexec/bin:$PATH"
+fi
+if [ -d /opt/homebrew/bin ]; then
+    export PATH="/opt/homebrew/bin:$PATH"
+fi
+## Keep user bin directories first in PATH so they're preferred
+if [ -d "$DOTFILES_DIR/bin" ]; then
+    export PATH="$DOTFILES_DIR/bin:$PATH"
+fi
+## OS-specific binaries
+if [[ $OSTYPE == 'darwin'* ]]; then
+    if [[ -d "$DOTFILES_DIR/macbin" ]]; then
+        export PATH="$DOTFILES_DIR/macbin:$PATH"
+    fi
+elif [[ $OSTYPE == 'linux'* ]]; then
+    if [[ -d "$DOTFILES_DIR/linbin" ]]; then
+        export PATH="$DOTFILES_DIR/linbin:$PATH"
+    fi
+fi
+if [ -d "$HOME/.local/bin" ]; then
+    export PATH="$HOME/.local/bin:$PATH"
+fi
+if [ -d "$HOME/bin" ]; then
+    export PATH="$HOME/bin:$PATH"
+fi
+
+source "$HOME/.bash_functions"
+
+# Set up brew if on macOS
+if [[ $OSTYPE == 'darwin'* ]]; then
+    if [ -f /opt/homebrew/bin/brew ]; then
+        eval "$(/opt/homebrew/bin/brew shellenv)"
+    fi
+fi
+
+# Prefer alacritty terminal if installed
+if program_installed alacritty; then
+    export TERMINAL=alacritty
+fi
+
+# Prefer neovim, if installed
+if program_installed nvim; then
+    export EDITOR=nvim
+    alias vim=nvim
+fi
+
+if program_installed powerline; then
+    # Make powerline support Python virtualenvs
+    export POWERLINE_COMMAND="$DOTFILES_DIR/scripts/powerline-wrapper.sh"
+fi
+
+# alias make='nocorrect make'
+# alias git='nocorrect git'
+# Crontab
+#alias crontab-e='vim ~/.crontab && crontab ~/.crontab'
+
+#alias sl="sl -laF"
+
+# Put flatpak apps in XDG
+if program_installed flatpak; then
+    export XDG_DATA_DIRS="/var/lib/flatpak/exports/share:$XDG_DATA_DIRS"
+fi
+
+# pyenv paths
+export PYENV_ROOT="$HOME/.pyenv"
+export PATH="$PYENV_ROOT/bin:$PATH"
+
+# Make sure ssh-agent is available 
+if [ -n "$LOAD_SSH_KEYS" ] && [ "$LOAD_SSH_KEYS" -eq 1 ]; then
+    if program_installed ssh-add && [ ! -z "$SSH_AUTH_SOCK" ] && [ -d "$SSH_AUTH_SOCK" ] > /dev/null 2>&1 ; then
+        # Add SSH keys to agent if not already added
+        ## Find existing keys, supporting one layer of folder organization
+        public_keys=($(find "$HOME/.ssh/" -maxdepth 2 -name "*.pub"))
+        if [ ${#public_keys[@]} -gt 0 ]; then
+            for public_key in "${public_keys[@]}"; do
+                if [[ $(uname -s) == Linux* ]]; then
+                    # Add SSH keys only if not already present
+                    ssh-add -l | grep -q `ssh-keygen -lf "$public_key"  | awk '{print $2}'` || ssh-add -k
+                    break
+                elif [[ $(uname -s) == Darwin* ]]; then
+                    # Add SSH keys only if not already present
+                    ssh-add -l | grep -q `ssh-keygen -lf "$public_key"  | awk '{print $2}'` || ssh-add --apple-use-keychain
+                    break
+                fi
+            done
+        fi
+    fi
+fi
+
+if program_installed i3; then
+    # Set QT environment variables
+    export QT_QPA_PLATFORMTHEME="qt5ct"
+fi
+
+# Extra domains dejima's firewall should allow beyond its defaults
+export ALLOWED_DOMAINS=""
+
+# Gitea host, used by bin/gitea-pr and dejima's git-push-guard hook
+export GITEA_SSH_HOST="gitbox.bradina.localdomain"
+export GITEA_API="https://gitbox.branderson.io/api/v1"

config/systemd/archlinux-keyring-wkd-sync.service

@@ -0,0 +1,37 @@
+[Unit]
+After=network-online.target nss-lookup.target
+ConditionPathIsDirectory=/etc/pacman.d/gnupg/
+ConditionPathIsReadWrite=/etc/pacman.d/gnupg/
+ConditionFileIsExecutable=/usr/bin/archlinux-keyring-wkd-sync
+Description=Refresh existing keys of archlinux-keyring
+Wants=network-online.target
+
+[Service]
+ExecStart=/usr/bin/archlinux-keyring-wkd-sync
+
+CapabilityBoundingSet=
+DeviceAllow=
+LockPersonality=true
+MemoryDenyWriteExecute=true
+NoNewPrivileges=true
+PrivateDevices=true
+PrivateTmp=true
+ProtectClock=true
+ProtectControlGroups=true
+ProtectHome=true
+ProtectHostname=true
+ProtectKernelLogs=true
+ProtectKernelModules=true
+ProtectKernelTunables=true
+ProtectProc=noaccess
+ProtectSystem=strict
+ReadWritePaths=/etc/pacman.d/gnupg
+RemoveIPC=true
+RestrictAddressFamilies=~AF_PACKET AF_NETLINK
+RestrictNamespaces=true
+RestrictRealtime=true
+RestrictSUIDSGID=true
+SystemCallArchitectures=native
+SystemCallFilter=@system-service
+SystemCallFilter=~@resources
+

config/systemd/archlinux-keyring-wkd-sync.timer

@@ -0,0 +1,11 @@
+[Unit]
+Description=Refresh existing PGP keys of archlinux-keyring regularly
+
+[Timer]
+OnCalendar=weekly
+Persistent=true
+RandomizedDelaySec=12h
+
+[Install]
+WantedBy=timers.target
+

config/systemd/update-wallpapers.service

@@ -0,0 +1,14 @@
+[Unit]
+Description=Update wallpapers when display change detected
+
+[Service]
+Type=simple
+User=brad
+Environment=DISPLAY=:0
+ExecStartPre=/bin/sleep 3
+# TODO: The file might not be here if ~/.dotfiles-config set to somewhere else
+ExecStart=/home/brad/dotfiles/bin/update-wallpaper
+
+[Install]
+WantedBy=multi-user.target
+

config/tmux.conf

@@ -1,2 +1,185 @@
-# run-shell "~/.tmux/verify_tmux_version.sh"
-source-file "~/.tmux/tmux_3.1c.conf"
+# ----------------------------------------------------------------------------
+# Prefix
+# ----------------------------------------------------------------------------
+set -g prefix C-a
+unbind C-b
+bind C-a send-prefix
+bind Tab last-window
+
+# ----------------------------------------------------------------------------
+# General behavior
+# ----------------------------------------------------------------------------
+set-option -g set-titles on
+set -g default-terminal "screen-256color"
+set -g history-limit 10000
+set -sg escape-time 1
+set-option -g base-index 1
+setw -g pane-base-index 1
+setw -g aggressive-resize on
+
+# ----------------------------------------------------------------------------
+# Windows and panes
+# ----------------------------------------------------------------------------
+bind T swap-window -t 1
+bind | split-window -h -c "#{pane_current_path}"
+bind - split-window -v -c "#{pane_current_path}"
+bind c new-window -c "#{pane_current_path}"
+
+bind h select-pane -L
+bind j select-pane -D
+bind k select-pane -U
+bind l select-pane -R
+
+# Smart pane switching with awareness of vim splits
+is_vim='echo "#{pane_current_command}" | grep -iqE "(^|\/)g?(view|n?vim?)(diff)?$"'
+# Claude Code also wants its own use of C-j (insert newline), same as vim
+# wants C-h/j/k/l for its own window navigation -- forward it raw instead of
+# letting tmux swallow it for pane-switching.
+is_vim_or_claude='echo "#{pane_current_command}" | grep -iqE "(^|\/)(g?(view|n?vim?)(diff)?|claude)$"'
+bind -n C-h if-shell "$is_vim" "send-keys C-h" "select-pane -L"
+bind -n C-j if-shell "$is_vim_or_claude" "send-keys C-j" "select-pane -D"
+bind -n C-k if-shell "$is_vim" "send-keys C-k" "select-pane -U"
+bind -n C-l if-shell "$is_vim" "send-keys C-l" "select-pane -R"
+bind -n 'C-\' if-shell "$is_vim" "send-keys 'C-\\'" "select-pane -l"
+
+bind -r C-h select-window -t :-
+bind -r C-l select-window -t :+
+
+bind a setw synchronize-panes
+
+# Fuzzy pickers over every session/window/pane, each with a live preview of
+# what it's running (tmux-fzf). prefix+F opens the plugin's own top-level
+# menu; these skip straight to the panels used most -- pane.sh is where
+# break/join/swap live, i.e. moving a pane into another window without
+# hand-typing a target the way join-pane needs.
+#
+# TMUX_FZF_CLIENT pins the action to the client that opened it, exactly as
+# the plugin's own binding does: a command run via run-shell has no client
+# context of its own, so tmux otherwise falls back to the most recently
+# active client -- the wrong terminal whenever a second client (e.g. a
+# browser one over ttyd) is attached to the same session.
+bind P run-shell -b "TMUX_FZF_CLIENT='#{client_tty}' ~/.tmux/plugins/tmux-fzf/scripts/pane.sh"
+bind W run-shell -b "TMUX_FZF_CLIENT='#{client_tty}' ~/.tmux/plugins/tmux-fzf/scripts/window.sh"
+bind S run-shell -b "TMUX_FZF_CLIENT='#{client_tty}' ~/.tmux/plugins/tmux-fzf/scripts/session.sh"
+
+# ----------------------------------------------------------------------------
+# Copy mode and mouse
+# ----------------------------------------------------------------------------
+setw -g mode-keys vi
+set-option -g -q mouse on
+
+bind y run 'tmux save-buffer - | $HOME/dotfiles/bin/clipboard-copy'
+bind C-y run 'tmux save-buffer - | $HOME/dotfiles/bin/clipboard-copy'
+
+# Let escape sequences a pane explicitly DCS-wraps for passthrough (e.g.
+# sixel image data, see the iTerm2 terminal-features line below) reach the
+# real terminal, even when nested behind ssh/tmux layers. Not used for the
+# clipboard -- that has its own relay via the pane-set-clipboard hook above.
+# allow-passthrough was added in tmux 3.3; older tmux doesn't understand the
+# option, so only set it when the running tmux is new enough.
+if-shell "tmux -V | awk '{print $2}' | awk -F. '{if ($1*1000+$2 >= 3003) exit 0; else exit 1}'" 'set -g allow-passthrough on'
+
+# Let tmux tell Shift+Enter apart from plain Enter and forward that
+# distinction inward, so Claude Code's Shift+Enter-inserts-newline shortcut
+# works. extended-keys/terminal-features need tmux >= 3.2. The terminal
+# name is matched with '*' rather than the commonly-suggested 'xterm*',
+# because a nested tmux's "terminal" is the outer tmux, which reports
+# itself using default-terminal above (screen-256color) -- 'xterm*' would
+# never match that, breaking the nested case this is meant to support.
+#
+# Investigated as a suspect for multi-line paste getting corrupted with
+# literal CSI 27;<mod>;<key>~ garbage in place of newlines (see Claude Code
+# issues #43169 and #30239) -- turning this off did not fix that paste
+# corruption, so it's an upstream Claude Code paste-tokenizer bug, not
+# something caused by this setting. Restored.
+if-shell "tmux -V | awk '{print $2}' | awk -F. '{if ($1*1000+$2 >= 3002) exit 0; else exit 1}'" 'set -s extended-keys on; set -as terminal-features "*:extkeys"'
+
+# Accept pane-originated OSC 52 clipboard-set attempts into a real tmux
+# buffer. Only on-vs-off matters here -- off would refuse to even look at
+# these escapes; "on" (rather than "external") is needed so the pane-set-
+# clipboard hook below has an actual buffer to read.
+set -g set-clipboard on
+
+# tmux's own mechanism for forwarding an accepted clipboard-set (or its own
+# copy-mode copies) to the real terminal is generating a fresh OSC 52 write
+# via the "Ms" terminfo capability -- confirmed unreliable here (both
+# pane-forwarded and tmux-generated OSC 52 silently failed to reach the
+# clipboard even with Ms correctly registered against Alacritty). Relay it
+# ourselves instead: whenever any pane sets the clipboard, grab what was
+# just captured above and write it straight to this client's own terminal
+# device. If that's a real terminal, this is the final hop and we're done.
+# If it's actually another tmux one layer further out (e.g. this tmux is
+# itself running inside an outer tmux over ssh), that data becomes pane
+# output there, and the *same* hook -- present there too, since it's the
+# same dotfiles -- fires again. That recurses cleanly through however many
+# tmux layers are actually in the chain, without any of them needing to
+# know the total count in advance.
+set-hook -g pane-set-clipboard 'run-shell "tmux save-buffer - | $HOME/dotfiles/bin/tmux-clipboard-relay #{client_tty}"'
+
+# The default/no-argument form of copy-pipe (used by double/triple-click and
+# a couple of default bindings) pipes to this option instead of a literal
+# command -- route it through the same working script as the explicit
+# copy-pipe bindings in tmux/modern.conf.
+set -g copy-command '$HOME/dotfiles/bin/clipboard-copy'
+
+# iTerm2 supports SIXEL images (since 3.3.0) but doesn't set a distinct TERM
+# to identify itself, so this matches on its usual "xterm-256color" report --
+# any other client reporting that same TERM will also be treated as
+# sixel-capable. Alacritty is deliberately left off: upstream Alacritty has
+# no sixel support, so telling tmux otherwise would replace today's clean
+# text placeholder with garbled escape data.
+set -as terminal-features ",xterm-256color:sixel"
+
+# tmux renamed the copy-mode key table (vi-copy -> copy-mode-vi) and changed
+# bind-key's table flag (-t -> -T) in 2.4. Source the file matching the
+# running tmux so old tmux never parses syntax it doesn't understand.
+if-shell "tmux -V | awk '{print $2}' | awk -F. '{if ($1*1000+$2 < 2004) exit 0; else exit 1}'" 'source-file ~/.tmux/legacy.conf' 'source-file ~/.tmux/modern.conf'
+
+# ----------------------------------------------------------------------------
+# Misc bindings
+# ----------------------------------------------------------------------------
+bind-key C run-shell "cal $(date +%Y)"
+bind r source-file ~/.tmux.conf \; display "Reloaded config"
+
+# A pane whose connection died mid-redraw (e.g. an SSH session killed by the
+# laptop sleeping) can get stuck with tmux thinking the cursor is hidden,
+# since that's tracked from the pane's own output and nothing ever sent the
+# matching show-cursor sequence. Re-run it in the active pane to fix it.
+bind R send-keys "printf '\\033[?25h'" Enter
+
+# ----------------------------------------------------------------------------
+# Powerline (guarded so machines without it don't error on load)
+# ----------------------------------------------------------------------------
+run-shell "command -v powerline-daemon >/dev/null 2>&1 && powerline-daemon -q; true"
+run-shell "command -v powerline-config >/dev/null 2>&1 && powerline-config tmux setup; true"
+
+# ----------------------------------------------------------------------------
+# Status bar
+# ----------------------------------------------------------------------------
+# Flash the status bar when this client's prefix key is armed, so nested
+# tmux sessions (e.g. laptop -> ssh -> devbox tmux) make it obvious which
+# layer is about to receive the next keystroke. Falls back to whatever
+# status-style powerline set above (captured here) the rest of the time.
+# Colors match gruvbox's own visual/selection convention (bg0 on orange).
+set -g @status_style_armed "bg=#fe8019,fg=#282828"
+run-shell 'tmux set-option -g @status_style_normal "$(tmux show-options -gv status-style)"'
+set -g status-style "#{?client_prefix,#{@status_style_armed},#{@status_style_normal}}"
+
+# ----------------------------------------------------------------------------
+# Plugins (TPM)
+# ----------------------------------------------------------------------------
+set -g @plugin 'tmux-plugins/tpm'
+set -g @plugin 'tmux-plugins/tmux-sensible'
+# Checked out as a submodule under config/tmux/plugins rather than left for
+# TPM to clone on first prefix+I: ~/.tmux is a symlink to that directory, so
+# a TPM-installed plugin lands inside this repo as untracked files. The
+# submodule pins a version, installs with the existing "git submodule
+# update --init" in install.sh, and keeps git status clean. TPM still sources
+# it from the @plugin line below and can still update it.
+set -g @plugin 'sainnhe/tmux-fzf'
+
+# Local overrides
+if-shell "[ -f ~/.tmux_local.conf ]" 'source ~/.tmux_local.conf'
+
+# Initialize TPM (must be the last line)
+run '~/.tmux/plugins/tpm/tpm'

config/tmux/legacy.conf

@@ -0,0 +1,16 @@
+# tmux < 2.4 copy-mode key table (vi-copy, old -t flag) and mouse-wheel/
+# PageUp passthrough. Sourced conditionally from tmux.conf; see
+# tmux/modern.conf for tmux >= 2.4.
+
+bind-key -t vi-copy PPage page-up
+bind-key -t vi-copy NPage page-down
+bind-key -t vi-copy WheelUpPane halfpage-up
+bind-key -t vi-copy WheelDownPane halfpage-down
+bind-key -t vi-copy v begin-selection
+bind-key -t vi-copy y copy-pipe "$HOME/dotfiles/bin/clipboard-copy"
+unbind-key -t vi-copy Enter
+bind-key -t vi-copy Enter copy-pipe "$HOME/dotfiles/bin/clipboard-copy"
+
+bind-key -n PPage if-shell -F "#{alternate_on}" "send-keys PPage" "copy-mode -e; send-keys PPage"
+bind-key -n WheelUpPane if-shell -F -t = "#{alternate_on}" "send-keys -M" "select-pane -t =; copy-mode -e; send-keys -M"
+bind-key -n WheelDownPane if-shell -F -t = "#{alternate_on}" "send-keys -M" "select-pane -t =; send-keys -M"

config/tmux/modern.conf

@@ -0,0 +1,24 @@
+# tmux >= 2.4 copy-mode key table and mouse-wheel/PageUp passthrough.
+# Sourced conditionally from tmux.conf; see tmux/legacy.conf for older tmux.
+
+bind-key -T copy-mode-vi PPage send-keys -X page-up
+bind-key -T copy-mode-vi NPage send-keys -X page-down
+bind-key -T copy-mode-vi WheelUpPane send-keys -X halfpage-up
+bind-key -T copy-mode-vi WheelDownPane send-keys -X halfpage-down
+bind-key -T copy-mode-vi v send-keys -X begin-selection
+bind-key -T copy-mode-vi y send-keys -X copy-pipe "$HOME/dotfiles/bin/clipboard-copy"
+unbind-key -T copy-mode-vi Enter
+bind-key -T copy-mode-vi Enter send-keys -X copy-pipe "$HOME/dotfiles/bin/clipboard-copy"
+
+# The default MouseDragEnd1Pane binding (copy-selection-and-cancel) relies on
+# tmux's own OSC 52 write via the Ms terminfo capability, which doesn't
+# reliably reach every terminal (confirmed broken against Alacritty here).
+# Route mouse-drag copies through the same clipboard-copy script as keyboard
+# yanks instead, so both use the mechanism that's actually proven to work.
+bind-key -T copy-mode-vi MouseDragEnd1Pane send-keys -X copy-pipe-and-cancel "$HOME/dotfiles/bin/clipboard-copy"
+
+# Let mouse wheel / PageUp pass through to apps using the alternate screen
+# (vim, less, etc.) instead of always entering copy-mode
+bind-key -T root PPage if-shell -F "#{alternate_on}" "send-keys PPage" "copy-mode -e; send-keys PPage"
+bind-key -T root WheelUpPane if-shell -F -t = "#{alternate_on}" "send-keys -M" "select-pane -t =; copy-mode -e; send-keys -M"
+bind-key -T root WheelDownPane if-shell -F -t = "#{alternate_on}" "send-keys -M" "select-pane -t =; send-keys -M"

config/tmux/tmux_1.9_down.conf

@@ -1,37 +0,0 @@
-# PREFIX | splits horizontally and PREFIX - splits vertically
-bind | split-window -h
-bind - split-window -v
-
-# mouse support
-set -g mode-mouse on # scrolling
-set -g mouse-select-pane on # clicking into panes
-set -g mouse-resize-pane on # resizing panes
-set -g mouse-select-window on # select windows
-
-# toggle mouse support
-bind m \
-    set -g mode-mouse on \;\
-    set -g mouse-resize-pane on \;\
-    set -g mouse-select-pane on \;\
-    set -g mouse-select-window on \;\
-    display 'Mouse: ON'
-
-bind M \
-    set -g mode-mouse off \;\
-    set -g mouse-resize-pane off \;\
-    set -g mouse-select-pane off \;\
-    set -g mouse-select-window off \;\
-    display 'Mouse: OFF'
-
-# ----------------------
-# set some pretty colors
-# ----------------------
-# set pane colors - hilight the active pane
-# set-option -g pane-border-fg colour235 #base02
-# set-option -g pane-active-border-fg colour240 #base01
-
-# # colorize messages in the command line
-# set-option -g message-bg black #base02
-# set-option -g message-fg brightred #orange
-
-source "$HOME/.tmux/tmux_shared.conf"

config/tmux/tmux_1.9_to_2.1.conf

@@ -1,2 +0,0 @@
-
-source "$HOME/.tmux/tmux_shared.conf"

config/tmux/tmux_2.1_to_2.5.conf

@@ -1,48 +0,0 @@
-# PREFIX | splits horizontally and PREFIX - splits vertically
-bind | split-window -h -c "#{pane_current_path}"
-bind - split-window -v -c "#{pane_current_path}"
-
-# open new window with pwd
-bind c new-window -c "#{pane_current_path}"
-
-# PREFIX T makes current window index 1
-bind T swap-window -t 1
-
-# use vim movement for panes
-bind h select-pane -L
-bind j select-pane -D
-bind k select-pane -U
-bind l select-pane -R
-
-# mouse support
-set-option -g -q mouse on
-
-# Copy Mode
-bind-key -t root PPage if-shell -F "#{alternate_on}" "send-keys PPage" "copy-mode -e; send-keys PPage"
-bind-key -t vi-copy PPage page-up
-bind-key -t vi-copy NPage page-down
-# Mouse Wheel
-bind-key -t root WheelUpPane if-shell -F -t = "#{alternate_on}" "send-keys -M" "select-pane -t =; copy-mode -e; send-keys -M"
-bind-key -t root WheelDownPane if-shell -F -t = "#{alternate_on}" "send-keys -M" "select-pane -t =; send-keys -M"
-bind-key -t vi-copy WheelUpPane halfpage-up
-bind-key -t vi-copy WheelDownPane halfpage-down
-
-# Make sure the client is always using the correct environment
-# eval $(tmux switch-client \; show-environment -s)
-
-# Copy/Paste
-#
-# provide access to clipboard
-# set-option -g default-command "reattach-to-user-namespace -l zsh"
-# set-window-option -g automatic-rename on
-
-# use vim keybindings in copy mode
-setw -g mode-keys vi
-
-# v selection
-bind-key -t vi-copy v begin-selection
-bind-key -t vi-copy y copy-pipe "reattach-to-user-namespace pbcopy"
-
-# make enter use copy pipe
-unbind -t vi-copy Enter
-bind-key -t vi-copy Enter copy-pipe "reattach-to-user-namespace pbcopy"

config/tmux/tmux_2.5_up.conf

@@ -1,42 +0,0 @@
-# PREFIX | splits horizontally and PREFIX - splits vertically
-bind | split-window -h -c "#{pane_current_path}"
-bind - split-window -v -c "#{pane_current_path}"
-
-# open new window with pwd
-bind c new-window -c "#{pane_current_path}"
-
-# use vim keybindings in copy mode
-setw -g mode-keys vi
-
-# Copy Mode
-bind-key -T copy-mode-vi PPage send-keys -X page-up
-bind-key -T copy-mode-vi NPage send-keys -X page-down
-
-# Mouse Wheel
-bind-key -T copy-mode-vi WheelUpPane send-keys -X halfpage-up
-bind-key -T copy-mode-vi WheelDownPane send-keys -X halfpage-down
-
-# v selection
-bind-key -T copy-mode-vi v send-keys -X begin-selection
-bind-key -T copy-mode-vi y send-keys -X copy-pipe "reattach-to-user-namespace pbcopy"
-
-# make enter use copy pipe
-unbind -T copy-mode-vi Enter
-bind-key -T copy-mode-vi Enter send-keys -X copy-pipe "reattach-to-user-namespace pbcopy"
-
-set-option -g -q mouse on
-set-option -g -q mouse-resize-pane on
-set-option -g -q mouse-select-pane on
-set-option -g -q mouse-select-window on
-
-# Enable middle click in urxvt
-set-option -ga terminal-override ',rxvt-uni*:XT:Ms=\E]52;%p1%s;%p2%s\007'
-
-# Copy Mode
-bind-key -T root PPage if-shell -F "#{alternate_on}" "send-keys PPage" "copy-mode -e; send-keys PPage"
-
-# Mouse Wheel
-bind-key -T root WheelUpPane if-shell -F -t = "#{alternate_on}" "send-keys -M" "select-pane -t =; copy-mode -e; send-keys -M"
-bind-key -T root WheelDownPane if-shell -F -t = "#{alternate_on}" "send-keys -M" "select-pane -t =; send-keys -M"
-
-source ~/.tmux/tmux_shared.conf

config/tmux/tmux_3.1c.conf

@@ -1,42 +0,0 @@
-# PREFIX | splits horizontally and PREFIX - splits vertically
-bind | split-window -h -c "#{pane_current_path}"
-bind - split-window -v -c "#{pane_current_path}"
-
-# open new window with pwd
-bind c new-window -c "#{pane_current_path}"
-
-# use vim keybindings in copy mode
-setw -g mode-keys vi
-
-# Copy Mode
-bind-key -T copy-mode-vi PPage send-keys -X page-up
-bind-key -T copy-mode-vi NPage send-keys -X page-down
-
-# Mouse Wheel
-bind-key -T copy-mode-vi WheelUpPane send-keys -X halfpage-up
-bind-key -T copy-mode-vi WheelDownPane send-keys -X halfpage-down
-
-# v selection
-bind-key -T copy-mode-vi v send-keys -X begin-selection
-bind-key -T copy-mode-vi y send-keys -X copy-pipe "reattach-to-user-namespace pbcopy"
-
-# make enter use copy pipe
-unbind -T copy-mode-vi Enter
-bind-key -T copy-mode-vi Enter send-keys -X copy-pipe "reattach-to-user-namespace pbcopy"
-
-set-option -g -q mouse on
-set-option -g -q mouse-resize-pane on
-set-option -g -q mouse-select-pane on
-set-option -g -q mouse-select-window on
-
-# Enable middle click in urxvt
-set-option -ga terminal-override ',rxvt-uni*:XT:Ms=\E]52;%p1%s;%p2%s\007'
-
-# Copy Mode
-bind-key -T root PPage if-shell -F "#{alternate_on}" "send-keys PPage" "copy-mode -e; send-keys PPage"
-
-# Mouse Wheel
-bind-key -T root WheelUpPane if-shell -F -t = "#{alternate_on}" "send-keys -M" "select-pane -t =; copy-mode -e; send-keys -M"
-bind-key -T root WheelDownPane if-shell -F -t = "#{alternate_on}" "send-keys -M" "select-pane -t =; send-keys -M"
-
-source ~/.tmux/tmux_shared.conf

config/tmux/tmux_shared.conf

@@ -1,106 +0,0 @@
-# use UTF8
-# set -g utf8
-# set-window-option -g utf8 on
-
-# 256 color mode
-set -g default-terminal "screen-256color"
-# set-option -sa terminal-overrides ',screen*:RGB'
-# set-option -ga terminal-overrides ',screen*:Tc'
-# set-option -sa terminal-overrides ',xterm*:RGB'
-# set-option -ga terminal-overrides ',xterm*:Tc'
-# set-option -sa terminal-overrides ',tmux*:RGB'
-# set-option -ga terminal-overrides ',tmux*:Tc'
-# set-option -sa terminal-overrides ',rxvt*:RGB'
-# set-option -ga terminal-overrides ',rxvt*:Tc'
-
-# Properly handle ssh agent forwarding when reconnecting to session
-# set-environment -g 'SSH_AUTH_SOCK' ~/.ssh/ssh_auth_sock
-
-set-option -g set-titles on
-# Tmux attach will create a new session if one doesn't exist
-# new-session -n $HOST
-
-# set scrollback history
-set -g history-limit 10000
-
-# set Ctrl-a as prefix and unbind Ctrl-b
-set -g prefix C-a
-unbind C-b
-
-# last active window
-# bind-key C-a last-window
-bind Tab last-window
-
-# pass prefix through to application
-bind C-a send-prefix
-
-# don't constrain size unless smaller client looking at window
-setw -g aggressive-resize on
-
-# set command delay
-set -sg escape-time 1
-
-# set base index to 1 rather than 0
-set-option -g base-index 1
-setw -g pane-base-index 1
-
-# use PREFIX-r to reload config
-bind r source-file ~/.tmux/tmux_shared.conf \; display "Reloaded config"
-
-# PREFIX T makes current window index 1
-bind T swap-window -t 1
-
-# use vim movement for panes
-bind h select-pane -L
-bind j select-pane -D
-bind k select-pane -U
-bind l select-pane -R
-
-# Smart pane switching with awareness of vim splits
-is_vim='echo "#{pane_current_command}" | grep -iqE "(^|\/)g?(view|n?vim?)(diff)?$"'
-bind -n C-h if-shell "$is_vim" "send-keys C-h" "select-pane -L"
-bind -n C-j if-shell "$is_vim" "send-keys C-j" "select-pane -D"
-bind -n C-k if-shell "$is_vim" "send-keys C-k" "select-pane -U"
-bind -n C-l if-shell "$is_vim" "send-keys C-l" "select-pane -R"
-bind -n 'C-\' if-shell "$is_vim" "send-keys 'C-\\'" "select-pane -l"
-
-# bind C-h and C-l to cycle through panes
-bind -r C-h select-window -t :-
-bind -r C-l select-window -t :+
-
-# Synchonize keyboard input across panes
-bind a setw synchronize-panes
-
-# open calendar
-bind-key C run-shell "cal $(date +%Y)"
-
-# Make sure the client is always using the correct environment
-# eval $(tmux switch-client \; show-environment -s)
-
-bind y run 'tmux save-buffer - | reattach-to-user-namespace pbcopy '
-bind C-y run 'tmux save-buffer - | reattach-to-user-namespace pbcopy '1
-
-# ----------------------
-# set some pretty colors
-# ----------------------
-# set pane colors - hilight the active pane
-# set-option -g pane-border-fg colour235 #base02
-# set-option -g pane-active-border-fg colour240 #base01
-
-# Show active pane
-# set-window-option -g window-style 'bg=#181818'
-# set-window-option -g window-active-style 'bg=black'
-# set-window-option -g pane-active-border-style ''
-# set-window-option -g pane-active-border-style 'fg=#181818'
-
-# colorize messages in the command line
-# set-option -g message-bg black #base02
-# set-option -g message-fg brightred #orange
-
-# Powerline
-run-shell "powerline-daemon -q"
-run-shell "powerline-config tmux setup"
-# source-file $POWERLINE_ROOT/bindings/tmux/powerline.conf
-
-# Local overrides
-if-shell "[ -f ~/.tmux_local.conf ]" 'source ~/.tmux_local.conf'

config/tmux/verify_tmux_version.sh

@@ -1,27 +0,0 @@
-#!/bin/bash
-
-verify_tmux_version() {
-    tmux_home=~/.tmux
-    tmux_version="$(tmux -V | cut -c 6-)"
-
-    # This is necessary because 3.1c gives a syntax error in bc
-    # TODO Fix this it will break with the next tmux version
-    if [[ $tmux_version -eq "3.1c"]] ; then
-        tmux source-file $tmux_home/tmux_3.1c.conf
-        exit
-    if [[ $(echo "$tmux_version >= 2.5" | bc) -eq 1 ]] ; then
-        tmux source-file $tmux_home/tmux_3.1c.conf
-        exit
-    elif [[ $(echo "$tmux_version >= 2.1" | bc) -eq 1 ]] ; then
-        tmux source-file $tmux_home/tmux_2.1_to_2.5.conf
-        exit
-    elif [[ $(echo "$tmux_version >= 1.9" | bc) -eq 1 ]] ; then
-        tmux source-file $tmux_home/tmux_1.9_to_2.1.conf
-        exit
-    else
-        tmux source-file $tmux_home/tmux_1.9_down.conf
-        exit
-    fi
-}
-
-verify_tmux_version

config/udev/85-drm-hotplug.rules

@@ -0,0 +1 @@
+ACTION=="change", SUBSYSTEM=="drm", RUN+="/usr/bin/systemctl start --no-block update-wallpapers.service"

config/zsh_functions

@@ -1,3 +1,30 @@
+# Returns 0 if program is installed and 1 otherwise
+function program_installed {
+    local return_=0
+
+    type $1 >/dev/null 2>&1 || { local return_=1; }
+
+    return "$return_"
+}
+
+function cd {
+  builtin cd "$@"
+
+  if [[ -z "$VIRTUAL_ENV" ]] ; then
+    # If env folder is found then activate the vitualenv
+      if [[ -d ./venv ]] ; then
+        source ./venv/bin/activate
+      fi
+  else
+    # If no longer within virtualenv, deactivate
+      parentdir="$(dirname "$VIRTUAL_ENV")"
+      if [[ "$PWD"/ != "$parentdir"/* ]] ; then
+        deactivate
+      fi
+  fi
+}
+
+
 function list_processes() {
     # List all processes matching the given process name string
     ps aux | grep $(whoami) | grep -i "$1" | grep -v grep
@@ -51,13 +78,19 @@ function check_dotfiles_version {
     # Return 2 if the repo is behind the remote
     # Return 3 if the repo is ahead of the remote
     # Return 4 if the repo has diverged from the remote
-    if [ ! -d $HOME/dotfiles ]; then
+    # Return 5 if DOTFILES_DIR is not set
+    if [ -z $DOTFILES_DIR ]; then
+        return 5
+    fi
+
+    if [ ! -d $DOTFILES_DIR ]; then
         return 2
     fi
 
-    pushd $HOME/dotfiles > /dev/null
+    pushd $DOTFILES_DIR > /dev/null
 
-    git fetch origin
+    # TODO: This may be gitbox
+    git fetch origin > /dev/null
     UPSTREAM=${1:-'@{u}'}
     LOCAL=$(git rev-parse @)
     REMOTE=$(git rev-parse "$UPSTREAM")
@@ -75,3 +108,57 @@ function check_dotfiles_version {
         return 4
     fi
 }
+
+function set_python_roots {
+    PYTHON_ROOTS=()
+    if [ -d $HOME/.local/lib/ ]; then
+        for directory in $(echo $HOME/.local/lib/python*(N)); do
+            PYTHON_ROOTS+=$directory
+        done
+    fi
+    if [ -d $HOME/.local/share/pipx/venvs/powerline-status/lib/ ]; then
+        for directory in $(echo $HOME/.local/share/pipx/venvs/powerline-status/lib/python*(N)); do
+            PYTHON_ROOTS+=$directory
+        done
+    fi
+    if [ -d $HOME/.local/pipx/venvs/powerline-status/lib/ ]; then
+        for directory in $(echo $HOME/.local/pipx/venvs/powerline-status/lib/python*(N)); do
+            PYTHON_ROOTS+=$directory
+        done
+    fi
+    if [ -d /usr/lib/ ]; then
+        for directory in $(echo /usr/lib/python*(N)); do
+            PYTHON_ROOTS+=$directory
+        done
+    fi
+    if [ -d /usr/local/lib/ ]; then
+        # TODO: Make this not print warnings when the directory doesn't exit
+        for directory in $(echo /usr/local/lib/python*(N)); do
+            PYTHON_ROOTS+=$directory
+        done
+    fi
+}
+
+function set_powerline_zsh_sources {
+    set_python_roots
+    # Powerline plugin from distribution agnostic install directory
+    ## Assemble list of possible sources
+    declare -ag POWERLINE_ZSH_SOURCES=()
+    if [[ -a $POWERLINE_ROOT/bindings/zsh/powerline.zsh ]]; then
+        # Prefer user-set powerline directory
+        POWERLINE_ZSH_SOURCES+=$POWERLINE_ROOT/bindings/zsh/powerline.zsh
+    fi
+    if [ -d /usr/share/powerline ]; then
+        # Apt installs here
+        POWERLINE_ZSH_SOURCES+="/usr/share/powerline/bindings/zsh/powerline.zsh"
+    fi
+    # If $POWERLINE_ROOT not set or set incorrectly, try default locations
+    for directory in $PYTHON_ROOTS; do
+        #for directory in $(echo $template); do
+        if [ -d "$directory" ]; then
+            POWERLINE_ZSH_SOURCES+="$directory"/site-packages/powerline/bindings/zsh/powerline.zsh
+            POWERLINE_ZSH_SOURCES+="$directory"/dist-packages/powerline/bindings/zsh/powerline.zsh
+        fi
+        # done
+    done
+}

config/zshrc

@@ -1,92 +1,91 @@
-# Gruvbox colors
-# source "$HOME/.vim/bundle/gruvbox/gruvbox_256palette.sh"
-[[ -f "$HOME/dotfiles/dependencies/gruvbox/gruvbox_256palette.sh" ]] && source "$HOME/dotfiles/dependencies/gruvbox/gruvbox_256palette.sh"
+# ZSH-specific environment variables
+# Override in .profile.local
 
-# Custom functions
-source "$HOME/.zsh_functions"
-
-# Path to your oh-my-zsh installation.
-export ZSH=$HOME/dotfiles/dependencies/ohmyzsh
-#export RUST_SRC_PATH=/usr/local/src/rust/src
-
-# Z
-# . $HOME/dotfiles/z/z.sh
-# Set name of the theme to load.
-# # Look in ~/.oh-my-zsh/themes/
-# # Optionally, if you set this to "random", it'll load a random theme each
-# # time that oh-my-zsh is loaded.
+## oh-my-zsh
+# Automatically update oh-my-zsh without asking
+DISABLE_UPDATE_PROMPT=true
+# Disable oh-my-zsh auto-update checks
+DISABLE_AUTO_UPDATE=false
+# How often to check for oh-my-zsh updates
+UPDATE_ZSH_DAYS=30
+# Disable cowsay on login by default.
+NO_ZSHRC_COWSAY=1
+# Theme to load [~/.oh-my-zsh/themes/]
 ZSH_THEME="agnoster"
-# Base16 Shell
-# BASE16_SHELL="$HOME/.config/base16-shell/base16-tomorrow.dark.sh"
-# [[ -s $BASE16_SHELL ]] && source $BASE16_SHELL
-# BASE16_SHELL="$HOME/.config/base16-shell/base16-ocean.dark.sh"
-# [[ -s $BASE16_SHELL ]] && source $BASE16_SHELL
-#
-# # Uncomment the following line to use case-sensitive completion.
-# # CASE_SENSITIVE="true"
-#
-# # Uncomment the following line to disable bi-weekly auto-update checks.
-# # DISABLE_AUTO_UPDATE="true"
-#
-# # Uncomment the following line to change how often to auto-update (in days).
-# # export UPDATE_ZSH_DAYS=13
-#
-# # Uncomment the following line to disable colors in ls.
-# # DISABLE_LS_COLORS="true"
-#
-# # Uncomment the following line to disable auto-setting terminal title.
-# # DISABLE_AUTO_TITLE="true"
-#
-# # Uncomment the following line to enable command auto-correction.
-# # ENABLE_CORRECTION="true"
-#
-# # Uncomment the following line to display red dots whilst waiting for completion.
-# # COMPLETION_WAITING_DOTS="true"
-#
-# # Uncomment the following line if you want to disable marking untracked files
-# # under VCS as dirty. This makes repository status check for large repositories
-# # much, much faster.
-# # DISABLE_UNTRACKED_FILES_DIRTY="true"
-#
-# # Uncomment the following line if you want to change the command execution time
-# # stamp shown in the history command output.
-# # The optional three formats: "mm/dd/yyyy"|"dd.mm.yyyy"|"yyyy-mm-dd"
-# # HIST_STAMPS="mm/dd/yyyy"
-#
-# # Would you like to use another custom folder than $ZSH/custom?
-# # ZSH_CUSTOM=/path/to/new-custom-folder
+# Automatic window title setting
+DISABLE_AUTO_TITLE="true"
+# Command correction support
+ENABLE_CORRECTION="false"
+# Case-sensitive completion
+CASE_SENSITIVE="false"
+# ls colors
+DISABLE_LS_COLORS="false"
+# Red ... on completion waiting
+COMPLETION_WAITING_DOTS="true"
 
-# # zsh-syntax-highlighting must come last
-plugins=(archlinux colorize command-not-found cp git github bower grunt npm macos)
-# tmux
-zmodload zsh/zpty
-
-# # User configuration
-
-# Enable environment variables as CD directories
-setopt cdablevars
-# Enable correction for mistyped commands
-unsetopt correctall
-# alias make='nocorrect make'
-# alias git='nocorrect git'
-
-#PATHs
-#export PATH=$HOME/bin:/usr/local/bin:$PATH
-#export MANPATH="/usr/local/man:$MANPATH"
-#PATH="$(ruby -e 'puts Gem.user_dir')/bin:$PATH"
-# Add user cowpath to COWPATH
-#COWPATH="$COWPATH:$HOME/dotfiles/cowfiles"
-# Make a random (cow?) with a random face say something
-# fortune -a | fmt -80 -s | cowthink -$(shuf -n 1 -e b d g p s t w y)  -f $(shuf -n 1 -e $(cowsay -l | tail -n +2)) -n
+# Uncomment the following line if you want to disable marking untracked files
+# under VCS as dirty. This makes repository status check for large repositories
+# much, much faster.
+# DISABLE_UNTRACKED_FILES_DIRTY="true"
+#
+# Uncomment the following line if you want to change the command execution time
+# stamp shown in the history command output.
+# The optional three formats: "mm/dd/yyyy"|"dd.mm.yyyy"|"yyyy-mm-dd"
+# HIST_STAMPS="mm/dd/yyyy"
 
 # User profiles
 source $HOME/.profile
 # Define $POWERLINE_ROOT
 if [ -f $HOME/.profile.local ]; then
+    set -a
     source $HOME/.profile.local
+    set +a
 fi
 
-source $ZSH/oh-my-zsh.sh
+# Custom functions
+source "$HOME/.zsh_functions"
+
+if [ -n "$DOTFILES_DIR" ] && [ -d "$DOTFILES_DIR" ]; then
+    # Load dependencies
+    ## oh-my-zsh
+    if [ ! -f "$DOTFILES_DIR/dependencies/ohmyzsh/oh-my-zsh.sh" ]; then
+        cd "$DOTFILES_DIR"
+        git submodule update --init
+        cd -
+    fi
+    export ZSH=$DOTFILES_DIR/dependencies/ohmyzsh
+    ## Gruvbox colors
+    [[ -f "$DOTFILES_DIR/dependencies/gruvbox/gruvbox_256palette.sh" ]] && source "$DOTFILES_DIR/dependencies/gruvbox/gruvbox_256palette.sh"
+fi
+missing_dependencies=()
+for dependency in "${dependencies[@]}"; do
+    if ! program_installed $dependency; then
+        missing_dependencies+="$dependency"
+    fi
+done
+if [ "${#missing_dependencies[@]}" -gt 0 ]; then
+    echo "Missing dependencies: ${missing_dependencies[@]}"
+fi
+
+# Dircolors
+# eval $(dircolors ~/.dircolors)
+
+# tmux
+zmodload zsh/zpty
+
+# Enable environment variables as CD directories
+setopt cdablevars
+# Enable correction for mistyped commands
+unsetopt correctall
+setopt appendhistory autocd extendedglob
+unsetopt beep
+
+alias -s txt=vim
+alias -s .c=vim
+
+if [ -d $ZSH ] && [ ! -z $ZSH ]; then
+    source $ZSH/oh-my-zsh.sh
+fi
 
 # Italic support
 if [ -f $HOME/.xterm-256color-italic.terminfo ]; then
@@ -96,114 +95,19 @@ if [ -f $HOME/.screen-256color-italic.terminfo ]; then
     tic $HOME/.screen-256color-italic.terminfo
 fi
 
+# TODO: Remove this
 # Use neovim where available
-if type nvim > /dev/null 2>&1; then
-    alias vim='nvim'
-fi
+# if type nvim > /dev/null 2>&1; then
+#     alias vim='nvim'
+# fi
 
 # # Preferred editor for local and remote sessions
 # # if [[ -n $SSH_CONNECTION ]]; then
-export EDITOR='vim'
+# export EDITOR='vim'
 # export TERM=xterm-256color
+# TODO ====
 
-# # else
-# #   export EDITOR='mvim'
-# # fi
-#
-# # Compilation flags
-# # export ARCHFLAGS="-arch x86_64"
-#
-# # ssh
-# # export SSH_KEY_PATH="~/.ssh/dsa_id"
-#
-# # Set personal aliases, overriding those provided by oh-my-zsh libs,
-# # plugins, and themes. Aliases can be placed here, though oh-my-zsh
-# # users are encouraged to define aliases within the ZSH_CUSTOM folder.
-# # For a full list of active aliases, run `alias`.
-# #
-# # Example aliases
-# # alias zshconfig="mate ~/.zshrc"
-# # alias ohmyzsh="mate ~/.oh-my-zsh"
-alias -s txt=vim
-alias -s .c=vim
-# Crontab
-#alias crontab-e='vim ~/.crontab && crontab ~/.crontab'
-
-# Lines configured by zsh-newuser-install
-setopt appendhistory autocd extendedglob
-unsetopt beep
 bindkey -v
-# End of lines configured by zsh-newuser-install
-# The following lines were added by compinstall
-zstyle :compinstall filename '~/.zshrc'
-
-autoload -Uz compinit
-compinit
-# End of lines added by compinstall
-
-DEFAULT_USER=brad
-
-# Syntax highlighting configuration
-# ZSH_HIGHLIGHT_STYLES[path]='bold'
-# ZSH_HIGHLIGHT_STYLES[path_prefix]=none
-# ZSH_HIGHLIGHT_STYLES[path_approx]='fg=yellow'
-# ZSH_HIGHLIGHT_STYLES[globbing]='fg=yellow'
-
-# Source files
-#typeset -ga sources
-#sources+=$HOME/dotfiles/shortcuts.txt
-
-# Powerline plugin from distribution agnostic install directory
-# pip install --user powerline-status &>/dev/null
-if [[ -a $POWERLINE_ROOT/bindings/zsh/powerline.zsh ]]; then
-    # Prefer user-set powerline directory
-    sources+=$POWERLINE_ROOT/bindings/zsh/powerline.zsh
-else
-    echo "Attempting to source Powerline bindings from default locations.\nPlease set \$POWERLINE_ROOT in .profile.local"
-    # If $POWERLINE_ROOT not set or set incorrectly, try default locations
-    sources+=$HOME/.local/lib/python2.6/site-packages/powerline/bindings/zsh/powerline.zsh
-    sources+=$HOME/.local/lib/python2.6/dist-packages/powerline/bindings/zsh/powerline.zsh
-    sources+=$HOME/.local/lib/python2.7/site-packages/powerline/bindings/zsh/powerline.zsh
-    sources+=$HOME/.local/lib/python2.7/dist-packages/powerline/bindings/zsh/powerline.zsh
-    sources+=$HOME/.local/lib/python3.6/site-packages/powerline/bindings/zsh/powerline.zsh
-    sources+=$HOME/.local/lib/python3.6/dist-packages/powerline/bindings/zsh/powerline.zsh
-    sources+=/usr/lib/python2.6/site-packages/powerline/bindings/zsh/powerline.zsh
-    sources+=/usr/lib/python2.6/dist-packages/powerline/bindings/zsh/powerline.zsh
-    sources+=/usr/local/lib/python2.6/site-packages/powerline/bindings/zsh/powerline.zsh
-    sources+=/usr/local/lib/python2.6/dist-packages/powerline/bindings/zsh/powerline.zsh
-    sources+=/usr/lib/python2.7/site-packages/powerline/bindings/zsh/powerline.zsh
-    sources+=/usr/lib/python2.7/dist-packages/powerline/bindings/zsh/powerline.zsh
-    sources+=/usr/local/lib/python2.7/site-packages/powerline/bindings/zsh/powerline.zsh
-    sources+=/usr/local/lib/python2.7/dist-packages/powerline/bindings/zsh/powerline.zsh
-    sources+=/usr/lib/python3.6/site-packages/powerline/bindings/zsh/powerline.zsh
-    sources+=/usr/lib/python3.6/dist-packages/powerline/bindings/zsh/powerline.zsh
-    sources+=/usr/local/lib/python3.6/site-packages/powerline/bindings/zsh/powerline.zsh
-    sources+=/usr/local/lib/python3.6/dist-packages/powerline/bindings/zsh/powerline.zsh
-fi
-foreach file (`echo $sources`)
-    if [[ -a $file ]]; then
-        source $file
-    fi
-end
-
-# Check dotfiles version
-check_dotfiles_version
-dotfiles_version=$?
-if [[ $dotfiles_version = 1 ]]; then
-    echo "Dotfiles repository not present at $HOME/dotfiles"
-elif [[ $dotfiles_version = 2 ]]; then
-    echo "Dotfiles repository at $HOME/dotfiles is outdated"
-elif [[ $dotfiles_version = 3 ]]; then
-    echo "Dotfiles repository at $HOME/dotfiles is ahead of origin"
-elif [[ $dotfiles_version = 4 ]]; then
-    echo "Dotfiles repository at $HOME/dotfiles has diverged from origin"
-fi
-
-# TMuxinator Completion
-# source ~/bin/tmuxinator.zsh
-
-# Dircolors
-# eval $(dircolors ~/.dircolors)
 
 # Keybindings
 bindkey -M vicmd 'K' run-help
@@ -215,26 +119,128 @@ bindkey -M viins ',,' vi-cmd-mode
 #bindkey '^o' ranger-cd
 #zle -N terminal-clock
 #bindkey '^t' terminal-clock
+# TMuxinator Completion
+# source ~/bin/tmuxinator.zsh
 
-#alias sl="sl -laF"
+zstyle :compinstall filename '~/.zshrc'
+autoload -Uz compinit
+compinit
+
+DEFAULT_USER="$USER"
+
+# Syntax highlighting configuration
+# ZSH_HIGHLIGHT_STYLES[path]='bold'
+# ZSH_HIGHLIGHT_STYLES[path_prefix]=none
+# ZSH_HIGHLIGHT_STYLES[path_approx]='fg=yellow'
+# ZSH_HIGHLIGHT_STYLES[globbing]='fg=yellow'
+
+# Source files
+#typeset -ga sources
+#sources+=$DOTFILES_DIR/shortcuts.txt
+
+# Check dotfiles version
+if [ -n "$NO_GIT_CHECK" ] && [ ! "$NO_GIT_CHECK" -eq 1 ]; then
+    # 5 second timeout to avoid delaying
+    timeout -k 5 5s $(which zsh) -c 'source ~/.zsh_functions && check_dotfiles_version'
+    dotfiles_version=$?
+    if [[ $dotfiles_version = 1 ]]; then
+        echo "Dotfiles repository not present at $DOTFILES_DIR"
+    elif [[ $dotfiles_version = 2 ]]; then
+        echo "Dotfiles repository at $DOTFILES_DIR is outdated"
+    elif [[ $dotfiles_version = 3 ]]; then
+        echo "Dotfiles repository at $DOTFILES_DIR is ahead of origin"
+    elif [[ $dotfiles_version = 4 ]]; then
+        echo "Dotfiles repository at $DOTFILES_DIR has diverged from origin"
+    elif [[ $dotfiles_version = 5 ]]; then
+        echo "Dotfiles repository not set in $HOME/.dotfiles-config"
+        echo "Please run ./install.sh in dotfiles repository and exit to create ~/.dotfiles-config"
+        echo "The following will not work until this is set:"
+        echo "  - oh-my-zsh will not be started"
+        echo "  - gruvbox color palette will not be loaded"
+        echo ""
+    fi
+fi
+
+# Powerline
+if program_installed powerline; then
+    if [ -n "$POWERLINE_ROOT" ] && \
+        [ -f "$POWERLINE_ROOT" ] && \
+        [ -f "$POWERLINE_ROOT/bindings/zsh/powerline.zsh" ]; then
+        # Skip lookup if location is known
+        source "$POWERLINE_ROOT/bindings/zsh/powerline.zsh"
+    else
+        found=0
+        set_powerline_zsh_sources
+        for file in $POWERLINE_ZSH_SOURCES; do
+            if [[ -a $file ]]; then
+                # TODO: Store the POWERLINE_ROOT in .profile.local if found
+                source $file
+                found=1
+                break
+            fi
+        done
+        if [ $found -eq 0 ]; then
+            echo "Powerline binding not found.\nPlease set \$POWERLINE_ROOT in .profile.local"
+        fi
+    fi
+fi
 
 # Tool options
 export SHELLCHECK_OPTS="-e SC2029 -e SC2155"
 
+# Limit claude-code: cap CPU/memory/process count
+# Adjust the -p values if these limits are ever too tight.
+# if program_installed claude && program_installed systemd-run; then
+#     claude() {
+#         systemd-run --user --scope --quiet \
+#             -p CPUQuota=50% \
+#             -p MemoryMax=6G \
+#             -p TasksMax=512 \
+#             -- command claude "$@"
+#     }
+# fi
+
+# Syntax highlighting
+if [ -f /usr/share/zsh-syntax-highlighting/zsh-syntax-highlighting.zsh ]; then
+    source /usr/share/zsh-syntax-highlighting/zsh-syntax-highlighting.zsh 
+fi
+
+# fzf fuzzy finder
+if program_installed fzf; then
+    # TODO: This is broken on debian fzf (no --zsh)
+    source <(fzf --zsh)
+fi
+
+# thefuck command correction
+if program_installed fuck; then
+    eval "$(thefuck --alias)"
+fi
+
+# pyenv-virtualenv (for managing virtualenvs for different python versions)
+if program_installed pyenv; then
+    export PYENV_ROOT="$HOME/.pyenv"
+    export PYENV_VIRTUALENV_DISABLE_PROMPT=1
+    [[ -d $PYENV_ROOT/bin ]] && export PATH="$PYENV_ROOT/bin:$PATH"
+    eval "$(pyenv init - zsh)"
+    # eval "$(pyenv virtualenv-init -)"
+fi
+
+# oh-my-zsh plugins (must come after all initialization above)
+plugins=(archlinux colored-man-pages colorize command-not-found cp docker docker-compose fzf git history history-substring-search nmap npm pip poetry pyenv macos rsync snap ssh sudo systemd terraform thefuck tmux tmuxinator vi-mode virtualenv yarn zsh-interactive-cd zsh-navigation-tools)
+
 # Local overrides
 if [ -f $HOME/.zshrc_local ]; then
     source $HOME/.zshrc_local
 fi
 
-if [ -f ~/.fzf.zsh ]; then
-    source ~/.fzf.zsh
+# Fun stupid opt-in stuff on new shell. Enable these in .profile.local
+if program_installed neofetch; then
+    if [ ! -n "$NO_NEOFETCH" ] || [ "$NO_NEOFETCH" -eq 1 ]; then 
+    else
+        neofetch
+    fi
 fi
-
-if [ -f /usr/share/zsh-syntax-highlighting/zsh-syntax-highlighting.zsh ]; then
-    source /usr/share/zsh-syntax-highlighting/zsh-syntax-highlighting.zsh 
+if [ -n "$NO_ZSHRC_COWSAY" ] && [ ! "$NO_ZSHRC_COWSAY" -eq 1 ]; then
+    # Make a random (cow?) with a random face say something
+    fortune -a | fmt -80 -s | cowthink -$(shuf -n 1 -e b d g p s t w y)  -f $(shuf -n 1 -e $(cowsay -l | tail -n +2)) -n
 fi
-
-# pyenv-virtualenv (for managing virtualenvs for different python versions)
-#export PYENV_VIRTUALENV_DISABLE_PROMPT=1
-#eval "$(pyenv init -)"
-#eval "$(pyenv virtualenv-init -)"

dotfiles-local.sh

@@ -0,0 +1,274 @@
+#!/bin/bash
+
+# Source .profile.local in case it's been recently updated with repo
+source "$HOME/.profile"
+if [ -f "$HOME/.profile.local" ]; then
+    set -a
+    source "$HOME/.profile.local"
+    set +a
+fi
+if [ -f "$HOME/.dotfiles-config" ]; then
+    source "$HOME/.dotfiles-config"
+else
+    echo "Dotfiles repository not set in $HOME/.dotfiles-config"
+    echo "Please run ./install.sh in dotfiles repository and exit to create ~/.dotfiles-config"
+    exit 1
+fi
+if [ -z "$DOTFILES_LOCAL_REPOSITORY" ]; then
+    echo "Local dotfiles repository not set. Please set this in .profile"
+    exit 1
+fi
+source "$DOTFILES_DIR/functions.sh"
+
+# Check if running interactively
+if [ -t 0 ]; then
+    # Interactive session
+    interactive=1
+else
+    # Non-interactive session (e.g. Coder workspace initialization)
+    interactive=0
+fi
+
+dir="$( cd -- "$( dirname -- "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )" # dotfiles-local repository directory
+locals_dir="$dir/dependencies/dotfiles-local"
+config_dir="$locals_dir"/config
+dotfiles_packages_root="$DOTFILES_DIR/packages"
+
+package_lists="
+apt
+arch
+aur
+brew
+flatpak
+pipx
+snap
+"
+
+home_files="
+bashrc_local
+zshrc_local
+profile.local
+tmux_local.conf
+nvim_local.vimrc
+"
+
+configs="
+i3/config.local
+"
+
+# Clone dotfiles_local if not present
+if [ ! -d "$locals_dir" ]; then
+    echo "Cloning local dotfiles repository:"
+    echo "$DOTFILES_LOCAL_REPOSITORY"
+    git clone "$DOTFILES_LOCAL_REPOSITORY" "$locals_dir"
+fi
+
+cd "$locals_dir"
+
+if ! program_installed git; then
+    echo "git not installed, please install and rerun"
+    exit 1
+fi
+
+# Ask machine name and set branch
+if [ -n "$1" ]; then
+    branch_name="$1"
+else
+    if [ "$interactive" == 0 ]; then
+        echo "Non-interactive sessions must specify a branch name. Rerun with:"
+        echo "> ./dotfiles-local.sh {branch_name}"
+        exit 1
+    fi
+    echo -n "What machine name would you like to use for this branch? [$(hostname)] "
+    read response
+    if [ -z "$response" ]; then
+        # echo "Please enter a valid name for this machine's branch. Rerun with:"
+        # echo "> ./dotfiles-local.sh {branch_name}"
+        # exit 1
+        branch_name="$(hostname)"
+    else
+        branch_name="$response"
+    fi
+fi
+
+# Check if already on branch
+if [ $(git rev-parse --abbrev-ref HEAD) == "$branch_name" ]; then
+    echo "Already on branch $branch_name"
+else
+    # Check if branch already exists
+    git ls-remote --exit-code --heads origin "$branch_name" > /dev/null
+    if [ $? == 0 ]; then
+        echo "$branch_name branch exists, checking out existing branch"
+        # TODO: This doesn't work if the local branch already exists
+        # Should just check if we're already on the branch
+        git checkout -b "$branch_name" "origin/$branch_name"
+    else
+        echo "$branch_name branch doesn't exist yet, creating and checking out new branch"
+        git checkout main
+        git checkout -b "$branch_name"
+    fi
+fi
+echo ""
+
+# Move any existing local installation script into repo and symlink out
+skip=0
+if [ -f "$DOTFILES_DIR/install_local.sh" ]; then
+    echo "Discovered local installation script install_local.sh"
+    # Check if file is a symlink
+    if [[ -L "$DOTFILES_DIR/install_local.sh" ]]; then
+        # TODO: Make sure that it's actually linked from here and not somewhere else
+        echo "Skipping: install_local.sh because file already linked"
+        skip=1
+    elif [[ -f "$DOTFILES_DIR/install_local.sh" ]]; then
+        if [[ -f "$locals_dir/install_local.sh" ]]; then
+            # TODO: Do we want to overwrite what's in dotfiles-local?
+            echo "Replacing copy in dotfiles-local with local copy and symlinking back"
+        else
+            echo "Moving into dotfiles-local and symlinking back"
+        fi
+        mv "$DOTFILES_DIR/install_local.sh" "$locals_dir/"
+    fi
+fi
+if [[ $skip == 0 ]] && [[ -f "$locals_dir/install_local.sh" ]]; then
+    ln -s "$locals_dir/install_local.sh" "$DOTFILES_DIR/install_local.sh"
+    echo ""
+elif [[ skip == 0 ]]; then
+    echo "No install_local.sh script found in dotfiles-local or dotfiles. Skipping"
+    echo ""
+elif [[ $skip == 1 ]]; then
+    echo ""
+fi
+
+# Move any existing local packages into repo and symlink out
+while IFS= read -r package_manager || [[ -n $package_manager ]]; do
+    if [[ "$package_manager" == '#'* || -z "${package_manager// }" ]]; then
+        continue
+    fi
+    skip=0
+    if [ -f "$dotfiles_packages_root/$package_manager.local" ]; then
+        echo "Discovered local packages for $package_manager"
+
+        # Check if file is a symlink
+        if [[ -L "$dotfiles_packages_root/$package_manager.local" ]]; then
+            # TODO: Make sure that it's actually linked from here and not somewhere else
+            echo "Skipping: $package_manager.local because file already linked"
+            skip=1
+        elif [[ -f "$dotfiles_packages_root/$package_manager.local" ]]; then
+            if [[ -f "$locals_dir/packages/$package_manager.local" ]]; then
+                # TODO: Do we want to overwrite what's in dotfiles-local?
+                echo "Replacing copy in dotfiles-local with local copy and symlinking back"
+            else
+                echo "Moving into dotfiles-local and symlinking back"
+            fi
+            mv "$dotfiles_packages_root/$package_manager.local" "$locals_dir/packages/"
+        fi
+    fi
+    if [[ $skip == 0 ]] && [[ -f "$locals_dir/packages/$package_manager.local" ]]; then
+        ln -s "$locals_dir/packages/$package_manager.local" "$dotfiles_packages_root/$package_manager.local"
+        echo ""
+    elif [[ $skip == 0 ]]; then
+        echo "No $package_manager.local found in dotfiles-local/packages or dotfiles/packages. Skipping"
+        echo ""
+    elif [[ $skip == 1 ]]; then
+        echo ""
+    fi
+done < <(printf '%s' "$package_lists")
+
+# Move any existing local dotfiles into repo and symlink out
+# TODO: These only symlink to dotfiles, they don't symlink to the actual locations. Should probably fix that
+while IFS= read -r config || [[ -n $config ]]; do
+    if [[ "$config" == '#'* || -z "${config// }" ]]; then
+        continue
+    fi
+    skip=0
+    if [ -f "$HOME/.$config" ]; then
+        echo "Discovered local dotfile ~/.$config"
+
+        # Check if file is a symlink
+        if [[ -L "$HOME/.$config" ]]; then
+            # TODO: Make sure that it's actually linked from here and not somewhere else
+            echo "Skipping: ~/.$config because file already linked"
+            skip=1
+        elif [[ -f "$HOME/.$config" ]]; then
+            if [[ -f "$locals_dir/config/$config" ]]; then
+                # TODO: Do we want to overwrite what's in dotfiles-local?
+                echo "Replacing copy in dotfiles-local with local copy and symlinking back"
+            else
+                echo "Moving into dotfiles-local and symlinking back"
+            fi
+            mv "$HOME/.$config" "$config_dir/$config"
+        fi
+    elif [ -f "$locals_dir/config/$config" ]; then
+        echo "No local dotfile in ~/.$config but present in dotfiles-local. Symlinking"
+    fi
+    if [[ $skip == 0 ]] && [[ -f "$locals_dir/config/$config" ]]; then
+        ln -s "$locals_dir/config/$config" "$HOME/.$config"
+        echo ""
+    elif [[ $skip == 0 ]]; then
+        echo "No $config file found in dotfiles-local/config or ~/. Skipping"
+        echo ""
+    elif [[ $skip == 1 ]]; then
+        echo ""
+    fi
+done < <(printf '%s' "$home_files")
+
+# Move any existing files in .config into repo and symlink out
+while IFS= read -r config || [[ -n $config ]]; do
+    if [[ "$config" == '#'* || -z "${config// }" ]]; then
+        continue
+    fi
+    skip=0
+    if [ -f "$HOME/.config/$config" ]; then
+        echo "Discovered local dotfile ~/.config/$config"
+
+        # Check if file is a symlink
+        if [[ -L "$HOME/.config/$config" ]]; then
+            # TODO: Make sure that it's actually linked from here and not somewhere else
+            echo "Skipping: ~/.config/$config because file already linked"
+            skip=1
+        elif [[ -f "$HOME/.config/$config" ]]; then
+            if [[ -f "$locals_dir/config/$config" ]]; then
+                # TODO: Do we want to overwrite what's in dotfiles-local?
+                echo "Replacing copy in dotfiles-local with local copy and symlinking back"
+            else
+                echo "Moving into dotfiles-local and symlinking back"
+            fi
+            mv "$HOME/.config/$config" "$config_dir/$config"
+        fi
+    elif [ -f "$locals_dir/config/$config" ]; then
+        echo "No local dotfile in ~/.config/$config but present in dotfiles-local. Symlinking"
+    fi
+    if [[ $skip == 0 ]] && [[ -f "$locals_dir/config/$config" ]]; then
+        ln -s "$locals_dir/config/$config" "$HOME/.config/$config"
+        echo ""
+    elif [[ $skip == 0 ]]; then
+        echo "No $config file found in dotfiles-local/config or ~/.config . Skipping"
+        echo ""
+    elif [[ $skip == 1 ]]; then
+        echo ""
+    fi
+done < <(printf '%s' "$configs")
+
+# Check if git repo has changes
+if [[ `git status --porcelain` ]]; then
+    # Changes found
+    # sync dotfiles to git
+    if [ "$interactive" == 0 ]; then
+        echo "Syncing local dotfiles to git branch. [$branch_name]"
+    else
+        echo -n "Would you like to push dotfiles-local to git? [$branch_name] (y/n) "
+        read response
+        if [[ $response != 'y' ]] && [[ $response != 'Y' ]]; then
+            exit 0
+        fi
+    fi
+    git add -A
+    git commit -m "Automated sync"
+    git push origin "$branch_name"
+    echo "dotfiles-local synced to git. [$branch_name]"
+else
+    # No changes found
+    echo "No changes found, not pushing branch to git remote"
+fi
+
+cd -

functions.sh

@@ -1,28 +1,44 @@
-# TODO: Flip the return values of these, 0 should be true by POSIX convention
-
-# Returns 1 if program is installed and 0 otherwise
+# Returns 0 if program is installed and 1 otherwise
 function program_installed {
-    local return_=1
+    local return_=0
 
-    type $1 >/dev/null 2>&1 || { local return_=0; }
+    type $1 >/dev/null 2>&1 || { local return_=1; }
 
-    echo "$return_"
+    return "$return_"
 }
 
-# Returns 1 if service is enabled and 0 otherwise
+# Returns 0 if service is enabled and 1 otherwise
 function service_enabled {
-    local return_=1
+    local return_=0
 
-    systemctl is-enabled --quiet $1 || { local return_=0; }
+    systemctl is-enabled --quiet $1 || { local return_=1; }
 
-    echo "$return_"
+    return "$return_"
 }
 
 # Returns 1 if user service is enabled and 0 otherwise
 function user_service_enabled {
-    local return_=1
+    local return_=0
 
-    systemctl --user is-enabled --quiet $1 || { local return_=0; }
+    systemctl --user is-enabled --quiet $1 || { local return_=1; }
 
-    echo "$return_"
+    return "$return_"
+}
+
+function update_dotfiles_config {
+    if [ "$#" != 2 ]; then
+        echo "Usage: update_dotfiles_config ENV_VARIABLE VALUE"
+        exit 1
+    fi
+    local var="$1"
+    local val="$2"
+
+    if [ ! -f "$HOME/.dotfiles-config" ]; then
+        touch "$HOME/.dotfiles-config"
+    fi
+    if [ $(cat "$HOME/.dotfiles-config" | grep -Eq "^export $1=.*$") ]; then
+        sed -i "s/$1=.*$/$1=$2/" "$HOME/.dotfiles-config"
+    else
+        echo "export $1=$2" >> "$HOME/.dotfiles-config"
+    fi
 }

packages/apt.global

@@ -0,0 +1,25 @@
+vim
+neovim
+silversearcher-ag
+fzf
+powerline
+thefuck
+tree
+nodejs
+zsh
+htop
+jq
+npm
+tree-sitter-cli
+ripgrep
+shellcheck
+bubblewrap
+socat
+
+# Agent sandboxing
+bubblewrap
+socat
+
+# Useless stuff
+fortune-mod
+cowsay